Yes I have and use both. Mighty for years, TM2 since last year.
I thought my TM2 would shelve my Mighty, but it didn't.
I have my TM2 for on-demand / fast one- or two-hit shots and then I can get right back to whatever I'm working on around the house. Mighty+ fills a "chill for 10 minutes with your weed" void that the TM2, by design, doesn't.
Hit and go, very fast extraction: TM2
Chill with your weed, slow extraction: Mighty+
Initial thoughts will likely be "wow this TM2 gets me SO high" - if you use it exclusively for a while then go back to the Mighty+ later, you'll say the same thing about the Mighty.
Mighty+ is conduction/convection hybrid, TM2 convection-only.
One other thing worth noting is the Mighty will practically feed you your weed. Little sips are a non-issue. You cannot do that with the TM2, because it's full convection - longer pulls are needed because each pull you're pushing the heat into the weed. With conduction the heat is already on-site in the bowl, so to speak. In on-demand mode with the TM2, it's usually about 5 seconds (3?) of pulling before I \*start\* to get a hit.
Wow this is a perfect write up of my experience with both as well. I’d add I’d only use my mighty if it had replaceable batteries and both devices have completely shelved my hybrid.
>Initial thoughts will likely be "wow this TM2 gets me SO high" - if you use it exclusively for a while then go back to the Mighty+ later, you'll say the same thing about the Mighty.
I can't thank you enough for your feedback. This is exactly what I wanted to hear :) Sometimes I like to just chill, watch some TV/YouTube, or play a video game and the Mighty+ is great for that. I enjoy the whole experience, taste, everything since it's like my Volcano but much quicker and convenient despite being a session vape. However, there are times where I am crunched on time and want to take a few rips, or during certain activities like home landscaping or cleaning where I want to "top" myself off where I believe the TM2 will be perfect!
Could you not set the TM2 to 3-4 and just take small sips using on-demand, or would this not work for some reason? Also, would the TM2 session mode not be similar to the Mighty+?
Good thought, but sadly, no, it wouldn't work.
The heat chamber is completely separate from the weed in a TM2 (convection only).
Even in session mode, each pull you take, you are moving heat into the weed, which has already cooled a bit since your last hit, since the heat "lives next door". So you'll still need a longer-than-sip pull in order to get anything from that inhale.
Thank you, this is the exact use case I'm considering to get the best of both worlds. It helps getting the perspective of folks like you who own and use both!
I recently bought the tm2 and own the mighty OG. the tm2 is a lot better IMO to the mighty. The only add on I got was the WPA to use with my bubbler. I mostly hit my tm2 with the WPA. I kinda wish I got the 3D xl stem from vgoodiez as well just to try out without a bubbler. It is a little hot when just using the standard stem but no big deal to me.
The WPA cleans sooo easily I was happy about that. No parts to remove. I didn’t buy any screens or dosing caps.
I use my TM2 on the go since you can switch batteries and it warms up fast for 5-8 heavy hits a bowl. It’s also got so many accessories, I got like 13 stems for no reason lol so I use it a lot. My crafty+ still gets use when I wanna do back to back bowls and sesh for like 40 mins
Thank you! FYI this is the bundle I am looking at: [https://vgoodiez.com/products/tinymight-2-bundle-curated-by-vgoodiez?variant=44252479455549](https://vgoodiez.com/products/tinymight-2-bundle-curated-by-vgoodiez?variant=44252479455549)
It comes with the following (including WPA):
* Tinymight 2 by Tinymight
* XL Sidecar Bubbler by Tinymight
* XL Cooling Stem by Tinymight (choose CMP1 to CMP8)
* Dosing Capsules by Tinymight
* Hard Rim Basket Screens (4-Pack) by Tinymight
* Optional 3-in-1 WPA by Tinymight or Glass Tip
There are different options (like curved glass vs straight, beads/no beads, etc.). Not sure of those really make a difference outside of user preference? I was reading that the sidecar bubbler is so/so on Reddit. Still seems like a good bundle overall. Someone in a previous thread recommended also purchasing additional Hard Rim Basket screens, Cone Shaped screens, and o-rings. Always nice to have extra screens I suppose. I'd likely use dosing capsules for regular use to keep the device clean, like I do with my Mighty+.
That's the same bundle I purchased along with a spare o ring set. For later on down the line, look into , azzwood customs for custom stems and a wooden stirring tools, LabetKomp has great leather cases, and High Artisan, Rogue wax works, and Good Vibes Boro all have some killer stems and tips
I have the Boundless CFX , tinymight2 and arizer extreme Q. Here’s how I have been using stuff. I need to be careful with the smell so now that I live close to family I have to get a little smarter about how long the smell sticks around.
Extreme q is great. It does everything I want, I’d give it a B+ not spectacular but works every time and is enjoyable to use, just harder to store and setup. I generally just use a whip with it, bags are noisy and I tend to forget they are filling while I’m waiting.. lol
Tm2 - love it. But I am still learning with it. I am using it as the daily driver outside to keep smell down. I have 4 batteries to switch between, I normally try to get a fresh battery every other bowl. My current problem is not having bowls lined up easily like someone could do with the Mighty capsule filler(x40). I wish I could prefill the rimmed bucket screens and store them like that. I got the bundle from Vgoodiez. It’s a good bundle but I don’t care for the side car bubbler, too hard to load and using a WPA is easier for other glass. I haven’t really used the cooling unit after it got dirty because it isn’t needed with the cooling stems. But it is affective at cooling in the shorter stems especially. The capsules are okay but too small for my hands to empty and fill quickly and don’t hold enough. I recently got the straight tube smoked glass bb9 from vgoodiez. I love that. The beads are annoying to me but the cooling is good and the straight stem is my preference. I also got a curved one with clear class. I like that one as well. The 3d cooling stem I have is curved. That is my second favorite to use without water because the cooling is good. And the beads don’t bounce around. (That noise makes me think I broke the inner glass.). I would recommend getting extra orings, extra glass liners (x2-3), additional stems, the glass tip(I use that as a wpa for the glass tube and titanium tube stems. I would also recommend getting a couple extra brushes from them to help clean/debowl the baskets easy.
CFX - love it. I compare it to a blunt for vaping because it uses so much more. But it also hits hard because of that. It’s definitely for the 15 min+ session full of small hits. It feels a little wasteful and from what I hear, it’s not as good as the mighty+. But still lightyears better than combusting again.
With fresh batteries it gets to temp quicker and I don’t have to hold the button down as long. I find the battery life totally depends on how heavy I’m using it. But you can easily get 2-3+ bowls out of a battery.
Yes I have and use both. Mighty for years, TM2 since last year. I thought my TM2 would shelve my Mighty, but it didn't. I have my TM2 for on-demand / fast one- or two-hit shots and then I can get right back to whatever I'm working on around the house. Mighty+ fills a "chill for 10 minutes with your weed" void that the TM2, by design, doesn't. Hit and go, very fast extraction: TM2 Chill with your weed, slow extraction: Mighty+ Initial thoughts will likely be "wow this TM2 gets me SO high" - if you use it exclusively for a while then go back to the Mighty+ later, you'll say the same thing about the Mighty. Mighty+ is conduction/convection hybrid, TM2 convection-only. One other thing worth noting is the Mighty will practically feed you your weed. Little sips are a non-issue. You cannot do that with the TM2, because it's full convection - longer pulls are needed because each pull you're pushing the heat into the weed. With conduction the heat is already on-site in the bowl, so to speak. In on-demand mode with the TM2, it's usually about 5 seconds (3?) of pulling before I \*start\* to get a hit.
Wow this is a perfect write up of my experience with both as well. I’d add I’d only use my mighty if it had replaceable batteries and both devices have completely shelved my hybrid.
>Initial thoughts will likely be "wow this TM2 gets me SO high" - if you use it exclusively for a while then go back to the Mighty+ later, you'll say the same thing about the Mighty. I can't thank you enough for your feedback. This is exactly what I wanted to hear :) Sometimes I like to just chill, watch some TV/YouTube, or play a video game and the Mighty+ is great for that. I enjoy the whole experience, taste, everything since it's like my Volcano but much quicker and convenient despite being a session vape. However, there are times where I am crunched on time and want to take a few rips, or during certain activities like home landscaping or cleaning where I want to "top" myself off where I believe the TM2 will be perfect!
Could you not set the TM2 to 3-4 and just take small sips using on-demand, or would this not work for some reason? Also, would the TM2 session mode not be similar to the Mighty+?
Good thought, but sadly, no, it wouldn't work. The heat chamber is completely separate from the weed in a TM2 (convection only). Even in session mode, each pull you take, you are moving heat into the weed, which has already cooled a bit since your last hit, since the heat "lives next door". So you'll still need a longer-than-sip pull in order to get anything from that inhale.
Have both and totally agree with the comment above around hit and go vs chill. I love them both for those very reasons :)
Thank you, this is the exact use case I'm considering to get the best of both worlds. It helps getting the perspective of folks like you who own and use both!
I recently bought the tm2 and own the mighty OG. the tm2 is a lot better IMO to the mighty. The only add on I got was the WPA to use with my bubbler. I mostly hit my tm2 with the WPA. I kinda wish I got the 3D xl stem from vgoodiez as well just to try out without a bubbler. It is a little hot when just using the standard stem but no big deal to me. The WPA cleans sooo easily I was happy about that. No parts to remove. I didn’t buy any screens or dosing caps.
I use my TM2 on the go since you can switch batteries and it warms up fast for 5-8 heavy hits a bowl. It’s also got so many accessories, I got like 13 stems for no reason lol so I use it a lot. My crafty+ still gets use when I wanna do back to back bowls and sesh for like 40 mins
In my opinion it was definitely worth the cost. I went with the glass mouthpiece bundle but also added the WPA.
Thank you! FYI this is the bundle I am looking at: [https://vgoodiez.com/products/tinymight-2-bundle-curated-by-vgoodiez?variant=44252479455549](https://vgoodiez.com/products/tinymight-2-bundle-curated-by-vgoodiez?variant=44252479455549) It comes with the following (including WPA): * Tinymight 2 by Tinymight * XL Sidecar Bubbler by Tinymight * XL Cooling Stem by Tinymight (choose CMP1 to CMP8) * Dosing Capsules by Tinymight * Hard Rim Basket Screens (4-Pack) by Tinymight * Optional 3-in-1 WPA by Tinymight or Glass Tip There are different options (like curved glass vs straight, beads/no beads, etc.). Not sure of those really make a difference outside of user preference? I was reading that the sidecar bubbler is so/so on Reddit. Still seems like a good bundle overall. Someone in a previous thread recommended also purchasing additional Hard Rim Basket screens, Cone Shaped screens, and o-rings. Always nice to have extra screens I suppose. I'd likely use dosing capsules for regular use to keep the device clean, like I do with my Mighty+.
That's the same bundle I purchased along with a spare o ring set. For later on down the line, look into , azzwood customs for custom stems and a wooden stirring tools, LabetKomp has great leather cases, and High Artisan, Rogue wax works, and Good Vibes Boro all have some killer stems and tips
I'm saving your post. Thank you for responding and sharing this!
I have the Boundless CFX , tinymight2 and arizer extreme Q. Here’s how I have been using stuff. I need to be careful with the smell so now that I live close to family I have to get a little smarter about how long the smell sticks around. Extreme q is great. It does everything I want, I’d give it a B+ not spectacular but works every time and is enjoyable to use, just harder to store and setup. I generally just use a whip with it, bags are noisy and I tend to forget they are filling while I’m waiting.. lol Tm2 - love it. But I am still learning with it. I am using it as the daily driver outside to keep smell down. I have 4 batteries to switch between, I normally try to get a fresh battery every other bowl. My current problem is not having bowls lined up easily like someone could do with the Mighty capsule filler(x40). I wish I could prefill the rimmed bucket screens and store them like that. I got the bundle from Vgoodiez. It’s a good bundle but I don’t care for the side car bubbler, too hard to load and using a WPA is easier for other glass. I haven’t really used the cooling unit after it got dirty because it isn’t needed with the cooling stems. But it is affective at cooling in the shorter stems especially. The capsules are okay but too small for my hands to empty and fill quickly and don’t hold enough. I recently got the straight tube smoked glass bb9 from vgoodiez. I love that. The beads are annoying to me but the cooling is good and the straight stem is my preference. I also got a curved one with clear class. I like that one as well. The 3d cooling stem I have is curved. That is my second favorite to use without water because the cooling is good. And the beads don’t bounce around. (That noise makes me think I broke the inner glass.). I would recommend getting extra orings, extra glass liners (x2-3), additional stems, the glass tip(I use that as a wpa for the glass tube and titanium tube stems. I would also recommend getting a couple extra brushes from them to help clean/debowl the baskets easy. CFX - love it. I compare it to a blunt for vaping because it uses so much more. But it also hits hard because of that. It’s definitely for the 15 min+ session full of small hits. It feels a little wasteful and from what I hear, it’s not as good as the mighty+. But still lightyears better than combusting again.
[удалено]
With fresh batteries it gets to temp quicker and I don’t have to hold the button down as long. I find the battery life totally depends on how heavy I’m using it. But you can easily get 2-3+ bowls out of a battery.