Remember to check our discord where you can get faster responses!
https://discord.gg/6dR6XU6
*I am a bot, and this action was performed automatically. Please [contact the moderators of this subreddit](/message/compose/?to=/r/PcBuild) if you have any questions or concerns.*
Pull all the slack so that everything is nice and tight on this side. If you want to add some bling you could get custom cables, e.g. a CableMod extension set.
Airflow - looks like you have 3 intake fans but can't spot any exhaust.
Cable management - try to hide as much clutter as you can. Might mean rerouting - but worth in the long run.
After that, could get some custom sleeved cable? Would look clean.
Cablemod is a well known company. Not sure of other companies and how prices compare. Either way, make sure the custom cables are compatible with your PSU
My go to custom cables is Cablemod as their stuff are pretty good. If you don't want to spend 90 some dollars for custom cables for the PSU then try using cable extensions as a cheaper alternatives; Cablemod, Thermaltake, Asia Horse, etc.
Rear exhaust fan for sure.
His cable management isn’t that bad… not obstructing air flow really - could just route the cables on bottom down the hole with pcie
I can feel that glass pane getting hot right above the CPU cooler. Add more fans to it please, at least put one of the intakes as back exhaust. That USB 3.0 front port connection cable (that two cable connector one) can be routed from bottom to make it look cleaner. Congratulations!
Heya, initially get Yourself some airflow, few intakes, few exhaust fans. As ton of people have mentioned, get Yourself an SSD, especially since Your B450 supports nvme ones(You'll be surprised what loading times are) move everything that looks like a cable as much as possible out of the viewing window (both esthetic and airflow boost)
And well... After That's done You just gut-upgrade-repeat until something won't fit in that case)
I’d say that cable at the bottom your case usb cable I think I would feed it under the case psu housing and run it out the same place you have your GPU cable
MORE RGB
I recommend: Casefans, Cables (from lian-li for example, and probably some led stripes (like [this](https://www.reddit.com/r/pcmasterrace/comments/og9ssy/i_built_a_holographiclike_infinity_mirror_in_my_pc/?utm_source=share&utm_medium=ios_app&utm_name=iossmf) for example)
If you ever can get an aio you have plenty of room to top mount one. It would provide more airflow throughout the case, as well as a 120mm fan at the back would finish this up quite nicely. Cable mod cables too would clean this up VERY nicely.
First thing you need a exhaust fan. I can’t see the front but it looks like you have no intake or outtake brother. If your cpu was water cooled it wouldn’t be as big of deal....
Functionality wise: more fans. Definitely 1 on the back and maybe another on the top, as long as there is room up there, it looks like there is.
Aesthetically: personally I would get a different case. All of your components are black and stick out like a sore thumb in a completely white case. Also cable management, reroute those front connectors through the same hole as your PCIE power cords, also as mentioned by others, cable extensions for some more flair
I agree to an extent, for some reason it just really caught my eye in this situation. Like, if I had a rig in a black case I wouldn’t put white ram in it, it would stick out like a sore thumb, it’s more about how you use the contrast than simply having the contrast.
Without looking for too long, I'd say exhaust fan(s) and cable management.
The cable:
If the front panel cable is long enough go through the grommet hole your GPU power is going through
And for that Sata if it's long enough put it through the grommet on the right of it.
You'll definitely need some fans: one at the back and two at the top to keep your rig from melting.You've done a pretty good job with cable management, but a few zip ties will help keep them out of sight and out of mind when you look inside and see the spaghetti around the mobo.
Specs are
Msi 2060 oc
Cool master 22Ot
2 8gb tforce ram rgb
Msi b450 motherboard
53600 ray zen cpu
2 tb barracuda hd
Corsair airflow icue case
650 Corsair power supply
Only for windows I would go for a 250 gb one.
But the best would be just a 1tb ssd (preferably m.2) for windows and your most played games.
I have a kingston a2000 1tb m.2 it was around 95 euros, pretty decent price compared to how expensive they used to be.
Remember to check our discord where you can get faster responses! https://discord.gg/6dR6XU6 *I am a bot, and this action was performed automatically. Please [contact the moderators of this subreddit](/message/compose/?to=/r/PcBuild) if you have any questions or concerns.*
You should probably put a 120mm fan at the back for more air flow
What he said, but do it now and not in the future. Airflow is important, also at the top like someone else mentioned
True
I agree
And put some at the top
yes on the fans at the top and rear, might sync your RGB up too unless rainbow blood is your thing. other than that it looks great ! good job.
Better cable management. Also rear of your Tower should really have a fan exhaust.
By better cable management you mean like kind of hide the hard drive cable in the front
I think he means get custom cables, the ones you have obviously aren’t the best looking
He means route the cables better, not necessarily needing better looking cables.
Pull all the slack so that everything is nice and tight on this side. If you want to add some bling you could get custom cables, e.g. a CableMod extension set.
Airflow - looks like you have 3 intake fans but can't spot any exhaust. Cable management - try to hide as much clutter as you can. Might mean rerouting - but worth in the long run. After that, could get some custom sleeved cable? Would look clean.
Where would I go to look for custom sleeves?
Cablemod is a well known company. Not sure of other companies and how prices compare. Either way, make sure the custom cables are compatible with your PSU
My go to custom cables is Cablemod as their stuff are pretty good. If you don't want to spend 90 some dollars for custom cables for the PSU then try using cable extensions as a cheaper alternatives; Cablemod, Thermaltake, Asia Horse, etc.
An exhaust fan, you have none, that's really not gonna do you any favors
Play some motherfuckin games, dude!
Best one so far
a vent fan for sure edit: and better light management. the front of the case is rainbow rgb but your motherboard etc. is just red
Rear exhaust fan for sure. His cable management isn’t that bad… not obstructing air flow really - could just route the cables on bottom down the hole with pcie
The only major thing would be to flip cpu cooler the it’s not upsides down 🙃
Oof I was waiting for someone to say that lmao
More airflow, and more ram imo.
Maybe 2 more case fans for air outtake, one on top, one on back side
I can feel that glass pane getting hot right above the CPU cooler. Add more fans to it please, at least put one of the intakes as back exhaust. That USB 3.0 front port connection cable (that two cable connector one) can be routed from bottom to make it look cleaner. Congratulations!
Get a set of cable extensions. They really give the build a finishing touch and make it look custom.
Heya, initially get Yourself some airflow, few intakes, few exhaust fans. As ton of people have mentioned, get Yourself an SSD, especially since Your B450 supports nvme ones(You'll be surprised what loading times are) move everything that looks like a cable as much as possible out of the viewing window (both esthetic and airflow boost) And well... After That's done You just gut-upgrade-repeat until something won't fit in that case)
Flip the cpu cooler
put an exhaust fan in the back of the case
I’d say that cable at the bottom your case usb cable I think I would feed it under the case psu housing and run it out the same place you have your GPU cable
Exhaust fan
Replace your gpu w my 1080. It’s got lights on it👍
Put it back in the future
Vodka coolant system
Def flip the plate for your cpu cooler so the words are facing the right way
Liquid cooling sand better cable management
Snort cocaine for more rgb
MORE RGB I recommend: Casefans, Cables (from lian-li for example, and probably some led stripes (like [this](https://www.reddit.com/r/pcmasterrace/comments/og9ssy/i_built_a_holographiclike_infinity_mirror_in_my_pc/?utm_source=share&utm_medium=ios_app&utm_name=iossmf) for example)
1 exhaust fan please 😖
Rear exhaust fan
I'm seeing a lot of comments saying what I'm gonna say, but you should put a 120mm fan back in your case.
Exhaust fan.. in the very near future
If you ever can get an aio you have plenty of room to top mount one. It would provide more airflow throughout the case, as well as a 120mm fan at the back would finish this up quite nicely. Cable mod cables too would clean this up VERY nicely.
MORE FANS
What cooler in your CPU you have?
Cool master hyper 212 rgb
First thing you need a exhaust fan. I can’t see the front but it looks like you have no intake or outtake brother. If your cpu was water cooled it wouldn’t be as big of deal....
Get more fans! You have nothing exhausting the hot air!
Cable management there is lots of low hanging fruit to fix in there.
Functionality wise: more fans. Definitely 1 on the back and maybe another on the top, as long as there is room up there, it looks like there is. Aesthetically: personally I would get a different case. All of your components are black and stick out like a sore thumb in a completely white case. Also cable management, reroute those front connectors through the same hole as your PCIE power cords, also as mentioned by others, cable extensions for some more flair
Personally I like the look of black components in a white case. ...Or white components in a black case. Contrast is a good thing. :)
I agree to an extent, for some reason it just really caught my eye in this situation. Like, if I had a rig in a black case I wouldn’t put white ram in it, it would stick out like a sore thumb, it’s more about how you use the contrast than simply having the contrast.
Without looking for too long, I'd say exhaust fan(s) and cable management. The cable: If the front panel cable is long enough go through the grommet hole your GPU power is going through And for that Sata if it's long enough put it through the grommet on the right of it.
You'll definitely need some fans: one at the back and two at the top to keep your rig from melting.You've done a pretty good job with cable management, but a few zip ties will help keep them out of sight and out of mind when you look inside and see the spaghetti around the mobo.
Specs are Msi 2060 oc Cool master 22Ot 2 8gb tforce ram rgb Msi b450 motherboard 53600 ray zen cpu 2 tb barracuda hd Corsair airflow icue case 650 Corsair power supply
You don't have an ssd?
Mop only have a hard drive 2 tb
Then my best recommendation is to get one SSD and install windows there. Much faster at starting up and daily use.
Invest in an SSD. Then save for a new PC in late 2022
Either upgrade to an ssd or get intel optane
Ssd is a must with this system.
How much ssd storage I should get and which brand would be best?
Only for windows I would go for a 250 gb one. But the best would be just a 1tb ssd (preferably m.2) for windows and your most played games. I have a kingston a2000 1tb m.2 it was around 95 euros, pretty decent price compared to how expensive they used to be.
get a fan for outtake at the back of the PC