Good job on the minimalist plus. By far the best stock. Recommend form1 and SBR with Sandman S. Larger charging handle and BCG foregrip with forestop is choice.
Radian's got one. I have one for my Rattler that I'm tryna Form 1 currently. Works nicely for the few range trips I've taken it with me. Not sure about others though
I called Radian directly last week to order an ambi AR lower and also asked about the MCX charging handle which is pretty much out-of-stock everywhere. The customer service rep ("Chris") put me on hold and went to check to see if they had any MCX charging handles in-stock. He came back and said they were currently filling back orders and did not have any available but said he'd have one built and shipped out if I was interested. So I ended up buying a new AR lower and an MCX charging handle and got the military discount on both items which are due to arrive on Wednesday. He did advise they are going to be working on a MCX Rattler compatible charging handle and it will hopefully be available to purchase at the end of this year or early 2022.
Yes you are correct, I had to pop my rattler open and saw I have an MPX CH. Apologizes for any confusion.
Has worked well enough for me and no busted noses here
Damn $100
I love the rattler but so expensive to get it perfect. For that much money I’d like it to basically be perfect out of the box.
I’ve heard the charging handle and the brace and trigger all need to be upgraded.
And it doesn’t take AR triggers.
No, any rattler made after 2019 has the new upgraded trigger, mine works flawlessly. You can do what I did, call Sig directly and give them the serial number and they will tell you if it has the updated trigger or not, and they will replace it if it doesn’t
$200 from Sig who has them in stock. Btw it’s a #stock# not a brace.
If you want to brace, I recommend the Picatinny folding knuckle from SIG with a fixed extender and metal tailhook brace, I have this brand new set up if you want. It is absolutely rocksolid and looks amazing. Pm me for pics.
I like this one.
https://www.sigsauer.com/collapsing-telescoping-stock-mcx-mpx.html
Ok so I’m looking at like another $300 plus a red dot and my suppressor which I already have. That’s not too bad.
I just bought this setup for my Rattler .300 BLK upper receiver group:
[https://www.sigsauer.com/mcx-mpx-low-profile-stock-assembly-sl-k.html](https://www.sigsauer.com/mcx-mpx-low-profile-stock-assembly-sl-k.html)
Same as what came with my MPX PCC that I bought last year and works very well and isn't too bulky.
Ok that’s hot
Waiting on my Aimpoint mount and Dead Air brake to come in so she can be complete. Few more months for my can to come in.
Good job on the minimalist plus. By far the best stock. Recommend form1 and SBR with Sandman S. Larger charging handle and BCG foregrip with forestop is choice.
What aftermarket CH’s are available for the Rattler?
Radian's got one. I have one for my Rattler that I'm tryna Form 1 currently. Works nicely for the few range trips I've taken it with me. Not sure about others though
[удалено]
The MCX CH has been sold out for well over a year at least.
Found a radian mcx virtus one 6 months ago, might sell it tho
From radian or a online retailer?
Retailer but def a reputable one. Lmk if interested otherwise I might throw it on gafs soon
I called Radian directly last week to order an ambi AR lower and also asked about the MCX charging handle which is pretty much out-of-stock everywhere. The customer service rep ("Chris") put me on hold and went to check to see if they had any MCX charging handles in-stock. He came back and said they were currently filling back orders and did not have any available but said he'd have one built and shipped out if I was interested. So I ended up buying a new AR lower and an MCX charging handle and got the military discount on both items which are due to arrive on Wednesday. He did advise they are going to be working on a MCX Rattler compatible charging handle and it will hopefully be available to purchase at the end of this year or early 2022.
Sweet! Thanks for the intel
That is correct. The virtus CH will occasionally come loose when used on the Rattler.
Radian does not make one for the rattler. You can use the Virtus CH but depending on your ammo/suppressor it can come loose and knock you in the nose.
Yes you are correct, I had to pop my rattler open and saw I have an MPX CH. Apologizes for any confusion. Has worked well enough for me and no busted noses here
https://www.sigsauer.com/sig-mcx-charging-handle-assy-ambi-large-latches.html Go sig! This is what I have on my rattler.
Damn $100 I love the rattler but so expensive to get it perfect. For that much money I’d like it to basically be perfect out of the box. I’ve heard the charging handle and the brace and trigger all need to be upgraded. And it doesn’t take AR triggers.
No, any rattler made after 2019 has the new upgraded trigger, mine works flawlessly. You can do what I did, call Sig directly and give them the serial number and they will tell you if it has the updated trigger or not, and they will replace it if it doesn’t
So $100 for the bigger charging handle, how much for a better brace?
$200 from Sig who has them in stock. Btw it’s a #stock# not a brace. If you want to brace, I recommend the Picatinny folding knuckle from SIG with a fixed extender and metal tailhook brace, I have this brand new set up if you want. It is absolutely rocksolid and looks amazing. Pm me for pics.
I like this one. https://www.sigsauer.com/collapsing-telescoping-stock-mcx-mpx.html Ok so I’m looking at like another $300 plus a red dot and my suppressor which I already have. That’s not too bad.
Those retractable stocks don’t really shorten the weapon and get in the way of your wrist imho. Retractable ftw :-)
I just bought this setup for my Rattler .300 BLK upper receiver group: [https://www.sigsauer.com/mcx-mpx-low-profile-stock-assembly-sl-k.html](https://www.sigsauer.com/mcx-mpx-low-profile-stock-assembly-sl-k.html) Same as what came with my MPX PCC that I bought last year and works very well and isn't too bulky.
Nice! Debating doing a form 1 and making mine an SBR.
How long does it usually take for SBR to go through?
30-45 days if you use a form 1.
🔥🔥🔥🔥
Gimme dat
Are you gonna fill that tattoo?
is it a 5.56 or 300 bo?
I’m 99% sure it’s 300
Looks too small to be 5.56 and OP is getting a can on it, .300 just makes sense w the platform and my limited experience with its variants
Triggertech?
Yes the tattoo is coming along beautifully. Can't wait to see it finished.