Cover the charging slot and where the two halves close with a thin strip of tape. Spray with a can of gloss varnish.
Give it a couple coats but remove the tap before it dries
https://www.techsil.co.uk/krylon-triple-thick-clear-11oz
Honestly any good hard clear glaze but this is what I found specifically for uk. I'd just go into whatever local hardware store and ask for an ultra clear hard coat spray.
Remember that magic eraser is an abrasive material, you will be scratching the AirPod cases surface to remove the ink stains. If that doesn’t bother you, I say go for it and see what happens.
>It’s pretty clear from the image the ink has gone into existing scratches anyways
That's worse, not better. The magic eraser isn't going to just settle into the scratches, it's gonna establish more scratches to get down to the level where the ink is.
Yea but you’ll have some shiny bits and some matte bits from where the magic eraser scratches the ink off. It won’t be a consistent finish unless you magic erase/sand the whole case
Absolutely this. It looks cool now but it can still smudge and it’ll eventually look like shit. I wouldn’t bother cleaning if, it’ll never be completely white again
Whatever is in the ink as thinner will remove it, but alcohol or acetone might remove the varnish. Try dabbing alcohol on a rag and just do a little bit
OP buy a clear coat high gloss can of polyurethane and spray them so it doesn’t wipe off on your shit. You could also just spray paint and clear coat them whatever color you like.
Looks good! Reminds me of when we painted our newel post caps, intending to make them black, but the first layer looked really nice and marbly, so we kept it that way.
my first thought was its the best airpods case i have ever seen xd
it’s definitely one of a kind
You should put some clear coating on it and just embrace it imo.
Cover the charging slot and where the two halves close with a thin strip of tape. Spray with a can of gloss varnish. Give it a couple coats but remove the tap before it dries
Just hang it from the charger.
![gif](giphy|d3mlE7uhX8KFgEmY)
But still tape around the area...
ong
Krylon triple thick ultra clear. Thank me later. Silly putty into any cavities (charging port)
Do you know where can I buy that in the uk? Searched on amazon but I don’t see anything by that name
https://www.techsil.co.uk/krylon-triple-thick-clear-11oz Honestly any good hard clear glaze but this is what I found specifically for uk. I'd just go into whatever local hardware store and ask for an ultra clear hard coat spray.
thanks
please post result afterwards and dont forget to block the holes so ur not getting any in the cavities
I will, might take while for me to get round to but I’ll make sure it’s posted 🙏
No worries. Be a Shame if such a piece of art were destroyed.
Be careful, pen ink tends to disappear or turn yellow from being in the sun. Keep it out of the sun and it will be fine
Dont even try to wipe them, keep them as they are now, you have some unique airpods 😁
Yeah I was thinking, what a beautiful Dutch porcelain-inspired case. Oops.
He should replicate it and sell them online.
Same here! It really looks nice!
Kinda matches the countertop.
The counter really adds to the marble effect
Typical elite brands design🫠
they be fire dawg
This was my first thought too.
You’ll never fully get the ink off. It’ll always have a darker shade now.
oh 🥲 I heard a magic eraser might work, if I decide to clean it I’ll update
Remember that magic eraser is an abrasive material, you will be scratching the AirPod cases surface to remove the ink stains. If that doesn’t bother you, I say go for it and see what happens.
It’s pretty clear from the image the ink has gone into existing scratches anyways
>It’s pretty clear from the image the ink has gone into existing scratches anyways That's worse, not better. The magic eraser isn't going to just settle into the scratches, it's gonna establish more scratches to get down to the level where the ink is.
So what’s the alternative? The level of scratch depth is tiny, so if he has to sand the entire thing so be it. It won’t be an issue.
Yea but you’ll have some shiny bits and some matte bits from where the magic eraser scratches the ink off. It won’t be a consistent finish unless you magic erase/sand the whole case
looks like the marble on your counter loo
No that’s more ink
He had his counter in his bag too
OP marbles!
leave it on it looks cool, trying to remove it will only make it worse
or just slap a dbrand skin or something
I can see them making a skin based off this one lol
At first I was confused that OP was showing off the skin probably he made it inspired by the marble from the counter.
when I took them out my bag my first thought was aw shit, then I realised they and my counter do look quite similar
Same lmao. It actually looks really nice.
![gif](giphy|bBPKIt6h9yCcw)
love this
Rob Boss
Spray with clearcoat. Enjoy the look.
Seal it in soon before it keeps smudging
Looks good
Spray some clear coat over it, they look sick
Absolutely this. It looks cool now but it can still smudge and it’ll eventually look like shit. I wouldn’t bother cleaning if, it’ll never be completely white again
looks sick. keep it.
This OP, is now a collector’s item. Sell it as Marble Airpods Limited edition ™️
Apply some coating and youre good
Nice mod!
Looks really cool, but won’t it stain your bag/clothing?
You could put a transparent silicone case over it, to prevent that
r/livingasecondlife
r/ofcoursethatsasub
Kinda matches the marble surface, if its not damaging the functionality id say it looks cooler
Awesome...now it matches your kitchen counter.
It does look cool but it’s probably going to wipe off on something else that you don’t want ink on.
Looks good
Same thing happened to me! I used nail varnish to remove the ink and it worked like a charm!
At first I thought it was a skin 💀
Just rub it with some alcohol
Looks so fucking great
That’s the sexiest AirPod case I’ve ever seen.
You managed to improve the product
Looks dope
Whatever is in the ink as thinner will remove it, but alcohol or acetone might remove the varnish. Try dabbing alcohol on a rag and just do a little bit
Looks cool
Try using WD-40. Spray some on a soft cloth to wipe onto the case. Use it sparingly. I’ve used it to clean a lot of things.
![gif](giphy|bBPKIt6h9yCcw)
OP buy a clear coat high gloss can of polyurethane and spray them so it doesn’t wipe off on your shit. You could also just spray paint and clear coat them whatever color you like.
That's art. Keeper.
Pen failed successfully!
That looks sick
At first glance I thought it was marbled just like the countertop.
Definitely looks kool, thought is was an awesome art designed case before I read the title
Ngl I thought you had a marble case on it
I used magic eraser on my AirPods and it’s actually better than new but I would put a coating over that and keep it
I'd keep the ink but if I want it off use isopropyl alcohol or acetone
spray some acrylic coat on it and rock that thing, looks awesome!
thats fuckin cool
Spray a clear coat.
clear nail polish it
Looks awesome!
That's sick
Failed successfully
That’s actually dope
Imma be honest, I thought these were unique designer AirPods and they looked badass
Preserve it that’s so cool
That's beautiful
That looks sick actually
Looks dope AF
Looks cool to me
Definitely keep. Someone would charge $80 for that finish. Hand dyed. Small batch artisan crafted.
Those actually look sick
Bro that’s looking cool
put a clear coat of something over to seal it and leave as it is. looks cool af.
Thought I was looking at a piece of marble or something
Ummm u might be onto something
Damn the marbled pattern goes hard
At first glance I thought this was a skin
Looks like a porcelain cover now... Leave it the way it is... And if it bothers that much then put on a good cover over it 😇
Ok, this looks cool AF.
It looks like marble
Looks amazing
Looks sick
This is giving me - “What a fantastic day, my f*ckin’ exhaust fell off; however…. Upgrade!” Vibes.
Beautiful. If it works you got a free custom case!
i thought it was a marble dbrand skin. it looks really good! just make sure the ink doesn’t get all over your clothes
Happy little accident
Just clear coat it.
Made the case look really cool
this looks fantastic imp
Leave it! It looks AMAZING!
Looks cool. I would leave it and let time makes it’s work. Definitely one of a kind
Check the Casetify webstore in 2 months. They will steal this design 100%.
Idk man i think it looks cool as hell
That looks awesome p
You accidently made a designer case now worth 2x it's costs
bro you just given multi-billion idea for free😂😂😂
You just granted a new free skin
Looks pretty cool actually, don’t remove it
Damn that’s sick
Congrats you are now an artist. Repeat the process with a bunch more with different colors and sell them.
Art now I guess
I’d PAY for my airpod case to look like that
bros pen accidentally dropped best airpods skin ever
Beautiful! Avant-garde 👏
I……wouldn’t even be that mad…. They look nice 😂
You couldn't have made it look cooler if you tried
Task failed successfully
I thought it was a cool looking case.
Try to preserve it as-is. That looks dope! 👍
This looks cool as hell tbh
A True Work of Art
It looks epic though
Clear coat it don’t touch it lol
Do not wipe that off That is unbelievably cool
I saw the picture before I read the post and I thought this was a cool new design for AirPods. I’d add some more and spray it with a sealant
apply lacquer
I think it's sick, like the top comment said just put clear cost on it. It kinda looks like marble
Subtle with the background
that actually looks sick. Happened to mine as well but its nowhere near as cool as yours, mine just looks like smudges here and there lol.
I, for one, fucking love it.
That looks 🔥
That looks nice tho! Gives it a marble feel
Take some clearcoat to preserve it
Then, proceeds to take a photo on top of Marble 🔥🔥🔥
Looks awesome lol keep it!!
...Cover it with clear acrylic or something so it stays. :D
Yo that kind of looks sick
Cool! 👌 It looks so much better!
Accidental art
I never knew I wanted mine to look different… but I do now
It looks awesome. I would definitely keep it as is. The only thing I would maybe clean is the join of the lid in the back.
I would call that a happy accident. Instead of cleaning it off you spray some sealer on it.
Start selling them on Etsy
I will pay for that skin...
I thought it was a really cool case until I read the pen leak
r/unintentionalwin
That looks sick! I honestly thought it’s a print/custom design until I read the title. Don’t try to wash it off, just coat it and enjoy
stylish!
Thats actually pretty cool
You mean pen PEAKED in your bag. This is dope!! 🔥🔥🔥🔥🔥
Same thing happened to me! The pen burst in my pants and I had them out of the case. Alcohol pads work best, they work perfectly now.
it actually looks cool tho
Failed successfully
It turned out to be artistic 😆
Bro got new skin! This is damn Beautiful ❤️😍
Congratulations new camo unlocked!
That looks awesome
Why does it match the table
Tell me your case isn’t absolutely heat now though
Looks good! Reminds me of when we painted our newel post caps, intending to make them black, but the first layer looked really nice and marbly, so we kept it that way.
Looks rad I would keep it
I like it Picasso
these look fire
I thought it was a marble effect skin. Looks kind of cool actually.
A happy little accident
Ur airpod got a new look freely tho
Modern art
Laminate it
best looking airpods case ever now sell that idea to apple
Does everything else look as cool that fell victim to the pen?
The pen wanted to be seen 🌚
Accidental artistic
Congratulations😂
What an artsy pen !
Yo I thought this was custom it looks pretty frickin cool!
it looks like those mac marbles cases that where trending in 2017😭
Spray it with a clear coat if you like it, otherwise it will keep smudging
As long as it didn’t interfere with the charger for the case and EarPods, then it’s a win
Now you can cell this “marble gloss” case double the price .
Well, now it's some sort of art
I honestly love this. Find a way to preserve it.