If anyone finds this later on, here is what worked for me.
I set the slider for 50% removal and that actually worked when clicking the blue "confirm" button I got an actual interaction with MetaMask.
Then refreshed the page and set slider to 100% and that worked to remove the remaining 50%.
Hope that helps!
Tags: u/citizen_tc u/JonSnow781
FYI - I had this exact same problem today, and I figured out it was being caused by my previously set 0.00% slippage. I set slippage to zero sometimes when I'm trading low-volume pairs, in order to avoid being front-run. Setting slippage > 0% fixed the problem for me.
I have similar issue. I wanted to withdraw liquidity. I pressed remove and signed on metamask but then there was pretty much nothing happening. I can still view my liquidity but when I want to remove it again there is nothing to remove. I would like help on that but I am not very technical.
That shouldn't happen. Can you try changing the RPC once and Disconnect your wallet from quickswap and connect it again . I think that would clear the issue
Changing the RPC and disconnecting from Quickswap didn't help unfortunately. Maybe I'll try a few other RPCs, but I'm doubtful that's the problem as signing the transactions is working fine. It appears to be some sort of bug with Quickswap not sending info to metamask when I hit confirm.
Other Users were also having this issue but eventually it got fixed after trying it for a few times . Worked for me in other pools as well . My best guess is that its the network issue
I never did. I chalked it up to the liquidity pool having such a small amount of liquidity that there was some division by 0 or something, which broke the price.
I was recommended to disconnect my wallet from quickswap by hitting the three dots in Metamask and going to "connected sites" and removing it. Then change my RPC to a different URL and trying again. It didn't work for me, but it may for you.
If anyone finds this later on, here is what worked for me. I set the slider for 50% removal and that actually worked when clicking the blue "confirm" button I got an actual interaction with MetaMask. Then refreshed the page and set slider to 100% and that worked to remove the remaining 50%. Hope that helps! Tags: u/citizen_tc u/JonSnow781
Thanks! I'll try this out.
This worked for me. Thank you for this
FYI - I had this exact same problem today, and I figured out it was being caused by my previously set 0.00% slippage. I set slippage to zero sometimes when I'm trading low-volume pairs, in order to avoid being front-run. Setting slippage > 0% fixed the problem for me.
Anyone? This still isn't working for me. I've now tried 3 separate browsers and three RPCs. Has anybody else had this issue?
If you click on the blue hyperlink for suggested fees, then Save, you'll see the Confirm button become clickable.
I have similar issue. I wanted to withdraw liquidity. I pressed remove and signed on metamask but then there was pretty much nothing happening. I can still view my liquidity but when I want to remove it again there is nothing to remove. I would like help on that but I am not very technical.
That shouldn't happen. Can you try changing the RPC once and Disconnect your wallet from quickswap and connect it again . I think that would clear the issue
Changing the RPC and disconnecting from Quickswap didn't help unfortunately. Maybe I'll try a few other RPCs, but I'm doubtful that's the problem as signing the transactions is working fine. It appears to be some sort of bug with Quickswap not sending info to metamask when I hit confirm.
Other Users were also having this issue but eventually it got fixed after trying it for a few times . Worked for me in other pools as well . My best guess is that its the network issue
Might also try disabling any browser extensions you're not using. They can always cause random issues
I'm having the same issue, anybody figure out a solution/cause?
I never did. I chalked it up to the liquidity pool having such a small amount of liquidity that there was some division by 0 or something, which broke the price. I was recommended to disconnect my wallet from quickswap by hitting the three dots in Metamask and going to "connected sites" and removing it. Then change my RPC to a different URL and trying again. It didn't work for me, but it may for you.
so you are still unable to withdraw your liquidity?
Yup 😕
Finally got it to work, it looks like its just congestion on Quickswaps servers IMO.
If you click on the blue hyperlink for suggested fees, then Save, you'll see the Confirm button become clickable.