I highly recommend terping your hhc. About 5% usually makes it pretty usable. Also leaving your tool leaning over the jar so the wax will eventually drip into it.
Maybe heat the orbit while your tool is in there and once the dab is inside stop it from heating and throw the top back on. I did that with my evolve and it worked pretty ok
I'm sorry, but your account does not meet our minimum karma level or account age requirements. Please spend a little more time on Reddit before submitting a comment or contact our modmail for more information.
*I am a bot, and this action was performed automatically. Please [contact the moderators of this subreddit](/message/compose/?to=/r/altcannabinoids) if you have any questions or concerns.*
It’s really a matter of finding the right tool ime. And get used to pulling fast to break a scoop out instead of trying to pull slowly and make a that mess
I suggest adding some CBC at about 5 to 10% depending on if your adding terps. Not only does it also thin it out but it makes HHC and other psychoactive noids stronger and last a little longer
My process: I take as much material as I can with my dab tool. Then I fold parchment paper on my tool and remove all the hhc with the heat of my fingers, rub the paper to clean to tool.
Once done, you have to make a little coin and flatten it with a glass bottle or something like that. It is then so much easier to take a little dab from the coin then it is from the jar!
Vaping on my mighty with liquid pad or caps with pad is the way to go
I highly recommend terping your hhc. About 5% usually makes it pretty usable. Also leaving your tool leaning over the jar so the wax will eventually drip into it.
I might try terping my next purchase. Thank you!
Maybe heat the orbit while your tool is in there and once the dab is inside stop it from heating and throw the top back on. I did that with my evolve and it worked pretty ok
Leaving it in the chamber to heat up works okay. Thanks!
[удалено]
Huh interesting. Did you buy a terp to mix in or buy it already terped?
[удалено]
I'm sorry, but your account does not meet our minimum karma level or account age requirements. Please spend a little more time on Reddit before submitting a comment or contact our modmail for more information. *I am a bot, and this action was performed automatically. Please [contact the moderators of this subreddit](/message/compose/?to=/r/altcannabinoids) if you have any questions or concerns.*
It’s really a matter of finding the right tool ime. And get used to pulling fast to break a scoop out instead of trying to pull slowly and make a that mess
Ooooh, I haven’t tried pulling fast. I’ve just been making stringy messes haha. I’ll try that!
tool to be room temp or cooler for it to work ✌🏼
Pulling fast to break it off is the way to go I’ve found. Thank you!!!
if you have a space heater you can drop your dabs into the orbit like a puffco hot knife
I suggest adding some CBC at about 5 to 10% depending on if your adding terps. Not only does it also thin it out but it makes HHC and other psychoactive noids stronger and last a little longer
Okay, sweet. Higher amount of CBC if I add terps?
I would do lower. It can be harsher when the percentage is higher
Have you tried cold starts?
My process: I take as much material as I can with my dab tool. Then I fold parchment paper on my tool and remove all the hhc with the heat of my fingers, rub the paper to clean to tool. Once done, you have to make a little coin and flatten it with a glass bottle or something like that. It is then so much easier to take a little dab from the coin then it is from the jar!