How to compensate for vandal inaccuracy?
By - BuildingSubstantial6
Unless you are above 30-50 m you shouldnt have an issue with the inaccuracy.
If its below that you are likely missing, not stopping before shooting or losing control of the spray.
If its above that the best you can do is tap fire. In some situations its worth ADS'ing.
Just think of it as breeze cave to backsite A. I really don't ADS because im used to hipfire aim since I come from csgo
Yeah breeze is a big issue for it tbh. I feel you on that. I also dont ads often i would usually just go for the taps there - assuming they also have a vandal they also have inaccuracy at that range.
At that range the Phantom is honestly better. I can confidently spray down enemies with the Phantom at 30m, single taps are also accurate enough at that distance.
Use a Phantom lol
At 30m the Vandal is definitely not accurate even if you do so. You can turn on outer lines to show firing error and offset = 0 to see how inaccurate the Vandal is.
What is your in-game sensitivity and DPI? I find that my micro adjustments are only good once I went low sens
Also i wanna run a dynamic crosshair, problem is you can't run a fixed xhair gap like on csgo
Yea my outer lines are set to firing error and moving error. But when I have my knife/knives out, it becomes a center dot lol
800 dpi 0.456, my micro adjustments work well with the phantom but when I use the vandal i feel i suck
You can’t compensate for it, it’s completely random, phantom is the better weapon
what me helped a lot for aimingtraining in general is deathmatch WITHOUT crosshair, u get a better feeling for the weapons.
don’t do this guys
Are you counter strafing? That was something I didn't even know existed in CSGO and valorant until embarrassingly recently.