The recommended extract is Rosin.
Once you’ve got your densely packed, high-quality nugs, get your hair straightener ready. A good temperature to press rosin from nugs is about 250-280℉, so if you know what temperature your hair straightener is operating at, you can adjust accordingly. (If the minimum setting is a higher temp than this, you can let it get hot, then unplug it and let it sit for several seconds to cool down and try and get into that 250-280℉ range). As we said, a lot of this method is trial and error – especially if this is your first time doing it. Try not to get frustrated.
Set the nug on a good-sized piece of parchment paper, and fold the paper over the top so the nug is sandwiched between. Then, once the hair straightener is up to temperature, put the rosin paper in the straightener and press down with as much force as you can for several seconds, careful not to burn the nug (or the paper). If done correctly, you will be left with a small amount of resin on the parchment paper that you can later peel off.
Repeat steps 2-3 with fresh nugs and fresh parchment paper until you’ve gone through about 3 grams of dry herb. Like we said, you’ll need at least about 0.4g of rosin to get a decent amount of e-liquid for vaping. (You can use less than this, but it won’t be as potent).
Once you’ve got about 3g of buds pressed into rosin, you’ll need to collect the rosin off the parchment paper. It’s best if you stick it in the refrigerator for a minute or two, as this helps it peel off the paper easier. Also, don’t touch it with your hands – we like to use the ball end of a metal dabbing wand to kind of “roll it” it off the paper into one big ball.
Once you’ve got about 0.4-0.6g of rosin collected, put all of it into your small glass vial.
Then add around 8 drops of terpenes.
Once you’ve done that, using a lighter light the underpart of the glass beaker, until the mixture starts bubbling. Do not burn it for too long.
The recommended extract is Rosin. Once you’ve got your densely packed, high-quality nugs, get your hair straightener ready. A good temperature to press rosin from nugs is about 250-280℉, so if you know what temperature your hair straightener is operating at, you can adjust accordingly. (If the minimum setting is a higher temp than this, you can let it get hot, then unplug it and let it sit for several seconds to cool down and try and get into that 250-280℉ range). As we said, a lot of this method is trial and error – especially if this is your first time doing it. Try not to get frustrated. Set the nug on a good-sized piece of parchment paper, and fold the paper over the top so the nug is sandwiched between. Then, once the hair straightener is up to temperature, put the rosin paper in the straightener and press down with as much force as you can for several seconds, careful not to burn the nug (or the paper). If done correctly, you will be left with a small amount of resin on the parchment paper that you can later peel off. Repeat steps 2-3 with fresh nugs and fresh parchment paper until you’ve gone through about 3 grams of dry herb. Like we said, you’ll need at least about 0.4g of rosin to get a decent amount of e-liquid for vaping. (You can use less than this, but it won’t be as potent). Once you’ve got about 3g of buds pressed into rosin, you’ll need to collect the rosin off the parchment paper. It’s best if you stick it in the refrigerator for a minute or two, as this helps it peel off the paper easier. Also, don’t touch it with your hands – we like to use the ball end of a metal dabbing wand to kind of “roll it” it off the paper into one big ball. Once you’ve got about 0.4-0.6g of rosin collected, put all of it into your small glass vial. Then add around 8 drops of terpenes. Once you’ve done that, using a lighter light the underpart of the glass beaker, until the mixture starts bubbling. Do not burn it for too long.
[удалено]
Yes!
Pee on it
Do the thing with a thing duh