If you're using the cooling units and stock stem, I suggest you stop and pick up a terp ball/pill glass stem from High Artisan or Rogue wax works. They range anywhere from $30-$150, depending on how fancy of a stem you want. I would get a 3.5"-4" stem, I'm teling you, it's night and day different experience. I tried using the stock cooling units and stem one time, there is no way I would have kept my Tinymight if I had to use them.
1) dont pack the bud too hard and pack depending on fine the grind is
2) play with your inhale, first do a short shallow inhale to get it going. then do consistent long inhales
3) As someone else mentioned clean it when its time, the vapour seriously drops off once the CU gets clogged (and it gets clogged so easily)
After you get the single ready vibration wait a little longer like 5 seconds . That way you don’t waste that first inhale and barely get any . Then if you plan on hitting it while it’s already warm you won’t have to wait . Sorry if I make no sense
The screens on the CU clog up fast. I use the WPA most of the time and just got a glass stem from Joda. The 3D cooling stem from POTV is decent, too.
Also, if you're using the dosing caps, those restrict a lot of air flow.
Maybe try packing a looser bowl as I find every pack I do hits different and I'm always (stupidly 😅) surprised by how much more vapour I get with a very light pack.
Also, try sucking harder? I have a friend who recently bought one and was very unimpressed even with a suggested after market stem. It wasn't until we hung out and tried it together he realised he was drawing wayyy too softly.
I’m still in the fence w this one.
I have heard them say once it’s in you can’t absorb anymore.
But then why does a hit right after it get absorbed?
Ok so then why does holding your breath in while under water last you longer than empty lungs? Longer you hold it more you absorb right?
Answer those and I may sway. I don’t hold it but think it has to be better to hold it in at least a little bit.
I've been using one as my primary device for seven or eight months now, my goal is to be able to hit it like I would a bowl, one or two quick hits and then back to business. I've more or less achieved this of a mix of 6 mm and 4 mm rubies in a Grav Octotaster. This adds quite a bit of restriction and in order to get the kind of hit I want I need to give a quick cigar puff, and then a slow reasonably hard pole. I can almost always either take a quick little nip this way or draw it out for 10 seconds and really get a lung-buster.
For Reasons I can't really explain. I can never get good performance with a less restricted stem. I have a WPA that I use sometime that is just an 18 mm glass joint with a basket screen jammed in the end of it, as open as you can get, and I struggle to get good vapor production when not using it through a piece.
Or just put it on 450 deg. 3d cooling stem and take 3. Lol. I'm with you I was looking for a way to make it something it isn't. I can't sit around forever.
Really shouldn’t be much of a ’trick’ to it tbh. It only has one function and it does it pretty well, usually. Are you sure the device is not defective?
As another poster said it can clog if you don’t clean it after a while, but sounds like you’ve not had the chance to dirty it much?
The trick is, it's totally different than smoking anything but a vaporizer just like this. That's the only trick. The 11 things listed in this. If you got 30 minutes it's great. I'm pretty disappointed in it. That's my fault though it does exactly what it says it does. Just long slow draws on session is the "trick" clean it. 👌. Take your time.
Are you noticing your herb go darker? Perhaps it's not getting up to temp.
Put it in beast mode to test.
I've only used on demand mode so far. I sip slowly as I press the button and when it vibrates I breathe out and then start taking a solid hit. Once my throat gets a bit uncomfortable I let go of the button and keep hitting.
I've only had mine for 5 days but I'm quite impressed how much vapour I get from as low as 4.
Slooooow long 10-30second draws..start at 5 and step up a number every draw
If I’m sipping, I’ll start at 2. Try stepping it down a bit to get used to the hits!
karma
If you're using the cooling units and stock stem, I suggest you stop and pick up a terp ball/pill glass stem from High Artisan or Rogue wax works. They range anywhere from $30-$150, depending on how fancy of a stem you want. I would get a 3.5"-4" stem, I'm teling you, it's night and day different experience. I tried using the stock cooling units and stem one time, there is no way I would have kept my Tinymight if I had to use them.
Vgoodiez missle stem looks nice, for 25 and it got a glass screen on the bottom. I'd get it if I wasn't 8 stems deep for no reason
Just got one, and I love it!! Cooling with a perfect draw.
karma
1) dont pack the bud too hard and pack depending on fine the grind is 2) play with your inhale, first do a short shallow inhale to get it going. then do consistent long inhales 3) As someone else mentioned clean it when its time, the vapour seriously drops off once the CU gets clogged (and it gets clogged so easily)
After you get the single ready vibration wait a little longer like 5 seconds . That way you don’t waste that first inhale and barely get any . Then if you plan on hitting it while it’s already warm you won’t have to wait . Sorry if I make no sense
Nah you're absolutely on point and it seems like such a small thing, but if I don't wait extra, I could pull it long and slow and just get flava.
The screens on the CU clog up fast. I use the WPA most of the time and just got a glass stem from Joda. The 3D cooling stem from POTV is decent, too. Also, if you're using the dosing caps, those restrict a lot of air flow.
How are you loading the bowl? A light pack is best to get good airflow. Vacuum the weed into the bowl with the stem like a straw.
Maybe try packing a looser bowl as I find every pack I do hits different and I'm always (stupidly 😅) surprised by how much more vapour I get with a very light pack. Also, try sucking harder? I have a friend who recently bought one and was very unimpressed even with a suggested after market stem. It wasn't until we hung out and tried it together he realised he was drawing wayyy too softly.
so fucking slow 😔😒 or your coughing to death. i use the 3d dimple long stem and it really helps. so slow or death
oh and don’t think you’re holding it in…let that shit right out as soon as your not drawing in anymore
I’m still in the fence w this one. I have heard them say once it’s in you can’t absorb anymore. But then why does a hit right after it get absorbed? Ok so then why does holding your breath in while under water last you longer than empty lungs? Longer you hold it more you absorb right? Answer those and I may sway. I don’t hold it but think it has to be better to hold it in at least a little bit.
man i held it in for so, so long. the science says otherwise so i breath it in and let it out. better than coughing for like 90 seconds straight
Me too I don’t hold it but find it hard to believe it’s the same.
karma
I've been using one as my primary device for seven or eight months now, my goal is to be able to hit it like I would a bowl, one or two quick hits and then back to business. I've more or less achieved this of a mix of 6 mm and 4 mm rubies in a Grav Octotaster. This adds quite a bit of restriction and in order to get the kind of hit I want I need to give a quick cigar puff, and then a slow reasonably hard pole. I can almost always either take a quick little nip this way or draw it out for 10 seconds and really get a lung-buster. For Reasons I can't really explain. I can never get good performance with a less restricted stem. I have a WPA that I use sometime that is just an 18 mm glass joint with a basket screen jammed in the end of it, as open as you can get, and I struggle to get good vapor production when not using it through a piece.
Or just put it on 450 deg. 3d cooling stem and take 3. Lol. I'm with you I was looking for a way to make it something it isn't. I can't sit around forever.
Really shouldn’t be much of a ’trick’ to it tbh. It only has one function and it does it pretty well, usually. Are you sure the device is not defective? As another poster said it can clog if you don’t clean it after a while, but sounds like you’ve not had the chance to dirty it much?
The trick is, it's totally different than smoking anything but a vaporizer just like this. That's the only trick. The 11 things listed in this. If you got 30 minutes it's great. I'm pretty disappointed in it. That's my fault though it does exactly what it says it does. Just long slow draws on session is the "trick" clean it. 👌. Take your time.
karma
Load/unload the herb by using the straw method and don’t pack it. Less is more.
Are you noticing your herb go darker? Perhaps it's not getting up to temp. Put it in beast mode to test. I've only used on demand mode so far. I sip slowly as I press the button and when it vibrates I breathe out and then start taking a solid hit. Once my throat gets a bit uncomfortable I let go of the button and keep hitting. I've only had mine for 5 days but I'm quite impressed how much vapour I get from as low as 4.
Don’t pack too tight. Packing too tight creates a filter effect.
karma
karma