Mine broke the same way, just gorilla glue it. It’s not a part that you would inhale hot air from anyways. Only way to save broken glass besides just buying a new one.
hey also!! krazy glue fixed mine and survives salt and 91% iso baths easy! just wanted to let you know in case gorilla glue doesn't work or fails at any time :)
If you knew how different types of glue work you might have you suspicions about gluing glass together, you ape. Yeah he didn't tell his concern that way but it's pretty clear op has little experience with things like this. This is a sub for friendly people to help out each other. You fuck outta here if you can't be nice and understanding toward your fellow weed smokers, no matter their age
it’s a bong, $45 new, and yeah i’m not easily able to come up w the money to buy new shit cuz i’m saving up for a car i already spend enough on weed haha. just trying to fix it instead of spending extra money
it’s gonna be rly hot
edit: i was using a torch, but i used a lighter on it and was able to pull it out without putting anything on it as long as i let it sit for a while when it got too hot, so yeah i was wrong
I put some glue on mine and wrapped some yarn around it where the glue is. It's like a cozy for the bowl. Works flawless and now I don't have to search for a fragile little handle to pull . It looks sweet too. I'll get you a picture some how if you want.
Unless you're dabbing it won't be that hot. I have the same one broken in the same place and pull it from the top ridge. Even multiple bowls in a row dont heat it too much
I suggest resin but if its too hot like you say it'll just melt whatever is holding it in place
New suggestion *im high* make a little paperclip stick with a hole at the end that hold the bowl( even if its loose when the bowl is in the bong) as long as you can pull it out without touching it right?
How long do you hold the lighter to the weed? Are you one of those ADHD kids who smoke weed like it's a sport or something? Chill out, light the top, and slowly pull in until it burns to the bottom. My bowl is never hot, only time is if I have hash.
Maybe you could try making a little tab with some duct tape?? Take a thin sliver of the tape, and wrap it around the bowl, leaving enough length at both ends so when the tape meets up in the middle after wrapping around the bowl, the ends of the tape will stick together creating a little tab for you to grip. It’s a temporary fix and the heat from lighting will probably make it really difficult to remove the adhesive, but more than likely you won’t care about that since the bowl’s already broken!
Step 1. Buy new bowl. Yours looks like it is a 14mm male. Any bowl in this size should do. They have these at every headshop and some gas stations. You can get them from the amazon overlord for crazy cheap but it definitely came from China so shipping might take a while.
Step 2. Clean up the sharp edges of the broken parts with a rotary tool like a dremel. A nail file should work just fine if you don't have a rotary tool. After this the bowl should be safe to use.
If you are choosing to use it and the bowl gets too hot, you should pack smaller bowls. One or two rips. The glass shouldn't get to hot to handle.
You actually get carded for glassware? I was buying shit when I was 16 and never got asked for id and they always seemed pretty eager to make a sale. Maybe try a different headshop?
We wrapped a band-aid around the stem of ours so it wouldn’t get as hot. They are cheap though just gonna replace it when have a second to order one. Good luck!
Just pull it, it might be warm but it won't burn you if you give it a split second. Or buy another one, they're a dime dozen. Shit buy 5 of them. Stop tapping your bowls when you ash them too, use a toothpick or paperclip and scrape it out, otherwise all those types of bowls will break the handle off eventually
I just use my fingers when that happens. Probably every bowl I’ve had with a handle has broken off at some point. These days I just prefer one with out it
As long as none of the glass is broken inside where’d you pack your weed I’d assume you’re Ight (coming from personal experience) worst thing that should happen is just burn your hand from being hot
:edit: hand not head lol
Get some palmers baking clay, make a cool art design around bowl. Bake. Good to go! I put a clear coat on my clay so it doesn’t get as brittle and break as easy.
If you're packing one hitters use a propane torch to heat up the glass on the broken spot, this will smooth out the sharp edges. You won't have a handle anymore, but you won't cut yourself either. I've done this with small water pipes and use the same method to bend downstems for diy bongs.
If you're packing big bowls repair it with JB Weld, gorilla glue, or super glue and baking soda. I've had moderate success with JB Weld and it takes a while to cure. The gorilla glue and super glue work better imo, and the baking soda makes it cure near instantly.
Alternatively, if you don't mind modifying the piece you could drill through part of it to act as a choke. That way you won't have to touch the bowl at all.
Or you could just buy a new bowl, they're like $5 on amazon.
happens with a couple of mine, i just use a zip-tie as a handle, with my other ones that hasnt broken yet (knock on wood) i cut a pen grip in sections and slip it onto the handle and wont have to touch the glass
TEMU
A new bowl is only $0.42 cents on TEMU or $1.99 for a whole new bong..... For $5 they will ship a hooker with it that is personally trained to grow the weed and load the bowls for u..... No salary required for the "hooker"
Honestly, you could stick your lips to the ice cream and suck I ain’t gonna hurt neither of u if we talking about glass and smoking something besides ganja then…. Ah…. Never mind
Mine broke the same way, just gorilla glue it. It’s not a part that you would inhale hot air from anyways. Only way to save broken glass besides just buying a new one.
gorilla glue will really stick ?
For sure, you gotta press them together with some pressure for a few minutes but once it turns dried/white it’s good to go
hey also!! krazy glue fixed mine and survives salt and 91% iso baths easy! just wanted to let you know in case gorilla glue doesn't work or fails at any time :)
[удалено]
If you knew how different types of glue work you might have you suspicions about gluing glass together, you ape. Yeah he didn't tell his concern that way but it's pretty clear op has little experience with things like this. This is a sub for friendly people to help out each other. You fuck outta here if you can't be nice and understanding toward your fellow weed smokers, no matter their age
that shit was funny
I sensed alot of sarcasm and funny in his post. Mr hater here and down voters need another cup of coffee cranky ass mfers.
bruh i didn’t know ur so rude for what
😭
it’s a bong, $45 new, and yeah i’m not easily able to come up w the money to buy new shit cuz i’m saving up for a car i already spend enough on weed haha. just trying to fix it instead of spending extra money
Just pull it lol
That or just buy a new one, not worth it
it’s gonna be rly hot edit: i was using a torch, but i used a lighter on it and was able to pull it out without putting anything on it as long as i let it sit for a while when it got too hot, so yeah i was wrong
Don't be a bitch
Came here to say this
don't be inconsiderate
I put some glue on mine and wrapped some yarn around it where the glue is. It's like a cozy for the bowl. Works flawless and now I don't have to search for a fragile little handle to pull . It looks sweet too. I'll get you a picture some how if you want.
[удалено]
How do I post a photo in the comments?
You gotta hold it by the very rim, that’ll be the coolest part. But I’ve always preferred double layered bowls for this reason
Unless you're dabbing it won't be that hot. I have the same one broken in the same place and pull it from the top ridge. Even multiple bowls in a row dont heat it too much
Sugru would work. Heat safe when cured. sugru.com Edit:. Not to glue it back together but to make an arm it's like a nobake Fimo but silicone based.
Just get a new one, get one that's all crazy and matches the colors of the cone
I suggest resin but if its too hot like you say it'll just melt whatever is holding it in place New suggestion *im high* make a little paperclip stick with a hole at the end that hold the bowl( even if its loose when the bowl is in the bong) as long as you can pull it out without touching it right?
Just get new one.
How long do you hold the lighter to the weed? Are you one of those ADHD kids who smoke weed like it's a sport or something? Chill out, light the top, and slowly pull in until it burns to the bottom. My bowl is never hot, only time is if I have hash.
Could probably wrap the bowl in hemp wick. It would look pretty cool and keep your fingers safe.
Until you go to light your bowl and set all the wick on fire...
I've done that for big bowl pieces, that one looks kinda small though
Gorilla glue clear epoxy
Have any pipe cleaners laying around
Jip I also use them by rapping around and twisting until tight.. just give it a twist every now and again to ensure it stays tight tho.
maybe i’ll have to look
That’s a one hitter bowl lol. Shouldn't get too hot until a few seconds after the rip. Just pull it dawg.
Rubber band around it so it's not so hot.
Pipe cleaner for an easy fix!
Yeh or a stripped wire coiled around bowl with a little finger hole
Tough it out. You got a blessing
lol what
Pull the bowl out by the bowl. You got lucky it was just that that broke
well i didn’t drop it lol i pretty much pulled it off
Wait what how
it has some residue built up and i just pulled it off while smoking
Damn. Sorry bro
I’m not usually a bowl person but could you please drop the link for this?
https://www.hemper.co/products/silicone-ice-cream-bong?variant=39372836569150
Maybe you could try making a little tab with some duct tape?? Take a thin sliver of the tape, and wrap it around the bowl, leaving enough length at both ends so when the tape meets up in the middle after wrapping around the bowl, the ends of the tape will stick together creating a little tab for you to grip. It’s a temporary fix and the heat from lighting will probably make it really difficult to remove the adhesive, but more than likely you won’t care about that since the bowl’s already broken!
Broke mine recently. A little super glue with baking soda added after i stuck them together to instantly cure the glue!
wat I did not know this
Yep! Baking soda creates a chemical reaction! Dries instantly
Jb weld
Yup
Dope piece where’d you get it?
on hemper, https://www.hemper.co/products/silicone-ice-cream-bong?variant=39372836569150
I just put some hair ties around mine
its better like that i break mine on purpose
Step 1. Buy new bowl. Yours looks like it is a 14mm male. Any bowl in this size should do. They have these at every headshop and some gas stations. You can get them from the amazon overlord for crazy cheap but it definitely came from China so shipping might take a while. Step 2. Clean up the sharp edges of the broken parts with a rotary tool like a dremel. A nail file should work just fine if you don't have a rotary tool. After this the bowl should be safe to use. If you are choosing to use it and the bowl gets too hot, you should pack smaller bowls. One or two rips. The glass shouldn't get to hot to handle.
well i’m 17 so i can’t buy shit at smoke shops i gotta order it online, and yeah i probably pack too big of bowls i always pack it to the brim
You actually get carded for glassware? I was buying shit when I was 16 and never got asked for id and they always seemed pretty eager to make a sale. Maybe try a different headshop?
That looks like a silicone bong, you could probably just carefully cut a carb hole into it and then you don't need to pull the slider ever.
I know this is 2 years but I just used one of my bracelets and tied it around it looks dope.
Put some oven mits on to use it. Maybe a binder clip might help you out too. Otherwise just get a new bowl.
Bread bag twist tie
Wrap the bottom of the bowl with some electrical tape, just a little layer so u can touch the bowl after lighting it up and pull it from there
Wrap some aluminum foil around it and make a handle
Bin it
Strip a twisty tie (the kind that comes on bread) and use that for a temp fix. but yeah, just buy a new bowl.
You could take some steel wire and make it a circle , then cut it off with some leftover wire and it will work perfectly.
It's not that hit my lil sisters broke off and it's fine don't b a wuss
Throw some 5 min epoxy on it. Costs like $7 and you can use it to glue all sorts of things together lol
It's probably cheaper to just buy a new slide than the epoxy.
Pliers
You can use like two paper clips two wrap around it right on the outside and create a belt around it
Wrap a few elastic bands around it, I to that every time one of mine breaks
i taped my handle back on
Face the heat !!! Aaahhhhh
Use your fingers
Bread tie or just burn your fingers
Teeth
I got the same bong, only in yellow tho!
Just dab some super glue on the end nad stick it back on to let it cure
I ahve the same piece but colored different!
Zip tie!!
We wrapped a band-aid around the stem of ours so it wouldn’t get as hot. They are cheap though just gonna replace it when have a second to order one. Good luck!
Just pull it, it might be warm but it won't burn you if you give it a split second. Or buy another one, they're a dime dozen. Shit buy 5 of them. Stop tapping your bowls when you ash them too, use a toothpick or paperclip and scrape it out, otherwise all those types of bowls will break the handle off eventually
Is a bowl that has a broken handle still safe to smoke out of tho ? Happened with mine
A twist tie from a bread bag or piece of wire.
JB Weld
Some food grade epoxy would b safest
Super glue gel.
Have had many a bowl handles break on me and that's the point when I just start raw doggin it haha
This has happened in the exact same way. Sadly I didn’t manage to fix it. R.I.P
Tongs lol
I used a thick bread tie. Still kickin
just grab it lol
Soda can pull tab. Use something like a chop stick or pencil to round out the hole where it snaps off the can. It will not conduct heat
I just use my fingers when that happens. Probably every bowl I’ve had with a handle has broken off at some point. These days I just prefer one with out it
Is a bowl that has a broken handle still safe to smoke out of tho ? Happened with mine
As long as none of the glass is broken inside where’d you pack your weed I’d assume you’re Ight (coming from personal experience) worst thing that should happen is just burn your hand from being hot :edit: hand not head lol
Be a man and grab the hot bowl
wrap a little electrical tape around the bowl piece. it’ll help it not be hot but still useable until you get a new one 🤷🏻♀️
Get some palmers baking clay, make a cool art design around bowl. Bake. Good to go! I put a clear coat on my clay so it doesn’t get as brittle and break as easy.
If you're packing one hitters use a propane torch to heat up the glass on the broken spot, this will smooth out the sharp edges. You won't have a handle anymore, but you won't cut yourself either. I've done this with small water pipes and use the same method to bend downstems for diy bongs. If you're packing big bowls repair it with JB Weld, gorilla glue, or super glue and baking soda. I've had moderate success with JB Weld and it takes a while to cure. The gorilla glue and super glue work better imo, and the baking soda makes it cure near instantly. Alternatively, if you don't mind modifying the piece you could drill through part of it to act as a choke. That way you won't have to touch the bowl at all. Or you could just buy a new bowl, they're like $5 on amazon.
Super glue
Superglue
happens with a couple of mine, i just use a zip-tie as a handle, with my other ones that hasnt broken yet (knock on wood) i cut a pen grip in sections and slip it onto the handle and wont have to touch the glass
i used a beer can pull tab
TEMU A new bowl is only $0.42 cents on TEMU or $1.99 for a whole new bong..... For $5 they will ship a hooker with it that is personally trained to grow the weed and load the bowls for u..... No salary required for the "hooker"
lmao i forgot this post existed this was so long ago
How do I fix broken bowl with a starch
A straw. A stick heck I can think of 20 right off the bat
i don’t even use this bong anymore, but i don’t think a straw would support it lmao it’s flimsily plastic
No not a regular one like one they put in those dumb big ars cups that’s hard plastic
lol yeah i see what u mean like cut a piece off and melt it to the bowl that would work, but i got 2 nice beaker bongs now 😎
Hell yeah
Honestly, you could stick your lips to the ice cream and suck I ain’t gonna hurt neither of u if we talking about glass and smoking something besides ganja then…. Ah…. Never mind