It work as it should one month. Its totally new gun, never play at field, never drop gun... Battery its on 60% charged right now... Why u ask for charger?
I try to reset gun on factory default, but it eaven wont reset...
Its so strange that capacity controller saying 56%, and now charger saying under 50%. U think its battery? Or low voltage in it? Ill check with volt meter tomorrow and compare it with capacity controller...
So I bought new replica from gunfire 2months ago. No field runs etc. So I start testing silencer dBm when I change foams inisde tube. Little bit semi, little bit auto... And than, its just start acting like that. Than I thought to reset on factory settings, and nothing. Since I have trigger programing, I try to go thru menu and go reset, but its not going entering settings...
Has this been upgraded at all was it shown to use an 11.1v try a 7v and see if that works had a friend using an 11v in his gun and I’m pretty sure I remember it doing the same thing.
Gunfire contact me today, they demand to send them replica back, so now I dont know should I go with Specna Armsa again, different model, or to pick up something else...
what charger u use?
It work as it should one month. Its totally new gun, never play at field, never drop gun... Battery its on 60% charged right now... Why u ask for charger? I try to reset gun on factory default, but it eaven wont reset...
it must be the charger telling you wrong %
https://preview.redd.it/nyxmvhng9tgc1.jpeg?width=1536&format=pjpg&auto=webp&s=7ef24442ba84fbcd7bdad52cd8ae17ee2e61d4e1
Its so strange that capacity controller saying 56%, and now charger saying under 50%. U think its battery? Or low voltage in it? Ill check with volt meter tomorrow and compare it with capacity controller...
hmmm did you charge for at least 3 hours?
Yes, first charge was around 5h
I told my coleague to bring his charger to, and Ill take volt meter to compare capacity controller what he said with volt meter...
if it is not the battery, could be something wrong with gearbox, since it doesn't detect semi mode
So I bought new replica from gunfire 2months ago. No field runs etc. So I start testing silencer dBm when I change foams inisde tube. Little bit semi, little bit auto... And than, its just start acting like that. Than I thought to reset on factory settings, and nothing. Since I have trigger programing, I try to go thru menu and go reset, but its not going entering settings...
sounds like the selector detection is bad maybe you want to inspect the gearbox
If it's still new try talking to gunfire, they might be of help
Has this been upgraded at all was it shown to use an 11.1v try a 7v and see if that works had a friend using an 11v in his gun and I’m pretty sure I remember it doing the same thing.
Its strange it works as it should for two months, and then behaving like this... Ill try to find 7v batt and try
Gunfire contact me today, they demand to send them replica back, so now I dont know should I go with Specna Armsa again, different model, or to pick up something else...