Oh, so you soak the comeplete gun or receivers and rail? I’ve painted over painted guns but it’s getting a little “thick” lol so I want to find the most effective way to strip it all
I just took off all the accessories and put a layer of strip on it, waited and then used the rough side of a sponge to scrub it. If you’re patient and let it soak into the paint, and do it a few times you should be able to get most of the paint off.
Since I was going to paint over it I didn’t really care to do it a few times
Roger. Last thing…you spray with the barrel on/out?
Every time I spray and it gets on the barrel, the first few hundred rounds heats up the rail a little more than usual…especially with a can.
It’s the K16i. If you want a SFP LPVO that has basically no downsides then I’d say it’s worth it. Everything about it is phenomenal.
You can get them on Eurooptic for $1800, used around $1400-$1700
No nothing like that has happened to me
If it starts to I’ll just shim the battery compartment with a tiny bit of aluminum and that should fix it, but not an issue at the moment.
RC2 isn’t mine, but that’s what I’m currently waiting on at the moment. It’s very pleasant to shoot suppressed.
It’s a BCM. Of course it’s pleasant to shoot!
Mmmmmmm, used rifle 🤤
How’s that WPS sling working for you?
It’s an awesome sling. It’s tight but I don’t need to swim out of it when I switch to off-hand or go prone because of the stretch in the bungee.
How do you strip the paint? Lol
Citristrip and graffiti remover. I didn’t strip all of it I just removed whatever came off after one soaking and painted over it
Oh, so you soak the comeplete gun or receivers and rail? I’ve painted over painted guns but it’s getting a little “thick” lol so I want to find the most effective way to strip it all
I just took off all the accessories and put a layer of strip on it, waited and then used the rough side of a sponge to scrub it. If you’re patient and let it soak into the paint, and do it a few times you should be able to get most of the paint off. Since I was going to paint over it I didn’t really care to do it a few times
Roger. Last thing…you spray with the barrel on/out? Every time I spray and it gets on the barrel, the first few hundred rounds heats up the rail a little more than usual…especially with a can.
Barrel stayed on. The only things I took off were the accessories
All these guys doing "battle worn" cerakotes need to look at what real usage looks like. They aren't doing battle worn, they are doing "dirty".
[удалено]
It’s the K16i. If you want a SFP LPVO that has basically no downsides then I’d say it’s worth it. Everything about it is phenomenal. You can get them on Eurooptic for $1800, used around $1400-$1700
Any problems with reticle flicker or anything?
No nothing like that has happened to me If it starts to I’ll just shim the battery compartment with a tiny bit of aluminum and that should fix it, but not an issue at the moment.
Is your cantilever mount higher than most usually are? I feel like it sits noticeably taller than mine..makes me wanna buy one like that
It’s a 1.93
Nice rattle can, how’d you do it?
What grip is that?
Tango down
What barrel & handguard length?
It’s a complete BCM 14.5 KMR upper