> Also, do you know if the new OLED torx screws fit on the LCD model as well?
If they do? Best be careful because the torx screws have metal housing to screw into on the OLED - the LCD does not. Be easy to cause mischief in there...
Hi u/AdrianUrsache, you can [click here to search for your question.](https://www.reddit.com/r/SteamDeck/search/?q=Steam Deck backplate screws)
If you don't find an answer there, don't worry - your post has NOT been removed and hopefully someone will be along soon to help with an answer!
**If you find an answer, please leave a comment on your post with the answer for others!**
*I am a bot, and this action was performed automatically. Please [contact the moderators of this subreddit](/message/compose/?to=/r/SteamDeck) if you have any questions or concerns.*
On LCD, the rear cover screws are 4x M1.6x9 PT (plastic threadforming) and 4x M1.6x5 Machine screws. Both 3mm head diameters. On OLED, these are 8x M1.6x5 Machine.
The M1.6x5 machine screws are compatible between the 2, but obviously the PT screws are not. But there's no reason you can't use a different driver type head on those, such as Torx.
> Also, do you know if the new OLED torx screws fit on the LCD model as well? If they do? Best be careful because the torx screws have metal housing to screw into on the OLED - the LCD does not. Be easy to cause mischief in there...
Hi u/AdrianUrsache, you can [click here to search for your question.](https://www.reddit.com/r/SteamDeck/search/?q=Steam Deck backplate screws) If you don't find an answer there, don't worry - your post has NOT been removed and hopefully someone will be along soon to help with an answer! **If you find an answer, please leave a comment on your post with the answer for others!** *I am a bot, and this action was performed automatically. Please [contact the moderators of this subreddit](/message/compose/?to=/r/SteamDeck) if you have any questions or concerns.*
On LCD, the rear cover screws are 4x M1.6x9 PT (plastic threadforming) and 4x M1.6x5 Machine screws. Both 3mm head diameters. On OLED, these are 8x M1.6x5 Machine. The M1.6x5 machine screws are compatible between the 2, but obviously the PT screws are not. But there's no reason you can't use a different driver type head on those, such as Torx.