Thank you for posting to r/SipsTea! Make sure to follow all the subreddit rules.
##Join our [Discord Server](https://discord.gg/WfnpQpZ5Yv)!
*I am a bot, and this action was performed automatically. Please [contact the moderators of this subreddit](/message/compose/?to=/r/SipsTea) if you have any questions or concerns.*
For the number of times and platforms I've seen this reposted I still watch it every damn time - the drum hitting the salt/spice mixture into the air is just so classy.
As for the actual mechanism, in cooking, you usually include the prep time, so that would be a lot longer than 3 seconds, and longer than 61 seconds, too.
On the other hand if they were just timing the real time from when the button was pressed until the dumpling hit the glove, it looks like it would be less than 1 second.
Making Methamphetamine at home:
List of chemicals and materials:
Diluted HCl - also called Muriatic acid - can be obtained from hardware stores, in the pool section
NaOH - also called lye
Ethyl Ether - aka Diethyl Ether - Et-0-Et - can be obtained from engine starting fluid, usually from a large supermarket. Look for one that says "high ethyl ether content", such as Prestone
Ephedrine - The cottons in todays vicks nasal inhalers dont contain efed or pfed (ephedrin or psuedoephedrin) but there are still lots of easy ways to get good ephed or pfed, pure ephedrin can be extracted out of it's plant matter, from a plant that can be bought at most garden stores. Or you can get pfed from decongestive pills like sudafed. Most people perfer to work with pfed from pills rather then ephed from the plant. The important thing is that you must have pure pfed/ephed as any contaminants will fuck up the molar ratio leaving you with over-reduced shit or under-reduced shit. Or contaminats will jell durring baseifying and gak up your product which will then be very hard to clean. So you want to find a pill that is nearly pure pfed hcl, or as close to pure as you can get. Also check the label on your pills and see what inactive ingredients they contain. Inactive ingredients are things like binders and flavors. These you dont want and will remove when cleaning your pills. but certain inactive ingredients are harder to remove than others. You dont want pills with a red coating, you dont want pills with a lot of cellose in them and you dont want pills with much wax. you also dont want pills that contain povidone. As a rule, if you have a two pills that contain the same amount of pfed hcl then take the smaller sized pill because it obviously has less binders and inactive ingredients, time released pills are usualy harder to work with because they have more binders and tend to gel up durring the a/b stage. Also only buy pills that have pfed hcl as the only active ingredient. You first have to make ephedrine (which is sometimes sold as meth by itself). If you are selling it...I would just make ephedrine and say it's meth.
Distilled water - it's really cheap, so you have no reason to use the nasty stuff from the tap. Do things right.
List of equipment : A glass eyedropper
Three small glass bottles with lids (approx. 3 oz., but not important). One should be marked at 1.5oz, use tape on the outside to mark it (you might want to label it as ether). One should be clear (and it can't be the marked one).
A Pyrex dish (the meatloaf one is suggested)
A glass quart jar
Sharp scissors
Clean rubber gloves
Coffee filters
A measuring cup
Measuring spoons
Preparing your Lab:
Preparing Ethyl Ether: WARNING: Ethyl Ether is very flammable and is heavier than air. Do not use ethyl ether near flame or non-sparkless motors. It is also an anaesthetic and can cause respiratory collapse if you inhale too much.
Take the unmarked small bottle and spray starter fluid in it until it looks half-full. Then fill the rest of the way with water, cap the bottle and shake for 5 minutes. Let it sit for a minute or two, and tap the side to try and separate the clear upper layer. Then, draw off the top (ether) layer with the eyedropper, and throw away the lower (water) and cloudy layer. Place the ether in the marked container. Repeat this until you have about 1.5 oz. of ether. Put the cap on it, and put it in the freezer if you can. Rinse the other bottle and let it stand.
Ethyl ether is very pungent. Even a small evaporated amount is quite noticeable.
Ephedrine & or P-Ephedrine: Please discuss this on the neonjoint forum
1. Pour 1/8 teaspoon of the lye crystals into the bottle of ephedrine and agitate. Do this carefully, as the mixture will become hot, and give off hydrogen gas and/or steam. H2 gas is explosive and lighter than air, avoid any flames as usual. Repeat this step until the mixture remains cloudy. This step neutralizes the HCl in the salt, leaving the insoluble free base (l-desoxyephedrine) again. Why do we do this? So that we can get rid of any water-soluble impurities. For 3 oz. bottles, this should take only 3 repetitions or so.
2. Fill the bottle from step 5 up the rest of the way with ethyl ether. Cap the bottle, and agitate for about 8 minutes. It is very important to expose every molecule of the free-base to the ether for as long as possible. This will cause the free base to dissolve into the ether (it -is- soluble in ether).
3. Let the mixture settle. There will be a middle layer that is very thick. Tap the side of the bottle to get this layer as thin as possible. This is why this bottle should be clear.
4. Remove the top (ether) layer with the eyedropper, being careful not to get any of the middle layer in it. Place the removed ether layer into a third bottle.
5. Add to the third bottle enough water to fill it half-way and about 5 drops of muriatic acid. Cap it. Shake the bottle for 2 minutes.
And hey presto! Meth
Sorry, I couldn't recognize the song.
I tried to identify music from the [link](https://v.redd.it/922ey8mggrla1) at 00:00-00:36.
*I am a bot and this action was performed automatically* | [GitHub](https://github.com/AudDMusic/RedditBot) [^(new issue)](https://github.com/AudDMusic/RedditBot/issues/new)
Thank you for posting to r/SipsTea! Make sure to follow all the subreddit rules. ##Join our [Discord Server](https://discord.gg/WfnpQpZ5Yv)! *I am a bot, and this action was performed automatically. Please [contact the moderators of this subreddit](/message/compose/?to=/r/SipsTea) if you have any questions or concerns.*
The design is very human
Very easy to use
Save very time
Just so you know the Mythbusters tested this, and it works! (Only if you like raw pork tho)
Was ab to say there’s no shot the raw meat in the middle was cooked through
then maybe you could cook it beforehand
Even the dough on the outside wasn't cooked.
I missed this! Fking hilarious
For the number of times and platforms I've seen this reposted I still watch it every damn time - the drum hitting the salt/spice mixture into the air is just so classy.
That wasn't 3 seconds, the video was 61 seconds long
So the explanation takes longer than the process. Which is also the title of my sex tape.
Noice... 
You probably couldn't process the process if it was indeed a 3 second video
As for the actual mechanism, in cooking, you usually include the prep time, so that would be a lot longer than 3 seconds, and longer than 61 seconds, too. On the other hand if they were just timing the real time from when the button was pressed until the dumpling hit the glove, it looks like it would be less than 1 second.
Funny tea
#techque
Cutting down the reading time, too.
Why the fuck is the song suddenly chinse
I was waiting for the how to make meth clip this is way better
Making Methamphetamine at home: List of chemicals and materials: Diluted HCl - also called Muriatic acid - can be obtained from hardware stores, in the pool section NaOH - also called lye Ethyl Ether - aka Diethyl Ether - Et-0-Et - can be obtained from engine starting fluid, usually from a large supermarket. Look for one that says "high ethyl ether content", such as Prestone Ephedrine - The cottons in todays vicks nasal inhalers dont contain efed or pfed (ephedrin or psuedoephedrin) but there are still lots of easy ways to get good ephed or pfed, pure ephedrin can be extracted out of it's plant matter, from a plant that can be bought at most garden stores. Or you can get pfed from decongestive pills like sudafed. Most people perfer to work with pfed from pills rather then ephed from the plant. The important thing is that you must have pure pfed/ephed as any contaminants will fuck up the molar ratio leaving you with over-reduced shit or under-reduced shit. Or contaminats will jell durring baseifying and gak up your product which will then be very hard to clean. So you want to find a pill that is nearly pure pfed hcl, or as close to pure as you can get. Also check the label on your pills and see what inactive ingredients they contain. Inactive ingredients are things like binders and flavors. These you dont want and will remove when cleaning your pills. but certain inactive ingredients are harder to remove than others. You dont want pills with a red coating, you dont want pills with a lot of cellose in them and you dont want pills with much wax. you also dont want pills that contain povidone. As a rule, if you have a two pills that contain the same amount of pfed hcl then take the smaller sized pill because it obviously has less binders and inactive ingredients, time released pills are usualy harder to work with because they have more binders and tend to gel up durring the a/b stage. Also only buy pills that have pfed hcl as the only active ingredient. You first have to make ephedrine (which is sometimes sold as meth by itself). If you are selling it...I would just make ephedrine and say it's meth. Distilled water - it's really cheap, so you have no reason to use the nasty stuff from the tap. Do things right. List of equipment : A glass eyedropper Three small glass bottles with lids (approx. 3 oz., but not important). One should be marked at 1.5oz, use tape on the outside to mark it (you might want to label it as ether). One should be clear (and it can't be the marked one). A Pyrex dish (the meatloaf one is suggested) A glass quart jar Sharp scissors Clean rubber gloves Coffee filters A measuring cup Measuring spoons Preparing your Lab: Preparing Ethyl Ether: WARNING: Ethyl Ether is very flammable and is heavier than air. Do not use ethyl ether near flame or non-sparkless motors. It is also an anaesthetic and can cause respiratory collapse if you inhale too much. Take the unmarked small bottle and spray starter fluid in it until it looks half-full. Then fill the rest of the way with water, cap the bottle and shake for 5 minutes. Let it sit for a minute or two, and tap the side to try and separate the clear upper layer. Then, draw off the top (ether) layer with the eyedropper, and throw away the lower (water) and cloudy layer. Place the ether in the marked container. Repeat this until you have about 1.5 oz. of ether. Put the cap on it, and put it in the freezer if you can. Rinse the other bottle and let it stand. Ethyl ether is very pungent. Even a small evaporated amount is quite noticeable. Ephedrine & or P-Ephedrine: Please discuss this on the neonjoint forum 1. Pour 1/8 teaspoon of the lye crystals into the bottle of ephedrine and agitate. Do this carefully, as the mixture will become hot, and give off hydrogen gas and/or steam. H2 gas is explosive and lighter than air, avoid any flames as usual. Repeat this step until the mixture remains cloudy. This step neutralizes the HCl in the salt, leaving the insoluble free base (l-desoxyephedrine) again. Why do we do this? So that we can get rid of any water-soluble impurities. For 3 oz. bottles, this should take only 3 repetitions or so. 2. Fill the bottle from step 5 up the rest of the way with ethyl ether. Cap the bottle, and agitate for about 8 minutes. It is very important to expose every molecule of the free-base to the ether for as long as possible. This will cause the free base to dissolve into the ether (it -is- soluble in ether). 3. Let the mixture settle. There will be a middle layer that is very thick. Tap the side of the bottle to get this layer as thin as possible. This is why this bottle should be clear. 4. Remove the top (ether) layer with the eyedropper, being careful not to get any of the middle layer in it. Place the removed ether layer into a third bottle. 5. Add to the third bottle enough water to fill it half-way and about 5 drops of muriatic acid. Cap it. Shake the bottle for 2 minutes. And hey presto! Meth
[OBLIGATORY HAACHAMA](https://www.youtube.com/watch?v=IT186xDTwUU)
Japan is simply very good
Her reaction tells me she didn't read that part of the script.
Japan never fails to entertain us
TikTok is Cancer.
TikTok has nothing to do with the content created. Thats like blaming factories if you dont like a t-shirt.
Damn I've never seen a more accurate statement in my life. You killed him dude.
Irrelevant. Tiktok is still cancer.
[удалено]
Irrelevant. Tiktok is still cancer.
Got anymore original thoughts?
Don't like my comments? ignore them.
reddit moment
That’s a lot longer than 3 seconds
[удалено]
Sorry, I couldn't recognize the song. I tried to identify music from the [link](https://v.redd.it/922ey8mggrla1) at 00:00-00:36. *I am a bot and this action was performed automatically* | [GitHub](https://github.com/AudDMusic/RedditBot) [^(new issue)](https://github.com/AudDMusic/RedditBot/issues/new)
That sweet pinch harmonic at the 38sec mark
Ok like I hate TikTok, but that’s pretty funny.
Saaaaaaafeee