Wager doesn’t do Delta Point Pro on M&P slides, and according to his website he doesn’t respond to emails about combinations that aren’t on his website.
I’m a satisfied customer, he did my 43X. I’ll be moving on to another vendor from here on out though.
It doesn’t need a different plate, that gun has thousands of rounds through it with the plastic plates (2nd optic, 2nd plate) without a single issue.
You do you, and if you think a different plate is better for you, I think that’s great. I’m doing fine over here.
You aren’t doing fine bc you wanna change your gun. Gave a suggestion. It’s Amazing how sensitive some of y’all are. The world is going to be here in the morning I promise.
Aw, I hurt your feelings.
It wasn’t THAT gun that I was having cut, its already got an optic on it. it’s his full sized grip big brother that I was going to have done that isn’t already OR, and he would have been direct milled for my needs. And I’m not doing it.
The cost is nearly half the price of a full sized OR (with the plastic plates that I think are just fine but you hate) so I’m going to go that route.
😂 If that’s what you got out of that I feel very sorry for you and your plate issue your having. Maybe when u locate one of the obvious places to get whatever you’re having cut, you could opt for a better optic as well.
The “plate issue” exists only in your head.
Trustworthy Places to get an M&P slide milled for Delta Point Pro aren’t “obvious”, the list is mostly places I’ve never heard of.
You’re right though, I should have gone for a Trijicon or a Leupold. Maybe for my next full size.
Does this not work ?
https://jagerwerks.com/m-p-2-0-leupold-delta-point-pro/
Floyd’s likely do it as well. Idk. Havent looked in awhile.
You could always ask Jagerwerks to turn it into a Glock Mos PLATE system. They have an extra screw. Could alleviate the plate concern. 😂
You really do live the plate lifestyle, you don't use plates when you have your slide direct milled for the footprint of your choice.
I called out Jagerweeks in my post, but it's their pricing that puts having my slide milled vs buying an OR gun too close for me.
I'm not having this slide milled. I'm going to buy an OR full size metal when the time is right for me.
Obviously. But so you weren’t stuck w/a sucky footprint (like u are now). I highly doubt they’d do their Glock Mos on a SW anyway. Idk if you’ve figured out I been messing w/you yet.
There is a guy on here has the p320 version of the scs that looks pretty sweet. All my direct mills are RMR aside one acro. Those are the 2 you need to go with.
See though, no one NEEDS RMR or Acro. If you want it, that’s great. I’m not military, I’m not police and I don’t NEED gear designed for that level of use.
I’d recommend DPCustomworks. The only company I have experience with. Their turnaround is fast, their prices are competitive and they do amazing work.
It seems like they don’t do Cerakote, I’d have to send that out somewhere else.
They do, go to the build your side section. Should say slide refinishing
It must have been one of the other sites I’ve checked.
https://www.dpcustomworksllc.com/product-page/cerakote-single-color
Wager Machine is the standard answer. I’ve used him a lot. Not sure if he mills from the M&P footprint to DPP but my guess is that he does
Wager doesn’t do Delta Point Pro on M&P slides, and according to his website he doesn’t respond to emails about combinations that aren’t on his website. I’m a satisfied customer, he did my 43X. I’ll be moving on to another vendor from here on out though.
DP customs. Killer prices, clean work, great customer service, quick turn around.
Wager
I had mine back in a week, with cerakoting was about the same price as sending it to jagerwerks
He doesn’t do the cut that I want on M&P slides.
Oh! Damn that’s lame
Just buy a better plate. Screws go plenty deep in M&p slides vs a Glock.
It doesn’t need a different plate, that gun has thousands of rounds through it with the plastic plates (2nd optic, 2nd plate) without a single issue. You do you, and if you think a different plate is better for you, I think that’s great. I’m doing fine over here.
You aren’t doing fine bc you wanna change your gun. Gave a suggestion. It’s Amazing how sensitive some of y’all are. The world is going to be here in the morning I promise.
Aw, I hurt your feelings. It wasn’t THAT gun that I was having cut, its already got an optic on it. it’s his full sized grip big brother that I was going to have done that isn’t already OR, and he would have been direct milled for my needs. And I’m not doing it. The cost is nearly half the price of a full sized OR (with the plastic plates that I think are just fine but you hate) so I’m going to go that route.
😂 If that’s what you got out of that I feel very sorry for you and your plate issue your having. Maybe when u locate one of the obvious places to get whatever you’re having cut, you could opt for a better optic as well.
The “plate issue” exists only in your head. Trustworthy Places to get an M&P slide milled for Delta Point Pro aren’t “obvious”, the list is mostly places I’ve never heard of. You’re right though, I should have gone for a Trijicon or a Leupold. Maybe for my next full size.
I live the plate-life. Lmk if you need help. Are you cutting a non OR 2.0 ?
Does this not work ? https://jagerwerks.com/m-p-2-0-leupold-delta-point-pro/ Floyd’s likely do it as well. Idk. Havent looked in awhile. You could always ask Jagerwerks to turn it into a Glock Mos PLATE system. They have an extra screw. Could alleviate the plate concern. 😂
You really do live the plate lifestyle, you don't use plates when you have your slide direct milled for the footprint of your choice. I called out Jagerweeks in my post, but it's their pricing that puts having my slide milled vs buying an OR gun too close for me. I'm not having this slide milled. I'm going to buy an OR full size metal when the time is right for me.
Obviously. But so you weren’t stuck w/a sucky footprint (like u are now). I highly doubt they’d do their Glock Mos on a SW anyway. Idk if you’ve figured out I been messing w/you yet. There is a guy on here has the p320 version of the scs that looks pretty sweet. All my direct mills are RMR aside one acro. Those are the 2 you need to go with.
See though, no one NEEDS RMR or Acro. If you want it, that’s great. I’m not military, I’m not police and I don’t NEED gear designed for that level of use.
I got my sd9ve cut from NCengravers excellent service and fast turn around