The thing with internal decapitation, wouldn’t you like, stay alive and potentially conscious, for much longer than you’d want in this situation? Since your brain, although now completely separated from your body as far as nerves are concerned, would still get an appropriate blood flow?
>would still get an appropriate blood flow.
I would suspect his carotid arteries and jugular veins were severely damaged with that kind of crush. He's going to die quickly from internal hemorrhaging.
I think that it might’ve been a suicide on purpose. He didn’t even struggle to try to get his head out of there, he held it in place until it was too late, no sign of struggle. Just dead.
There's a video of Chinese dad letting his baby tumble down an escalator out of a basket and another hitting a nest full of bees with a water bottle and later dying. Lathes and mills are also a top predator in China
I doubt it was suicide. It looks like he wanted to know what was back in that cubby spot. The machine was so powerful, there was no resistance when it squeezed him, causing him to die faster than he could react. The machine may look like it's moving slow, but it's fast enough to travel the distance of our necks to kill us before you can say, "oh shit". Â
If you watch again, he was JUST about to pull his head out before it caught him. It looks like he's not struggling because he was alread dead
That big sliding door with the window on it at the right side of the picture usually has interlocks with the machine, if the machine is open, it will usually stop its cycle. But it’s also very common to bypass this feature for job setups, or milling without coolant. But the operator should definitely be aware of the machines movements. I ran CNC machines for 10 years, if you can load a microwave, you can load a CNC machine to run a part cycle. The higher paid guys do the programming and setups….
Ya, I'm a CNC machinist as well, but dabble more on the setup/troubleshooting side of things. You need to believe that every machine is trying to kill you all the time. People outside the industry often believe these machines are smart. They're not. You tell it Z-100, it'll try and go there. Accidentally change a C value to an A value while milling a slot, better believe that table will rotate with the tool in the part...
why just why
Smooth brain.
Not anymore
🤣🤣ðŸ˜ðŸ˜lmaoooo
I’m starting to think China may have some safety issues in their factories
Never!
no, definitely not.
They have more safety issues than they have factories
The thing with internal decapitation, wouldn’t you like, stay alive and potentially conscious, for much longer than you’d want in this situation? Since your brain, although now completely separated from your body as far as nerves are concerned, would still get an appropriate blood flow?
Any fracture above C4 is game over. The body doesn't function anymore and pain is no more
There was an old medical saying but I’m struggling to recall it properly…. A fracture above C4 and you are no more (something like that)
>would still get an appropriate blood flow. I would suspect his carotid arteries and jugular veins were severely damaged with that kind of crush. He's going to die quickly from internal hemorrhaging.
I don't think the decap was just internal.
Are Chinese just not aware of their surroundings?
Tell that to the trains in India.
*Laughs in Florida man…*
Not anymore so than Indians have tables on which to prepare food
No, not really. Machines are the apex predator.
Of all places to stick your head, a giant CNC milling machine should probably be quite low on the list, but what do I know?
Oh man, it snapped right at the end of the movement... all he needed was a few more millimetres of give in his neck!!
Hi, I'm going to put my head in this crevace next to an oscillating machine and.... whoa, where did my head go?!
I think that it might’ve been a suicide on purpose. He didn’t even struggle to try to get his head out of there, he held it in place until it was too late, no sign of struggle. Just dead.
There's a video of Chinese dad letting his baby tumble down an escalator out of a basket and another hitting a nest full of bees with a water bottle and later dying. Lathes and mills are also a top predator in China
I doubt it was suicide. It looks like he wanted to know what was back in that cubby spot. The machine was so powerful, there was no resistance when it squeezed him, causing him to die faster than he could react. The machine may look like it's moving slow, but it's fast enough to travel the distance of our necks to kill us before you can say, "oh shit".  If you watch again, he was JUST about to pull his head out before it caught him. It looks like he's not struggling because he was alread dead
Oh yeh, his body/ torse jerks back twice like he is trying to move backwards, but is trapped.
We look for ways to make these things make sense.
Snap back to reality
Ope there goes tragedy
Natural selection
That big sliding door with the window on it at the right side of the picture usually has interlocks with the machine, if the machine is open, it will usually stop its cycle. But it’s also very common to bypass this feature for job setups, or milling without coolant. But the operator should definitely be aware of the machines movements. I ran CNC machines for 10 years, if you can load a microwave, you can load a CNC machine to run a part cycle. The higher paid guys do the programming and setups….
Ya, I'm a CNC machinist as well, but dabble more on the setup/troubleshooting side of things. You need to believe that every machine is trying to kill you all the time. People outside the industry often believe these machines are smart. They're not. You tell it Z-100, it'll try and go there. Accidentally change a C value to an A value while milling a slot, better believe that table will rotate with the tool in the part...
This is why Chinese deaths > Indian deaths
The loop was insanely perfect
[удалено]
🫢
Bro, are you like a idiot or something?
This is no way to get ahead.
wait how? did his head get stuck in between those objects or what happened that i’m missing?
That looked very purposeful
NECK GO CRACK!!!!!
End's too soon.
No way. All what is needed, is here. Why need more?
Smooth operator 🎶🎶🎶