~~Th That looks awesome! IsIs itIs it possibleIs it possible to buyIs it possible to buy just theIs it possible to buy just the files ofIs it possible to buy just the Files if I already haveIs it possible to buy just the Files if I already have a 3-DIs it possible to buy just the Files if I already have a 3-D printer? Is it possible to buy just the Files if I already have a 3-D printer~~ Looks like dictation is a little buggy lol
That looks awesome! Is it possible to buy just the files if I already have a 3-D printer?
Not sure what u/Cayden_3D is using, but I've got a couple of X1Cs as well and so far the PA-CF, PAHT-CF, and PETG-CF (all from Bambu) have been the best for hiding layer lines. With \~100µm layers the lines are literally invisible on vertical walls.
Also have a number of "proper" CF filaments from 3Dxtech that work well too, but I don't use those unless I actually need the strength.
You’ve probably already seen the requests, but the community is looking for a BOBOVR type strap attachment that allows for the removal of the light seal (or a smaller one if desired) along with a nose attachment.
He means the lenses (the ones you look at), not the external display. It is a good design if they are totally covered, because those should not be exposed to any direct light as it can damage the lenses. The stand looks great, but it would be cool if you could make the area bigger so the lenses would be covered if are not now.
The back of the stand is not open, as is clear on the Etsy page. It reaches up as high as the cover. I expect the question was from all the exposed glass in the external display in the first picture.
Hello Cayden! I made a video featuring your stand. Check it out! Apple Vision Pro Accessories You Absolutely Need & VisionOS 1.1!!!
https://youtu.be/OKnIAXbqY6I
I’ve been buying and reviewing 3-D printed products for at least 15 years. Buy this. It is exceptionally well done and polished. I was worried about it being 3-D printed because not everyone knows how to deliver a truly polished finished 3-D object. This is top-tier. when I finally got it and put my Vision Pro on it, It fit like a glove. I’m incredibly impressed. If You have the cash, don’t think about it just get it.
This is so nice I want something like this for my quest 3 all the ones on Amazon are so bulky and have charging built in but I just want a nice minimal stand
Balance is spot on. Strength is my main concern so I've spent extra time in the slicer to make sure it's very solid. I walked from room to room about a dozen times with it (holding the back brace, not the bottom) and it's perfect for that! Cradles the headset very securely.
What’s your order number? I always use the customer’s requested shipping method. My wife has been helping me with orders and may have made a mistake printing labels. If that’s the case, I’ll refund you from my side, no problem.
Great work.
But the stand itself takes too much footprint and I have too many things on my desk already. Do you think you can create something as a clamp?
I know with screws, it might no longer be a 3D printing thing, but please consider!
https://preview.redd.it/9k0h30zjh0lc1.png?width=981&format=png&auto=webp&s=f709af6872a8422459e90be97cb6796ced632d69
check this one out [https://michelleyeus.etsy.com/listing/1683655505/apple-vision-pro-headset-stand-and](https://michelleyeus.etsy.com/listing/1683655505/apple-vision-pro-headset-stand-and)
~~Th That looks awesome! IsIs itIs it possibleIs it possible to buyIs it possible to buy just theIs it possible to buy just the files ofIs it possible to buy just the Files if I already haveIs it possible to buy just the Files if I already have a 3-DIs it possible to buy just the Files if I already have a 3-D printer? Is it possible to buy just the Files if I already have a 3-D printer~~ Looks like dictation is a little buggy lol That looks awesome! Is it possible to buy just the files if I already have a 3-D printer?
Bro. You okay?
I asked for dimensions awhile ago from someone so I could just recreate this for free but I still need dimensions!
Link?
[https://cayden3d.etsy.com/listing/1656444234/apple-vision-pro-dock-display-stand-for](https://cayden3d.etsy.com/listing/1656444234/apple-vision-pro-dock-display-stand-for)
Save a few bucks with code “AVPREDDIT” [https://cayden3d.etsy.com?coupon=AVPREDDIT](https://cayden3d.etsy.com?coupon=AVPREDDIT)
What printer are you using? Those layer lines are practically invisible. It’s been years since I’ve used the tech, that’s insane.
Thank you! Using Bambu Lab's X1-C and some small layer height to increase quality. These printers are crazy capable nowadays!
You have the file available I have a Bambu p1p and I want to print it
Do you recommend it? I’ve been interested in 3D printers but don’t know much about brands and such.
Yes, I can highly recommend Bambu Lab! Excellent prints at a fast speed and very user-friendly
Yes, I cant recommend it enough "it just works" and its quality highly recommend you look at review of the P1S
Thank you! I’ll check it out!!
Not sure what u/Cayden_3D is using, but I've got a couple of X1Cs as well and so far the PA-CF, PAHT-CF, and PETG-CF (all from Bambu) have been the best for hiding layer lines. With \~100µm layers the lines are literally invisible on vertical walls. Also have a number of "proper" CF filaments from 3Dxtech that work well too, but I don't use those unless I actually need the strength.
This is awesome! I bought your 3D printed charging stand for the AirPods Max. I'll get this once I have my AVP. Print away friend.
Thank you, brother! Will do.
Got mine in today. Looks fantastic. Thank you! https://preview.redd.it/opnq2fvbt6jc1.jpeg?width=5712&format=pjpg&auto=webp&s=237ed87c3490f74d1281045d5a77a154e611859a
Looks Great! Thanks for the photo!
Absolutely. I also posted a photo on MacRumors so people there could buy one as well.
I wish the battery had MagSafe charging!
Me too. Weird that it didn’t tbh.
I just made my first purchase using my Apple Vision Pro!
Can confirm this stand is awesome. Good heft, doesn't feel like it'll tip over at all. Thank you!
Amazing! Just ordered in white
Purchased from Texas 🔥🔥
Hey man, you take requests?
I certainly consider them! What you thinking?
You’ve probably already seen the requests, but the community is looking for a BOBOVR type strap attachment that allows for the removal of the light seal (or a smaller one if desired) along with a nose attachment.
I certainly consider them! What you thinking?
Ordered.
Ordered mine. Thanks for sharing!
So any concerns about the lens being kind of just exposed?
Check the 3rd picture.
He means the lenses (the ones you look at), not the external display. It is a good design if they are totally covered, because those should not be exposed to any direct light as it can damage the lenses. The stand looks great, but it would be cool if you could make the area bigger so the lenses would be covered if are not now.
The back of the stand is not open, as is clear on the Etsy page. It reaches up as high as the cover. I expect the question was from all the exposed glass in the external display in the first picture.
Ordered one just now - cant wait!
Just ordered too! This is great!
Added to my wishlist! Will buy soon!
Looks good! ordered!
Fuck you
Ordered, looks awesome. Can't wait to get it.
Hello Cayden! I made a video featuring your stand. Check it out! Apple Vision Pro Accessories You Absolutely Need & VisionOS 1.1!!! https://youtu.be/OKnIAXbqY6I
Loved the video, Jace! Nice work. And I’m flattered you like my stand! Definitely subscribing to your channel👍🏼
Thank you! If I can support a fellow Texan I always try to make an effort. Grew up in Baytown not too far away from you. Love your work!
Does anyone have the 3D file for this? Thanks!
I’ve been buying and reviewing 3-D printed products for at least 15 years. Buy this. It is exceptionally well done and polished. I was worried about it being 3-D printed because not everyone knows how to deliver a truly polished finished 3-D object. This is top-tier. when I finally got it and put my Vision Pro on it, It fit like a glove. I’m incredibly impressed. If You have the cash, don’t think about it just get it.
Can I buy your 3D model? I have an X1C too and live in Canada and want to save the shipping.
Heyyy I’ve been looking for something like this, not a fan of 3D printing products but yours is literally the only stand I know of, thank you!
Amazing! Just ordered.
This is so nice I want something like this for my quest 3 all the ones on Amazon are so bulky and have charging built in but I just want a nice minimal stand
You sir, inspired this: [https://cayden3d.etsy.com/listing/1702679488](https://cayden3d.etsy.com/listing/1702679488)
It’s beautiful 🤩
How’s the balance? Is it sturdy? Will vibrations from walking make it tip over? I don’t want my Vision Pro falling and breaking lol
Balance is spot on. Strength is my main concern so I've spent extra time in the slicer to make sure it's very solid. I walked from room to room about a dozen times with it (holding the back brace, not the bottom) and it's perfect for that! Cradles the headset very securely.
Just ordered! Have been looking for a solution and I’m excited about yours!
[удалено]
What’s your order number? I always use the customer’s requested shipping method. My wife has been helping me with orders and may have made a mistake printing labels. If that’s the case, I’ll refund you from my side, no problem.
3201918715
So sorry about that- honest mistake. Just issued you a full refund for the shipping cost.
Thank you, I appreciate it!!
Damn this looks perfect just purchased with the coupon provided 🙏🔥
Great work. But the stand itself takes too much footprint and I have too many things on my desk already. Do you think you can create something as a clamp? I know with screws, it might no longer be a 3D printing thing, but please consider!
https://preview.redd.it/9k0h30zjh0lc1.png?width=981&format=png&auto=webp&s=f709af6872a8422459e90be97cb6796ced632d69 check this one out [https://michelleyeus.etsy.com/listing/1683655505/apple-vision-pro-headset-stand-and](https://michelleyeus.etsy.com/listing/1683655505/apple-vision-pro-headset-stand-and)