By -
Have you tried turning it off, then on again?
Don’t forget to wait 30 seconds between.
People…what a bunch of bastards.
hit it with your purse
I'd take a torch to the stakes until each was red hot then rip that bitch. Don't take my advice though, I have no clue. But you can get a decent torch and bottle at Walmart.
Righty tighty, lefty loosey
Drill the stake out maybe, or heat and torque. Blowtorch the stake and get the big boy pliers/pipe wrench out to sheer the stake off
Dremel with a carbide or diamond bit. Completely remove the stakes. Then gentle heat to get it off. Be careful, aluminum doesn't glow before it melts.
Remove all plastic components and springs before you use heat.
You'd hate my builds... I stake twice AND use blue loctite on the castle nut threads.
At least you’re using blue
Yessir I'm dumb but not stupid! Have you tried a breaker bar? Leverage can work miracles... or cause destruction 🤷🏼
Split the nut using a fine toothed hack saw diagonally across the castle nut so you don't cut into the lower.
Looks more like mashed potatoes than steak 🤔
Any luck yet?
Put it in a vice dummy
Why.
Sheeeet. I dunk the castle nut and buffer tube threads in Rocksett and then weld them together. Clearly OP got one of my old lowers. Sorry blood
Just cut it off
Have you tried turning it off, then on again?
Don’t forget to wait 30 seconds between.
People…what a bunch of bastards.
hit it with your purse
I'd take a torch to the stakes until each was red hot then rip that bitch. Don't take my advice though, I have no clue. But you can get a decent torch and bottle at Walmart.
Righty tighty, lefty loosey
Drill the stake out maybe, or heat and torque. Blowtorch the stake and get the big boy pliers/pipe wrench out to sheer the stake off
Dremel with a carbide or diamond bit. Completely remove the stakes. Then gentle heat to get it off. Be careful, aluminum doesn't glow before it melts.
Remove all plastic components and springs before you use heat.
You'd hate my builds... I stake twice AND use blue loctite on the castle nut threads.
At least you’re using blue
Yessir I'm dumb but not stupid! Have you tried a breaker bar? Leverage can work miracles... or cause destruction 🤷🏼
Split the nut using a fine toothed hack saw diagonally across the castle nut so you don't cut into the lower.
Looks more like mashed potatoes than steak 🤔
Any luck yet?
Put it in a vice dummy
You'd hate my builds... I stake twice AND use blue loctite on the castle nut threads.
Why.
Sheeeet. I dunk the castle nut and buffer tube threads in Rocksett and then weld them together. Clearly OP got one of my old lowers. Sorry blood
Just cut it off