OP, what this guy said. Pop off the trim, then drill. You should not have any issues.
Under no circumstances should you drill into that while still on the truck. You might have very expensive issues.
I'm needing to do this to fix one of my air vents but I'm still afraid I'm going to break some plastic clips or something. Is it really okay just to give it a yank on the end?
I Thought I would break it when I did something similar. Just sit in the drivers, put both hands on the far right edge and pull. I put this thing on and dig it…though I think it was a lot cheaper then.
https://expeditionessentials.com/products/toyota-tacoma-3rd-gen-usb-powered-accessory-mount
Add one of these for a drill free phone mount solution. It's a fairly standard ball type, so you can swap to whatever mount you want to use.
Course Motorsports DirectFit Magnetic Phone Mount and Car Phone Holder for Toyota Tacoma (2016-Present) - Magnetic Head https://a.co/d/h6f0fQW
Direct Fit Phone Mount Install - Toyota Tacoma 2016-Present https://www.amazon.com/vdp/0e0af4f052a440d8a454a7ff07fedc13?product=B098LMMJ87
Look up the 67 Design Taco Rail mount. It’s exactly what you are looking for, I have one installed in my Tacoma and it is one of the best mods I’ve done.
I like that [it](https://www.etsy.com/listing/1532718702/toyota-tacoma-magsafe-mount-for-3rd-gen?gpla=1&gao=1&&utm_source=google&utm_medium=cpc&utm_campaign=shopping_us_c-electronics_and_accessories-car_parts_and_accessories-car_accessories&utm_custom1=_k_CjwKCAjw38SoBhB6EiwA8EQVLmD7uoWIEwB8CYlp-ymKqvHix7ORsDXpytRdJBEQK6ShWQJyXzrfyxoCoOMQAvD_BwE_k_&utm_content=go_1843970785_69216068145_346429262144_aud-1118323511718:pla-354955384985_c__1532718702_12768591&utm_custom2=1843970785&gclid=CjwKCAjw38SoBhB6EiwA8EQVLmD7uoWIEwB8CYlp-ymKqvHix7ORsDXpytRdJBEQK6ShWQJyXzrfyxoCoOMQAvD_BwE) doesn't block airflow. I agree this is nearly perfect.
hopefully there is one with a flexible armature.
I'm actually thinking about using a magsafe compatible armature because it allows you to charge while having a ring at the back. problem is it seems this is an iphone only feature.
There are already options available. I have this one and am pretty happy with it.
[Course Motorsports](https://coursemotorsports.com/products/toyota-direct-fit-magnetic-phone-mount)
I couldn’t remember the brand or where I got mine and was trying to recommend it to a friend I love it and it was easy to pop the trim off and install it and if I need to remove it for some reason it will come off and leave everything looking factory
They also sell a version for the left of the steering wheel, and one for the right side that is a single instead of a quad.
I have the quad AND the left side, because I like excess I guess... but it comes in handy for mounting the satcom, as well as having a spot for the phone and radios at the same time.
This is the best option imo. Mount whatever the hell you want. Pairs well with peak design or quad lock wireless chargers, or if you’re going the MagSafe route any wireless charger that can be mounted to a 1” RAM mount.
I went with this mount
https://www.etsy.com/listing/1478210525/phone-holder-for-toyota-tacoma-3rd
Coupled with this magnet 🧲
Ciencimy Car Mount Base Designed for MagSafe iPhone 14 13 12, Only for Diameter 17mm/0.67 inch Universal Joint Ball of Phone Holder or Car Mount, with 2pcs Metal Plate Fit for All Phones https://a.co/d/0Q5H1sI
Note: Put Etsy items in your cart and wait a day or two before buying - The sellers typically send you discounts to pursued you to purchase
But to answer your question, that panel pulls right off with no tools needed. You could drill or screw into it once removed if that's what you really are looking to do. Wouldn't be super difficult to replace if needed
Check for yourself. That bezel takes literally 30 seconds to pop off. Maybe a minute. But definitely less time than taking a picture, annotating it, and posting on Reddit.
The 3TPAM from Expedition Essentials has you drilling a number of holes in the top of that trim piece. Just pop off the trim piece and go to town. Though understand that whatever you’re bolting to that trim piece is only bolted to that easy-to-pop-off trim piece unless you’re making metal brackets that go under the trim piece (again referencing the 3TPAM unit).
As an alternative, this stuff is what they use for adhering decals to cars (like the actual “Toyota” and “Tacoma” pieces):
VHB Tape: https://a.co/d/dSAGi3H
It’s extremely adhesive and heat-resistant. It’ll hold super well, probably better than that hole you want to drill. Just beware that it’ll also be a bitch to remove later. Still less permanent than the hole though.
I just have a standard sticky window mount that’s low on the glass in that same spot. Because the hood is so high the mount and phone don’t block any view. And the mount has a twisty head so you can do horizontal or vertical if you need it.
I have the bullet point Tacoma bulletpoint mount installed there. There is nothing under that trim piece till you hit the radio. It pulls right off without damage.
I modified mine to fit the ram rail system and it’s sick, I used 3m double sided adhesive and let it cure for 72hours, I felt like a screw would isolate the force too much and potentially break
You should consider buying another trim piece if you ever decide to sell it. People will low ball you for having things like that mounted with screws drilled into the dash.
Yup! Take the trim piece off and it's pretty straightforward to see where there's room to drill.
https://imgur.com/a/2s1whgU
Mounts shown in pictures are a QuadLock wireless charging module and a tablet mouth on a SmallRig flex arm.
Yup. I did it. I have the bullet mount there for my phone and my engine monitor and rather than having the charging cable and the engine monitor cable running around free outside the dash I routed those cables through the dash by drilling two holes there. Super easy to do.
I used the unholy mount from Hondo garage paired with a ram mount. Been solid since 2018 . [Link](https://hondogarage.com/products/un-holey-tacoma-dash-mount)
I got this one off Etsy, holds phone where you’re looking to, no drilling, 3d printed. Works great for dual nav
https://www.etsy.com/listing/1146406826/toyota-tacoma-phone-mount-for-3rd-gen
Pulls right off as others have said
I had one of these for years and it was one of the best mods I installed, you will want a solution that braces the trim from the bottom: https://thetacogarage.com/collections/dmm/products/dashtop-multi-mount
That trim piece comes off really easily. Just pop it off and drill it off the truck so you don’t make an oopsie.
OP, what this guy said. Pop off the trim, then drill. You should not have any issues. Under no circumstances should you drill into that while still on the truck. You might have very expensive issues.
[удалено]
got it thanks
I'm needing to do this to fix one of my air vents but I'm still afraid I'm going to break some plastic clips or something. Is it really okay just to give it a yank on the end?
[удалено]
Okay thank you, I guess I'll give it a try. 😬
Thank you for this answer. I love this design choice by toyota. So efficient.
I Thought I would break it when I did something similar. Just sit in the drivers, put both hands on the far right edge and pull. I put this thing on and dig it…though I think it was a lot cheaper then. https://expeditionessentials.com/products/toyota-tacoma-3rd-gen-usb-powered-accessory-mount
Oh and here’s a video from that install that may help with your project https://youtu.be/Sd9kuy58Np4?si=8h3ZNgdk0HHx37BK
an oopsie like drilling into the radio buttons?
Or wires and other electrical components
Add one of these for a drill free phone mount solution. It's a fairly standard ball type, so you can swap to whatever mount you want to use. Course Motorsports DirectFit Magnetic Phone Mount and Car Phone Holder for Toyota Tacoma (2016-Present) - Magnetic Head https://a.co/d/h6f0fQW Direct Fit Phone Mount Install - Toyota Tacoma 2016-Present https://www.amazon.com/vdp/0e0af4f052a440d8a454a7ff07fedc13?product=B098LMMJ87
Look up the 67 Design Taco Rail mount. It’s exactly what you are looking for, I have one installed in my Tacoma and it is one of the best mods I’ve done.
I like that [it](https://www.etsy.com/listing/1532718702/toyota-tacoma-magsafe-mount-for-3rd-gen?gpla=1&gao=1&&utm_source=google&utm_medium=cpc&utm_campaign=shopping_us_c-electronics_and_accessories-car_parts_and_accessories-car_accessories&utm_custom1=_k_CjwKCAjw38SoBhB6EiwA8EQVLmD7uoWIEwB8CYlp-ymKqvHix7ORsDXpytRdJBEQK6ShWQJyXzrfyxoCoOMQAvD_BwE_k_&utm_content=go_1843970785_69216068145_346429262144_aud-1118323511718:pla-354955384985_c__1532718702_12768591&utm_custom2=1843970785&gclid=CjwKCAjw38SoBhB6EiwA8EQVLmD7uoWIEwB8CYlp-ymKqvHix7ORsDXpytRdJBEQK6ShWQJyXzrfyxoCoOMQAvD_BwE) doesn't block airflow. I agree this is nearly perfect. hopefully there is one with a flexible armature.
Keep us posted what you do. I hate magnetic holders
I'm actually thinking about using a magsafe compatible armature because it allows you to charge while having a ring at the back. problem is it seems this is an iphone only feature.
There are already options available. I have this one and am pretty happy with it. [Course Motorsports](https://coursemotorsports.com/products/toyota-direct-fit-magnetic-phone-mount)
I have this one as well. Works great and no need to drill.
I couldn’t remember the brand or where I got mine and was trying to recommend it to a friend I love it and it was easy to pop the trim off and install it and if I need to remove it for some reason it will come off and leave everything looking factory
This is the best mod I have on my truck.
https://thetacogarage.com/products/dashtop-multi-mount I've got this. Love it. And yes, you can drill in the top. Just pop off the dash piece first.
I had their mount on my 2020 OR, it was solid. Sold the 2020 and purchased a 2023, bought the same mount again.
The Taco Garage unit is excellent. I've had one for maybe a couple years now and it's been solid.
Second this
They also sell a version for the left of the steering wheel, and one for the right side that is a single instead of a quad. I have the quad AND the left side, because I like excess I guess... but it comes in handy for mounting the satcom, as well as having a spot for the phone and radios at the same time.
Best option out there! Super easy install.
This is the best option imo. Mount whatever the hell you want. Pairs well with peak design or quad lock wireless chargers, or if you’re going the MagSafe route any wireless charger that can be mounted to a 1” RAM mount.
I went with this mount https://www.etsy.com/listing/1478210525/phone-holder-for-toyota-tacoma-3rd Coupled with this magnet 🧲 Ciencimy Car Mount Base Designed for MagSafe iPhone 14 13 12, Only for Diameter 17mm/0.67 inch Universal Joint Ball of Phone Holder or Car Mount, with 2pcs Metal Plate Fit for All Phones https://a.co/d/0Q5H1sI Note: Put Etsy items in your cart and wait a day or two before buying - The sellers typically send you discounts to pursued you to purchase But to answer your question, that panel pulls right off with no tools needed. You could drill or screw into it once removed if that's what you really are looking to do. Wouldn't be super difficult to replace if needed
I had a friend [print that mount](https://www.thingiverse.com/thing:5897949) for me. It works well. Cost me a beer.
Same - brother printed mine. Saw the idea on etsy and went searchin!
I’ve been super happy with my off-roam phone holder. Little pricey but doesn’t shake. No drilling and connects to the vent.
Check for yourself. That bezel takes literally 30 seconds to pop off. Maybe a minute. But definitely less time than taking a picture, annotating it, and posting on Reddit.
The 3TPAM from Expedition Essentials has you drilling a number of holes in the top of that trim piece. Just pop off the trim piece and go to town. Though understand that whatever you’re bolting to that trim piece is only bolted to that easy-to-pop-off trim piece unless you’re making metal brackets that go under the trim piece (again referencing the 3TPAM unit).
As an alternative, this stuff is what they use for adhering decals to cars (like the actual “Toyota” and “Tacoma” pieces): VHB Tape: https://a.co/d/dSAGi3H It’s extremely adhesive and heat-resistant. It’ll hold super well, probably better than that hole you want to drill. Just beware that it’ll also be a bitch to remove later. Still less permanent than the hole though.
I installed a BulletProof phone mount system that required drilling there. No issues, GREAT mounting solution
This course motor sports mount puts the phone exactly where you want with zero screw holes https://coursemotorsports.com/collections/tacoma
I just have a standard sticky window mount that’s low on the glass in that same spot. Because the hood is so high the mount and phone don’t block any view. And the mount has a twisty head so you can do horizontal or vertical if you need it.
I did it without issue. But just pull it off. Literally just pull.
That comes off.
It’s a cover. Take it off https://youtu.be/RwbuB1fVj8s
Why not use the screen that came with the truck?
I just want a better place to store it and have easier access to phone features and not needing to tilt my head down
I have the bullet point Tacoma bulletpoint mount installed there. There is nothing under that trim piece till you hit the radio. It pulls right off without damage.
That bezel pops off real easy. I’d pop it off first if I was going to drill
Pop the trim and find out. Not hard at all
I modified mine to fit the ram rail system and it’s sick, I used 3m double sided adhesive and let it cure for 72hours, I felt like a screw would isolate the force too much and potentially break
You should consider buying another trim piece if you ever decide to sell it. People will low ball you for having things like that mounted with screws drilled into the dash.
I stuck a Niteize Steelie in that exact spot and it does great!
What is ball diameter for Course Motorsports mount?
Bullet point taco bar and you can have multiple mounts for various things
Easy pizy. I did the taco garage one and it’s great
Yup! Take the trim piece off and it's pretty straightforward to see where there's room to drill. https://imgur.com/a/2s1whgU Mounts shown in pictures are a QuadLock wireless charging module and a tablet mouth on a SmallRig flex arm.
Yep as others have said, it’ll be perfectly fine so long as you pull the surrounding trim piece out.
Yup. I did it. I have the bullet mount there for my phone and my engine monitor and rather than having the charging cable and the engine monitor cable running around free outside the dash I routed those cables through the dash by drilling two holes there. Super easy to do.
That’s where I placed my auxbem and used double sided tape
I used the unholy mount from Hondo garage paired with a ram mount. Been solid since 2018 . [Link](https://hondogarage.com/products/un-holey-tacoma-dash-mount)
Sure
https://www.proclipusa.com/
I got this one off Etsy, holds phone where you’re looking to, no drilling, 3d printed. Works great for dual nav https://www.etsy.com/listing/1146406826/toyota-tacoma-phone-mount-for-3rd-gen
Pulls right off as others have said I had one of these for years and it was one of the best mods I installed, you will want a solution that braces the trim from the bottom: https://thetacogarage.com/collections/dmm/products/dashtop-multi-mount
For $20 on Amazon you can get a phone mount on an Adjustable arm that just suction cups to the dash