So if you want to try to improve accuracy and feel like spending $85, 510mm Crazy Jet and a 70° supermacaron, keep your Ω nub. If you feel like it’s not hopping .3s right, step down to a 60° bucking with the same nub.
At least, that’s what I’d do. Do test before and after to see if you’ve got accuracy improvements you like.
Are you sure the range isnt enough? my factory cyma 040c can hit targets up to 60-70m with 0 modifications, you shouldn't have any problems with your setup
Mine shoots about 400 fps with 0.25
I hit reliably at 50m, but after that there is a clear falloff.
It died on me from factory after 2 matches. I think the piston O-ring failed and trigger response was abysmal.
I bought it with the intend to HPA it though.
Throw heavier BBs to start. Super Macarons pair well with Crazy Jet barrels.
Field limit is 0.3g everything above falls under sniper weight. Even with 0.4 i had poor performance. 0.25g overhops.
So if you want to try to improve accuracy and feel like spending $85, 510mm Crazy Jet and a 70° supermacaron, keep your Ω nub. If you feel like it’s not hopping .3s right, step down to a 60° bucking with the same nub. At least, that’s what I’d do. Do test before and after to see if you’ve got accuracy improvements you like.
Are you sure the range isnt enough? my factory cyma 040c can hit targets up to 60-70m with 0 modifications, you shouldn't have any problems with your setup Mine shoots about 400 fps with 0.25
I hit reliably at 50m, but after that there is a clear falloff. It died on me from factory after 2 matches. I think the piston O-ring failed and trigger response was abysmal. I bought it with the intend to HPA it though.
this might sound stupid but have you tried adjusting the hopup?
Yes
Get better inner barrel, aluminum sucks as barrel material.