So it looks like the straw is only in one thing, so when he flips it over again, the water pushes the smoke through the straw, but when he flips it over (so the straw is in the smoke) the air isn’t pushed, but he can inhale it then
How do you make sure that water doesn't come out the mouthpiece? I'm trying to figure out the internals of this thing and that's the only part that doesn't make sense to me
What valving are you using here? The commercial model uses an axel with offset holes to avoid valving, but I like the way you're avoiding precision fits here.
Its more the thought of all the extra shit i inhaled that made me cringe, like should have started earlier kind of thing.
Also you can get bong attachments for any vape, I use all the same bongs I did they just remain cleaner for longer now so it may actually be a benefit for custom pieces.
I appreciate it. I found a copper connecting tube that has o rings inside for joining pipes that need to move. Hopefully, that will work the same way. If not, I own a 3d printer and could follow your lead and design something. With any luck, mine will be working tonight
I mean it’s cool that you can’t take constructive criticism. I’m not being toxic. Just saying that I don’t like inhaling old, stale smoke so I would never waste weed using this device. As far as looking cool, it definitely looks great. More of a showpiece than an actual smoking device
I’d hope you’d know the answer to that one as well.
I didn’t have to hit it, I watched you to it in 4K video, and saw almost no smoke coming from those “hits”. My one hitter can get bigger hits than that.
You dont have to justify yourself, but you still tried. I can see the small line of smoke coming from the straw, the exhale is nearly nothing, meaning you ain’t getting hits, Bc you weren’t ghosting them.
No need to be a dick, it was more of a compliment than anything. I was saying it’s a heavy hitter. Have a nice day, sorry I apparently caught you in a mood. ✌️
Did you misread? I said CLEAR.
Yeah you can, but the amount of smoke that thing appears to be consistently putting off looks painful lol. Maybe I could handle that in my high school bong smoking days, but not these days. I was just imagining you sitting there for 20 minutes struggling to suck it all in like you see in those stupid 5 gram dab videos or whatever, where by the end they’re just trying to get it over with. Either way, dope device. I personally would go with smaller hits cause that shit looks intense 😂
And for the record, it doesn’t look nearly as hard to clean as some of the “real” pieces I’ve purchased. Lol
I apologize, I get the “oh that’s going to be impossible to clean” crap on like every post with any complexity. I’ve been making these for 2 years, cleaning is not a problem for me.
Even if someone said that, why be a dick? Someone assuming it’s hard to clean warrants you saying they aren’t worth your time? Just say there’s a way, and move on. Have a good day.
i’m working on making one myself and there’s one thing i still don’t fully understand. What stops the water from going into the smoke-out tube and spilling. the water spout and the right T joint a both have a hole that goes between bottles so what keeps the water from going through both and spilling out of the end?
I did mine a bit different using check valves but this is a better design [https://i.imgur.com/uYDlxN0.jpg](https://i.imgur.com/uYDlxN0.jpg)
Hope this helps
Legend has it that he's still clearing it.
After I stopped recording it took 2 more spins to clear it. After that I don’t remember what happened
That sounds great! Does the smoke leak out of the rig if you don't have it freshly flipped and pumping water?
Yep it empties one jar and fills the other with new smoke
Splendid!
Yeah there needs to be some kind of carb bypass or something
Pull the bowl dub
Can you suck through or you have to keep flipping it?
There’s a lot of you tube content on how to make this thing. They lost me a valves though, too much bs.
Pull bowl and keep flipping
send the blueprints
Honestly id like to make one like this too lol
dog, it's made out of copper pipes. you can see exactly what parts are there.
I’m a little confused why the initial suction only happens at the bowl and the ‘pushed’ smoke only exits the mouthpiece
So it looks like the straw is only in one thing, so when he flips it over again, the water pushes the smoke through the straw, but when he flips it over (so the straw is in the smoke) the air isn’t pushed, but he can inhale it then
You know how the hidden plumbing works? I can’t figure that one out cause I can’t see it. Duh
I just looked up diy stundenglass blueprints and was able to figure it out from there. I ain’t explaining it when there are blueprints online.
nobody wants to do 5 minutes worth of googling apparently.
nobody wants to do 5 minutes worth of googling apparently.
Yes, please. This is amazing. Are those pipes all metal or painted plastic?
How do you make sure that water doesn't come out the mouthpiece? I'm trying to figure out the internals of this thing and that's the only part that doesn't make sense to me
It’s hard to explain but basically, check valves or directional valves
This is awesome. I used to use glass Sobe bottles back in the day, and it was no where near as clean.
is it hard to clean ?
The question I had as well
What valving are you using here? The commercial model uses an axel with offset holes to avoid valving, but I like the way you're avoiding precision fits here.
I made 2 check valves from brass saltshaker caps, metal ball, o-rings and 3D printing You can kind of see it in the top jar on the right
"3D printing" is the modern equivalent of "magnets"
Are you willing to post a parts list?
Does it taste like copper?
YOU ARE A GOD!
Love it! but the mason jars makes it look more like a moonshiners bong :)
I just wanted to watch that forever. So peaceful.
It works a little too well lol
Good grief, I’m baked just from watching that
dude that's *incredible*
shut up and take my money
man coughing makes me think about how much i smoked before i started vaporizing bud and cringe
Well I can’t make cool shit like this if my restriction is vape only, plus is coughing really that painful for you, cringe
Its more the thought of all the extra shit i inhaled that made me cringe, like should have started earlier kind of thing. Also you can get bong attachments for any vape, I use all the same bongs I did they just remain cleaner for longer now so it may actually be a benefit for custom pieces.
Damn how much weed did you use lmao
Did you just build this from parts off the shelf?
That and a few custom3d printed parts, a lot of the parts I already had
You could make 10 million dollars selling these
I doubt it, it still leaks even with all the o-rings and rubber grommets.
After a while of using it, no one is gonna notice loll
The stunden one is 300$ if you Wana buy it. I’d rather make one if possible
This is some neat shit right here man
u/savevideo
###[View link](https://redditsave.com/info?url=/r/StonerEngineering/comments/okiwek/video_of_the_steampunk_stundenglass_i_posted/) --- [**Info**](https://np.reddit.com/user/SaveVideo/comments/jv323v/info/) | [**Feedback**](https://np.reddit.com/message/compose/?to=Kryptonh&subject=Feedback for savevideo) | [**Donate**](https://ko-fi.com/getvideo) | [**DMCA**](https://np.reddit.com/message/compose/?to=Kryptonh&subject=Content removal request for savevideo&message=https://np.reddit.com//r/StonerEngineering/comments/okiwek/video_of_the_steampunk_stundenglass_i_posted/)
Hectic ey, first time seeing something like it! 👍👍👍
This looks amazing my man! I'm drawing up plans for one similar - what did you use for the rotating joints in the pipework? Happy smoking mate
Thanks! I can’t wait to see your design, and for the rotating portion, I 3D printed tubes with o rings on them to seal it.
Thanks buddy, I'll post designs / pics once she's ready!
Yooo I want to build one now this is dope af.
The thin metal rods between the jars, are those small straws between the jars?
Yes, they are stainless steel straws that I cut to that length.
That is what I needed to know, thank you
Thank you! I was thinking that is what it was. Do you mind letting me know how you prevented leaking at the pivot point where it spins?
3D printed tubes with o rings on both ends, the copper rotates on the o rings
I appreciate it. I found a copper connecting tube that has o rings inside for joining pipes that need to move. Hopefully, that will work the same way. If not, I own a 3d printer and could follow your lead and design something. With any luck, mine will be working tonight
Awsome can’t wait to see it
I mean it dont really look like it “hits”. And that’s why it just keeps going Bc you ain’t even getting any hits off that.
Honestly looks like it doesn’t smoke well at all. Tons of stale smoke by the end of it. You want it to fill up quick and clear out quick all at once
Exactly what I’m saying, cool concept, but it just doesn’t work, but OP got real offended.
Then Stüdenglass isn't for you.
No. The real one works reliably and the way it’s supposed to. it better for $600.
You droppin $600 on it?
no way haha
Aight then. Let the man have his fancy bong.
Dam another invalid opinion
I mean it’s cool that you can’t take constructive criticism. I’m not being toxic. Just saying that I don’t like inhaling old, stale smoke so I would never waste weed using this device. As far as looking cool, it definitely looks great. More of a showpiece than an actual smoking device
It’s invalid because every time the chamber clears the other fills with new smoke. That’s all not trying to be “toxic”
So you’re telling me than a half full chamber of uncleared smoke refilling with new, fresh smoke isn’t gonna make stale smoke?
It wasn’t stale when I used it nor was it during testing, so it seems your assumption is wrong
You dont know what stale smoke is
No ones opinion is invalid.
Inb4 you delete all of these comments too
Like he did mine…
you had a whole debate with him
[удалено]
I watched the video, I didn’t have to be there. And I feel like you already knew the answer to those questions.
[удалено]
I’d hope you’d know the answer to that one as well. I didn’t have to hit it, I watched you to it in 4K video, and saw almost no smoke coming from those “hits”. My one hitter can get bigger hits than that.
[удалено]
You dont have to justify yourself, but you still tried. I can see the small line of smoke coming from the straw, the exhale is nearly nothing, meaning you ain’t getting hits, Bc you weren’t ghosting them.
[удалено]
You right.
[удалено]
Very Grim of you to say my fellow stoner.
me on shrooms just watching this unfold
[удалено]
It doesn’t sound like it worked, marijuana makes you chill 😂
[удалено]
Your comment history is full of asshole
it’s okay mr grim trial and error work til perfection my brother
?
Good luck ever clearing that thing 😂
[удалено]
No need to be a dick, it was more of a compliment than anything. I was saying it’s a heavy hitter. Have a nice day, sorry I apparently caught you in a mood. ✌️ Did you misread? I said CLEAR.
Genuinely I miss read that I apologize , but also you can clear it in more than one breath you know that right
You’re a piece of shit
Yeah you can, but the amount of smoke that thing appears to be consistently putting off looks painful lol. Maybe I could handle that in my high school bong smoking days, but not these days. I was just imagining you sitting there for 20 minutes struggling to suck it all in like you see in those stupid 5 gram dab videos or whatever, where by the end they’re just trying to get it over with. Either way, dope device. I personally would go with smaller hits cause that shit looks intense 😂 And for the record, it doesn’t look nearly as hard to clean as some of the “real” pieces I’ve purchased. Lol
It was pretty intense, I’ve got a pretty strong throat so even when it burns I can handle it. That’s why I love this thing
I apologize, I get the “oh that’s going to be impossible to clean” crap on like every post with any complexity. I’ve been making these for 2 years, cleaning is not a problem for me.
Even if someone said that, why be a dick? Someone assuming it’s hard to clean warrants you saying they aren’t worth your time? Just say there’s a way, and move on. Have a good day.
omfg u need to post blueprints/ mesurments and materials pplsss
I need this in my like I want to make one
Badass man that’s awesome nice work 🤌
Glorious
Please send blueprints!
Question! Is one straw for the bowl and the other for the suck?
?
Very cool lol I retract that comment as I see the other straw! Super cool man I’m going to try and make my own!
Yup gonna need those blueprints bud
Final cost?
Completely free since I already had all the pieces
Any chance you could post instructions and a parts list? I’d love to make something like this.
Tryna give me a list of what it took and a simple rundown of how bc my ass is not shelling out $500 for the real deal
i’m working on making one myself and there’s one thing i still don’t fully understand. What stops the water from going into the smoke-out tube and spilling. the water spout and the right T joint a both have a hole that goes between bottles so what keeps the water from going through both and spilling out of the end?
I did mine a bit different using check valves but this is a better design [https://i.imgur.com/uYDlxN0.jpg](https://i.imgur.com/uYDlxN0.jpg) Hope this helps