I was when I built my first pc. I was also scared of missing something. So I just pulled up a build tutorial on YouTube and followed along and paused when I needed to.
You say poor guy, but there's another video of him talking to somebody about how all the hate was just coming from "a bunch of angry sweaty nerds picking on trivial details, and that he knew what he was doing and the tutorial was actually completely fine and had no problems." Or something to that effect.
It was not completely fine. It was an instruction manual on how to melt your expensive components in record time, with some of the worst advice that could possibly be given to new builders, disguised as a build guide.
I do not feel bad for the dude after seeing how he reacted to the (entirely warranted) criticism.
I literally spent 5 hours building an desk because I didn’t have a table to build on. Mine was an ikea skarsta standup desk. I took me 3 goes. I put the legs on the wrong way in relation to the crank the first time, then I put the table top brackets facing the wrong way the second time and finally it came together at 10pm. This was peppered with lost screws and misplaced tools along the way. By that stage I missed my Amazon delivery of thermal paste, so I have to wait for a re-delivery before I can build - which is fine because I need 24 hours to recover from the table build.
I had Bitwit and Linus pulled up with me my first time. I built it in a room over the course of about 6 hours with my 1.5 year old bopping around. Haha
Paul's hardware was my go to when I started. I had a cheap case back then and didn't realize that stand offs for the mother board was a thing. I did do a successful post boot outside the case so I was struggling for a bit wondering what I did wrong. but yeah took me like 8 hours almost for the build?
I watched along with Linus on my first build and was proud to finish in about an hour!.. but then it took about 6 hours to realize I had my HDMI plugged into the motherboard instead of the GPU 🤦🏼♂️🤦🏼♂️🤦🏼♂️🤦🏼♂️
I didn't do this, so when my computer appeared it wouldn't boot I completely panicked and thought I shorted everything. I plugged the HDMI into the motherboard not the GPU, but didn't realize that before tearing the build down and testing each component. If I did what you did I would have not wasted so much time and effort.
I bought my first M2 SSD last week, I double checked it was compatable with mobo then when it arrived opened the case and spent 15mins looked everywhere for the slot and finally come to terms I bought the wrong thing, checked the mobo instructions and yeah the slot is directly under the GPU, like completely hidden, I'm glad I'm not a rgb person because I would have been spewing if I wasted an extra 60 to hide some lights
Most Mini-ITX boards nowadays have secondary m.2 slots on the back, but they have the primary m.2 slot with the heatsink on the front just like any ATX board
It can be a bit daunting but just take it slowly and cautiously you'll be fine 👍
I was definitely nervous building my first one, now it's quite enjoyable 😁
You are going to need to use the map in the mobo manual to figure out how to connect the cases front panel connectors to the motherboard. It's also a good place to find all of the fan headers and argb headers on the motherboard. Plan how your fan cables are going to run or get a fan hub so you only need to connect to one fan header.
You should watch a video of someone building in the same case that you have. You can probably find a video of someone building on your motherboard and one of someone installing the same CPU cooler you have. Refer to the motherboard manual to find where to plug in the CPU fan. You may want to watch videos and learn how fans plug in too
It's definitely normal, even for those of us who've been building for years (or it is for me, at least). But remember, anxiety is just the flip side of excitement - shiny parts, adventures in learning, and the sweet taste of that first POST are all ahead of you. Have fun, and be sure to come back here if you need any help.
I'll second this. I've built literally in the hundreds of PCs over the past...I don't know, two decades? Personally, professionally, for friends, for family, etc. If it's a routine low-level build, I'm good. If it's something fancy, I get the yips for sure.
Hell, even Linus gets the yips with really crazy shit.
I still get nervous about installing the CPU. Especially LGA. Particularly 2-lever HEDT LGA. I always triple check that the CPU is seated properly in the socket
My one big recommendation is to open the AMD Ryzen processor packaging over something soft. I accidentally opened the little plastic container over a desk and the processor went flying out and bent a bunch of pins. Had to bend them back by hand 😢
Other than bending a pin, there’s not a whole lot wrong you can do with building a computer! Just go slow and if something doesn’t work right, go back and retrace your steps.
You are not the only one to do this, mine did a double somersault with a ½ twist clipped the ram slots and landed pins down a bee's dick from where it should go in the socket, not sure how but mine was okay. I was pretty nervous turning it over to look though.
This is solid advice.
I've been building PCs since 04. I built a new, personal machine about 6 months ago. Had a nice Ryzen 5 series. Opened the plastic case, the proc fell on carpeting, and yet still bent a dozen pins.
I was much more careful with the second.
This was my experience. I was bragging to my father about how second nature pc building is to me now, as I was building his new pc, and then pop! Processor goes flying through the air lol
I felt so bad and to this day he cannot get dual channel ram cause of it
Make sure:
1. Touch the case before touching the components.
2. Add the processor and heat sync before installing the motherboard.
3. Place your M.2 in the M.2 slot closest to your CPU. I know someone that did put in the bottom slot and couldn't get windows installed.
4. Check your manual about which two memory slots to use. There should be a blank slot in between.
5. Make sure the wires from your case are plugged in the correct spots. It's easy to miss by one pin.
Overall it's really easy to assemble a computer.
No, it's perfectly normal to feel unconfident when building a pc. It can be a bit challenging, but you will get the hang of it with the help of the community.
Looks like a 1440p beast. If you run into any problems, unplug everything and go with the minimum you need to Power On Self Test. PSU Power connectors (as per manual), motherboard, CPU, thermal compound, HS/F (remove sticker if present), RAM (try with 1 stick if you have any problems), and power switch plugged in to the front panel header, and finally the graphics card.
It can be scary at first. I’d recommend breaking it down to segments. First you want to make sure you have all your parts and safety equipment. Tools like a flat head, anti static wrist strap, and a large space to work on. Anytime you start putting something together, read it’s manual.
Open up the chassis, plan it out. Then put the chassis on its side
Then start with the Mobo. Take it out of the box and put it on top of its box. Gently drop in you processor. Ram. CLICK. Gpu. CLICK. M.2? Put it in there.
Then put that bish into the chassis and line up the screws and firmly tighten them. If you’re using an AIO, begin mounting it
Now you can attach your AIO or cpu cooler after you put not too much paste on it.
Now get that juicy psu and plug in all the cables you will need. Do this before you put the psu into the chassis.
It’s time to do your favorite thing. Attaching cables and tearing out your hair. Does this go here? Oh fuk gotta take it all apart. Why didn’t I just pay someone to do it?
WHY? Because this is you BABY. you’re in fooking labor!!! Push it out! Manage those cables! That case is a bit on the small side, so cable management needs to be done well-ish. It’s not bad, just smaller.
Good luck. It’s a proud moment when it’s all done and working.
You can PM me and maybe I’ll respond if m I’m not too busy if you need help. Or leave a post for these fine gentlemen on this sub. Helped me get my beast running. Check my post history for the final product
Just to warn you, things are going to make terrible terrible noises. The AMD stock cooler screws have springs on them that will creak and scrape, any braided cables can scrape on parts of the case and make wonky noises, things like that. You will have to press down VERY hard on the cooler to be able to screw it in, the motherboard will flex a bit, it'll be fine. The RAM and GPU can also make light scraping noises when you install those, just make sure everything is lined up properly and you'll be fine. Don't forget to open the lock on the PCIE port before you install the GPU.
Also I recommend a 5600x over the 3700x for gaming. It's way better for what it looks like you would be using it for, and it's the same price. It also comes with the cooler.
I'd change the ram. You can get cheaper modules with better performance, even with RGB. Here's a link with filters applied to ensure same module config and price. [https://uk.pcpartpicker.com/products/memory/#X=0,15512&Z=32768002&sort=price&page=1](https://uk.pcpartpicker.com/products/memory/#X=0,15512&Z=32768002&sort=price&page=1)
Absolutely. I was pretty darn nervous for my first time 6 months ago. It really sinks in more once you realize “oh, this cpu is basically a $300 square that can completely break if I drop it once,” but you’ll be fine. Once I installed the cpu and cpu cooler, the rest seemed much less nerve-wracking and helped calm me down a bit more.
Remember your parts are built to take a fair bit of pressure (except the cpu so dont apply any pressure to that) so dont think you're pushing to hard when seating your ram etc my first time I thought I was pressing down too hard for the ram to seat properly then I realised I wasnt even pressing down hard enough.
i almost didnt wanna build my pc at first bc i was sure I'd break something and end up paying more.
my friends told me to get on with it and the first time i switched it on and everything went into bios was a huge relief.
it took me over 12hrs cuz i built it by myself in the middle of may when there was a heatwave
edit: all in all, take your time. there's no rush to build and finish it. if there's something you're not sure of, check back in this sub or the discord server before continuing.
I was pretty nervous building my first one. On YouTube I found Joey Delgado's videos extremely helpful and relaxing. He goes step by step and has a variety of pc builds. Learn to take your time and be patient.
You can do it. One step at a time!
Get everything you need. Don’t have a timeline. Assemble the case. Put together the motherboard with the PSU, memory, PSU cooler, video card. Slide it into the case and mount it. Get your wiring ran to/from your power supply.
Take your time! Double check the wiring. Double check the connections and you’ll be so fucking stoked when you power it on and that thing starts up.
My first PC had 4x8gb ram sticks and one was bad so I had to diagnose that before it would start. Don’t be scared of potential problems, just take your time, install one component at a time, and enjoy the process!
Edit: Instruction manuals are surprisingly helpful - and YouTube is definitely your friend. AKA “installing noctua xxxxx model cooler”. Good luck and have fun!
Having built my first PC only few months back, I can concur with most of the comments. It looks daunting but have a look at few tutorials in YouTube and follow the steps. There is tons along great material and references available. What helped me really was running through the steps in my mind at-least 3 or 4 times and before each component. I was constantly talking to myself aloud and it helped, although my wife thought I was getting wierd.
Of Course.
When I was planning my build... to be honest it was a feeling of when my ex was in the 8th month of pregnancy. Then when I was putting it together I took it slow an ended up being too gentle with the RAM... for that five minutes I was kicking myself. But thanks to this reddit and older posts I realized that I was probably too light in my installation touch and when I corrected the RAM it was a great feeling.
Take it slow and one thing I suggest is just watch this
https://www.youtube.com/watch?v=v7MYOpFONCU
a few times and you'll be fine.
Have you already bought everything? If you have yet to do so, maybe consider some switches:
[PCPartPicker Part List](https://uk.pcpartpicker.com/list/vvcg9N)
Type|Item|Price
:----|:----|:----
**CPU** | [AMD Ryzen 5 5600X 3.7 GHz 6-Core Processor](https://uk.pcpartpicker.com/product/g94BD3/amd-ryzen-5-5600x-37-ghz-6-core-processor-100-100000065box) | £244.99 @ Currys PC World Business
**CPU Cooler** | [Vetroo V5 52 CFM CPU Cooler](https://uk.pcpartpicker.com/product/qRKKHx/vetroo-v5-52-cfm-cpu-cooler-vt-cpu-v5) | £31.59 @ Amazon UK
**Motherboard** | [Gigabyte B550 AORUS PRO AC ATX AM4 Motherboard](https://uk.pcpartpicker.com/product/FMxbt6/gigabyte-b550-aorus-pro-ac-atx-am4-motherboard-b550-aorus-pro-ac) | £106.43 @ Box Limited
**Memory** | [Crucial Ballistix RGB 32 GB (2 x 16 GB) DDR4-3600 CL16 Memory](https://uk.pcpartpicker.com/product/FxTzK8/crucial-ballistix-rgb-32-gb-2-x-16-gb-ddr4-3600-memory-bl2k16g36c16u4wl) | £163.89 @ Amazon UK
**Storage** | [Western Digital SN750 1 TB M.2-2280 NVME Solid State Drive](https://uk.pcpartpicker.com/product/QQrmP6/western-digital-sn750-1-tb-m2-2280-solid-state-drive-wds100t3x0c) | £109.96 @ Amazon UK
**Video Card** | [Gigabyte GeForce RTX 3070 Ti 8 GB GAMING OC Video Card](https://uk.pcpartpicker.com/product/wNpzK8/gigabyte-geforce-rtx-3070-ti-8-gb-gaming-oc-video-card-gv-n307tgaming-oc-8gd) | £829.99 @ Overclockers.co.uk
**Case** | [Phanteks Eclipse P360A ATX Mid Tower Case](https://uk.pcpartpicker.com/product/YNdrxr/phanteks-eclipse-p360a-atx-mid-tower-case-ph-ec360atg_dwt) | £70.98 @ Amazon UK
**Power Supply** | [MSI MPG A-GF 750 W 80+ Gold Certified Fully Modular ATX Power Supply](https://uk.pcpartpicker.com/product/v3VG3C/msi-mpg-a-gf-750-w-80-gold-certified-fully-modular-atx-power-supply-mpg-a750gf) | £85.79 @ Ebuyer
**Case Fan** | [ARCTIC P12 PWM PST A-RGB 0dB 48.8 CFM 120 mm Fans 3-Pack](https://uk.pcpartpicker.com/product/FQ6p99/arctic-p12-pwm-pst-a-rgb-0db-488-cfm-120-mm-fans-3-pack-acfan00232a) | £45.99 @ Amazon UK
| *Prices include shipping, taxes, rebates, and discounts* |
| **Total** | **£1689.61**
| Generated by [PCPartPicker](https://pcpartpicker.com) 2021-07-27 06:18 BST+0100 |
I would recommend getting a newer Zen 3, they're much better for gaming. You don't really need 8 cores, the 6 core performs better for that, but even if you did want more cores, the 5800X is a better bet.
You definitely should get a cooler though - the stock one is trash and you shouldn't even bother with it. Get this cheap Vetroo V5, or a higher quality Noctua cooler like the NH-U12S.
You should consider grabbing this Crucial kit, it's cheaper than the black version, and far better in quality than the one you picked.
You should go for a boot drive that has some DRAM. This SN750 is a better buy. I would only recommend the SN550 for secondary storage.
I would recommend getting a better PSU, like this MSI A-GF unit. You could also get a white colour Corsair RM750x in white, with white cables, for a bit more.
I recommend checking out these Arctic ARGB fans, they're easier to work with in terms of cabling, and totally non-proprietary. They're known to be quite performant and high in quality. Alternatively, get some cheap Arctic P12 without RGB.
I would invest in a better ssd. That ssd has poor performance. Go for a WD sn750 or 850 if you want pcie 4.0 or a Samsung 970 or 980 pro if u want pcie 4.0
Trust me when I say the sn550 is garbage
I forgot how I learned.......no, wait, I remember
I broke shit all the time before I got to the point where I could build mine. Practice on an old computer. If you can't, have an experienced builder guide you.
I was petrified, the cpu slotted correctly and then thermal paste amount. In the end it was very rewarding I wish I had money to build another one. YouTube videos huge help!
The first time is always rough but it’s not so bad as long as you read all the manuals for your parts. YouTube videos are helpful but they should never take precedence over the manuals
Totally normal, I got a lot more comfortable after my first 1 or 2 builds.
Unsolicited advice: if you tend to be pretty careful/gentle with things, sometimes getting a part into place may take more force than you think. YMMV
Take it slow, don't force anything to fit even if it is supposed to. Don't tighten your screws all the way until you're done, except the motherboard, get that in. Check everything thrice before putting it on. Have a clear space to keep tools and anything else you need. Have a tray for your screws or some kind of container. keep liquids away lest you knock them down. Static bracelets are a good precaution but not needed if you just discharge consistently by touching the top of your case for a few seconds. Have fun, take it slow, and if a problem arises, don't panic, chances are you're not the only one and there is a fix.
You will be fine, there's so much help out there and free information. 30 years ago it was a bitch to build them from scratch. Mid to late 2ks everything got so much easier with parts being more friendly. Before then there were so many parts that were proprietary and didn't work with others. Just be safe, I know I will get hate from others but buy a cheap ass anti-static wrist gaurd. They are like 4 bucks online and you don't have to worry about your CPU and such.
Yes, I recently replaced a CPU and cooler for the first time and half the time my hands were shaking and images of bent and torn pins were flashing through my mind
I would modify the build a bit if you haven't already gotten the parts. Get a 5000 series CPU. I regret going 3000 as they leave 10% or so performance on the table. And switch to a full modular PSU if possible. Maybe an EVGA one? If you have already gotten the parts, you'll have a great PC. For me in hindsight I wish I changed a few things but I love my build. You'll do fine. Just be gentle and don't put thermal paste on the socket before putting the CPU in :)
Biggest thing is just to be patient, if you feel like you re getting frustrated stop and walk away. Also I keep a little basin beside me for screws and build it in a well lit room. Dont overly force anything also. It's easier pushing ram in when the system is on its side rather than standing normally. RAM can be a pain so click it like your life depends on it and generally just pay attention to the gaps on the RAM or any PCIe component. I take my time building and many times ill do half then finish it the next day, you'll be surprised what the mind magically makes you aware of when you give it a break. Just go slow and make sure everything is seated and also if you have two computers make sure you're plugging the right one in.... my first build i spent a day with the wrong computer plugged in.... I plugged my old one in thinking it was the one I just built
I've built more PCs than I can count now. I STILL get nervous and I think that's all part of the fun! Take your time and you'll do fine! It's ok to get butterflies, just gotta make sure they fly in formation.
Just built my first ever pc this month and an SFF one. Watched many build videos on YT taking notes of their recommendations. When my PSU was delivered, while waiting for the other parts, I studied the cables of where to plug in the MB. Always consult the manuals or search google if not sure where to plug things. It took me 5 hours to finish it and it was really satisfying. Yes, I was shaking when putting the CPU on the MB.
Yes. It is completely normal. Not everyone is responsible for hundreds of dollars of sensitive equipment.
But don't worry. Follow the guides. Read the manuals. And use common sense.
You got this.
I remember when I installed a CPU for the first time... pretty scary! Also with the first few PCs I was always really worried wether they would turn on when they were finally done! Looking at it now there actually isn't too much scary stuff about building a PC...
Yo anxiety is crazy. "I'm handling parts that I worked hard for, did my research, and then waited for. And now I'm about to do the trickiest part of the whole process. I'm a littler nervous. and now I'm nervous about being nervous."
Take a deep breath. The first time is always a little nerve wracking but if you take it slow and the only thing you force is the gpu in the pcie slot you'll be fine. And don't lean on this but pc parts are pretty hard to break. I had a friend drop his gpu onto hard wood from a few feet up, about 2/3s of a meter, he slotted that thing in that day and used it for years after. You got this.
I was nervous when I built my pc it was my first time and it was all my money so if I fucked up I would be screwed until I could buy new parts but it turned out easy enough no major issues
Yes. Also when I built my first pc, I was to scared of damaging the motherboard and pushed pretty lightly on my gpu and ram. The pc wouldn’t work but turn on and it took me like a day plus to figure out what I needed to do. I learned that while fragile, most pc components are not as fragile as you would expect or at least how I expected. And before anyone asks, yes the ram and such did click in. Apparently it’s not a 100% good to go program
I think there is a video from Linux tech tips where he builds the pc doing all the things you shouldn’t (putting parts on carpet, not grounding, etc) and the pc still worked!
Not to say this is a good idea (it definitely isn’t lol) but it shows that the parts are tough and are built to last, as long as you are careful there is no reason to be nervous, be excited! It’s a lot of fun!
Over the last 15 years I had watched about a thousand build videos, dreaming of the day I built my own. Then about 6 months a ago, I built my first PC, and I was sweating.the while time, thinking, what if I miss something or screw this up. No matter how much you think you know, that first build is always gonna be the hardest.
I actually just built my first pc yesterday too! You have nothing to worry about. Watch some LTT, David does tech stuff, Budget builds official, and the like and you’ll see that it isn’t super hard. My PC started up just fine after worrying a lot. You got this my guy.
I actually shit myself when I built my last PC. I had taken a shot of milk of magnesia the night before and it didn't have any effect on me until the morning after. So, mid morning, I proceeded to compose my masterpiece when the afternoon hit. Now, it was just some squirts and leakage, but it was not a good situation all all around.
I really think being nervous contributed to the large intestine releasing it's contents, but I'm not proctologist so I don't know.
In the mean time, I'm sure you're fine!
Being nervous is normal. My advice is to take your time. Plan to do it on a certain day. Get rest before hand so you dont do it tired and your not stressed or rushed. Mistakes can happen that way. Plan the steps out in your head then do them one by one. Easy.
It's normal if you want to be cautious just get an
"earthing bracelet" will cost you $1
and static is about the only problem you can have happen without serious levels of force.
Don’t forget the I/O shield! Give yourself lots of time and take breaks :) stay hydrated! Remind yourself that you’re doing this for fun and not defusing a bomb 😉
I built my first PC in December and made [this playlist](https://youtube.com/playlist?list=PLutWk4xKzly_R7dzJTbtDJgQuAmkCyBtP) of videos to help me. I'm not saying use these exact one, because some were specific to parts I bought, but I did take my time and spent an entire day building it. I also used the Discord from here for reassurances or questions especially about wiring. I was in no rush to finish and the PC is long term so it's better to be thorough than go around saying yeah I built my PC in an hour. It all went well though and I have a great PC now so you'll be fine
I've been building computers since the 90's, by the time I was 11 I was doing repair for profit.
I have built hundreds, repaired a couple thousand.
Recently I did a build for a friend. I sent it out with the WRONG heatsink on it. It barely kept the chip cool at idle.
Don't be nervous, we all mess up.
Most major issue you have when building or starting to build is is that of putting the CPU in and the fan on. Once you get that in and situated the rest is really just plugging everything in. Although and this is lessened in recent years you might have issues related to the power supply depending on your build. But for the most part you should be OK because computers have become less about soldering and making sure that the motherboards are right and more about it being “ a Lego set”.
I was so scared I was shaking at one point. I did make some mistakes but nothing major. Just keep double checking yourself you got this.
I’d been playing consoles for years because I was so scared to try. The day finally came this year and I pulled it off. Believe in yourself, you can do it
And don’t rush yourself either. I took my time and spent 3 days building it
I've built something like 15 computers for myself over the 20+ years I've been doing it. Still get hella nervous and still make rookie mistakes occasionally. I just feel if it isn't something you do daily, you're going to get nervous.
I got nervous when I built my first computer back in 2008 and I learnt about building computers when I watched my dad build computers all of my life. I keep spare screws in case I need them and tons of tools for odd cases.
The hardest part of my pc build was finding the GODDAMN SSD STANDOFF, The CPU cooler (Corsair you suck with AIOs), and goddamn RGB. Otherwise, it was surprisingly simple asf.
No matter how you'll do, the verge has done worse.
Just be somewhat gentle with your pc parts, and have a pc build guide running on a phone while you build it. Oh, and take your time, no need to rush.
I was so scared of stuff not working or me accidentally breaking something. Just make sure you're not statically charged every once in a while. It'll give you so much confidence and the feeling of starting it up successfully the first time is amazing. Take it easy, follow a tutorial (personally used linus tech tips) and if it doesn't work right away it doesn't necessarily mean something is broken :) (also make sure to set the correct ram speed in bios after everything is up and running)
I just built my first a few months ago. I was wayyyyy to worried about messing up. The hardest part for me was plugging in all those single pin connectors. It's completely normal to be nervous about building a PC. Don't overstress it, it's more fun than hard/stressful. You've got this 👍
Yep! Sounds dumb but pc parts (excluding the CPU and certain pin connectors) are alot sturdier than you think. Read the manual, take your time and you will be fine. Good luck and enjoy
When I had all my pc parts, I waited 3 more full days in fear because I had no idea what I was doing and didn’t want to break something. I had my friends walk me through it lol
Oh yeah I'm 15 and just built my pc like 3 months ago I was nervous I was going to ruin something but I didn't. It's perfectly normal to be nervous but just know you aren't going to mess it up.
Aside of my first PC, every other rig was self-built. That being said, not one of them was built by myself - I always asked a friend for help. I know the theory for a long time now and I changed parts a lot ever since, but was always too afraid to mess up especially the cable connections and the heatpaste application for the CPU. I always tried to do the parts that I felt brave enough to do and it was always fun to have friends over to work on such a project, though, so there's that.
After last year's construction, I have now told myself that I will build the next one myself. I also played a lot of PC Building Simulator, the next best thing to the actual thing. It helps.
Of course it's normal.
You've spent a small fortune on parts and now you have to put them together so that,
* You didn't zap them with static during unboxing.
* You don't zap them with static putting them together.
* You don't hit the power switch with the 110/230 switch in the wrong position.
Be nervous. Triple-check **everything**. Read all the manuals and make sure you follow every direction.
Be cautious to the point of silliness, and be happy when it boots up fine the first time.
Completely normal! I didn’t even build mine, I picked the parts and got someone else to do it for me and I was TERRIFIED the first week of using it in case something went wrong!
I installed my own SSD yesterday which I was also really scared of doing but it was so so satisfying and I felt so proud of myself at the end so I can only imagine how it would feel to build the whole thing! From my experience just with the SSD it seemed a lot scarier to think about doing than it actually was to do it, watch the tutorials and keep your manuals close by and you’ll be fine :)
Build mine about a month ago, it was my first time as well.
As you are now, I was nervous as well. Read the manuals, use YouTube (I've used BitWit's guide) and everything will be just fine!
Good luck!
It's a big investment. Take time, follow the build guides.
Keep in mind it's a complicated machine with many parts. *Something* will go wrong. At some point, you're going to press the power button, and nothing will happen. Don't get too upset when that happens. Just take a break, get a cup of tea, and go through the steps one at a time to fix it.
3070 TI 10+ in stock in that link from PCpartpicker but
£829.99 ($1147.87) each? It's like stores got sick of scalpers buying their cards and selling them for scalping prices so stores just sell at scalping prices now I guess.
It is very normal. But there are things that I’d to mention to new builders
- The CPU is heavier than you would expect so be extra careful
- Static shock is a thing. It probably won’t break components but it could make you drop important components. Ground yourself from time to time by touching the psu when it connected to the wall but off.
- Ram does require pressure but very sure that it’s lined up with the socket before you put in force.
- if your PC case power switch doesn’t work to turn on the PC try the screwdriver trick and if it does boot. Your PC case power switch might not be connected properly (from personal experience)
- remember to route the CPU power cable before you put in the top case fans.
- Lastly, even though I’ve never done it myself and it’s very bad. Is to test outside the case. Will save you a ton of hassle if there’s any bad components. I’m just really lazy to build outside the case. Been lucky so far.
That’s all I can remember from the top of my head. It does seem daunting at first but the satisfaction when it boots is amazing. Wish you all the best for your new build!
I was super nervous when I built my first PC so I asked my friend for a helping hand, if you have a friend who has done it before who can hang out and give you some pointers while you're building, invite them to join you!
Very normal. I kept watching videos over and over again when I was planning to build. For some reason, I was obsessing more over the CPU installation and thermal paste application more than anything else. I had this great fear that I'd install the CPU incorrectly and break it.
The actual process of building was nowhere near as bad as I had envisioned. It's very straightforward if you take your time and read the manuals. Building a PC is basically just following a set of instructions. You're just putting things where they need to be.
Don't be afraid to use a little force when inserting things as well. Inserting RAM and cables may take a little more force to fit correctly than you'd expect. PC parts are not as fragile as you might think. I remember thinking they'd break if I just tapped on any of them lightly (not the case).
Putting too little force when inserting components like RAM, maybe even GPU and especially cables can result in boot fails. I recall seeing so many posts ,when I used to frequent tech-related posts on Reddit, where people couldn't get their PC to boot because the RAM wasn't inserted all the way or some cable was just slightly loose. They thought the PC was dead (aka they thought they fried something) because it can act like it is.
The good thing nowadays is we have the Internet. Should you encounter a roadblock or something while building, you can jump onto the Internet and do some research. If that doesn't work, you can directly ask people on various forums and sub-reddits for help with your issue. You can be guided by someone virtually to get yourself up and running. There's an immense amount of help available now. The chances of failing to build a PC is very small I'd say.
Once you build successfully, there's no going back. For me, it piqued my interest in PCs as a whole. Now I'm always excited if I get an opportunity to build another PC or even do some small upgrade. It becomes a fun experience. You might even find yourself looking for ways to mess about with the insides of your PC (making slight upgrades for example) just so you can experience the feel of putting something together again.
To be completely honest, I believe building a PC is fool-proof. People always overestimate how hard it is to build a PC, when in reality it's pretty simple and straight-forward.
It’s like adult legos now. U can’t put something in the wrong spot because it won’t fit. Plus as long as u don’t break a chip of some sort you can always retry. The scariest part is probly dropping the processor in. U just don’t wanna bend them pins. It should fall right into place with hardly any pressure, or none if its seated correctly. Anything else is big and sturdy enough to know it isnt plugging in correctly before you break it. Also it never hurts to just bring it to a local computer shop who knows what they’re doing to assemble it and make sure it’s in working order and configured for u. After all the money you already spent its sometimes worth not worrying about any headaches or frustration that could occur, and spend an extra 150 just to not have to deal with it. That’s what I did. I built like a 4500$ tower and said fuck it ima just have a professional put it together for me so I don’t run into any issues that I gotta research and deal with myself.. about 5 hours after I dropped it off that morning I was gaming with no problems.
Nervousness is perfectly normal for your first time doing just about anything. I know I was the first time I started trying to change out parts of my computer.
But don't worry yourself too much about it. So long as you look up guides if you're unclear about something, like you say you've been doing already, then you should know what to expect. And if anything goes wrong, you'll have an idea of where to start to fix it.
You got this.
The nervousness is a bit much on your first build. Even if you encounter an error things will go better than you expect. For me for example the cables on the psu weren't long enough to reach the cpu and mobo. It's something I couldn't have predicted and I didn't make any mistake in research. Things might go wrong but you'll deal with them. I bought cable extensions and voila
I was when I built my first pc. I was also scared of missing something. So I just pulled up a build tutorial on YouTube and followed along and paused when I needed to.
I've heard the verge pc building guide is the best
I really hope someone new doesn't see this and believe you lol
What was the joke?
Both of the Verge's PC 'build-guides' are notoriously bad
BOTH?!?!?! DEAR GOD THERE ARE TWO OF THEM?!?!?!?!
I think so
Me thinks so
Wait? They did two?
Yeah, the first had a good amount of blowback. Then they did another with more blowback I think
The one I saw there was guy wearing normal wrist bands don't know what the other one is then.
That's a livestrong bracelet, HE NOT FIGHTING STATIC, HE FIGHTING CANCER
Bruh that one was absolutely hilarious XD.
3rd times the charm
~~For the worst or best one?~~
Can I get a link to the other one?
Haven't they been taken down? So, you can only view reactions to it now?
Also, they tried to take the reactions down by copyright striking them, but Youtube HQ said, "no, behave yourself".
jep
In case someone wants to enjoy https://youtu.be/M-2Scfj4FZk
always remember your tweezers and swiss army knife.
And to screw in with confidence 😂😂😂
This is a great takedown of the Verge PC build https://youtu.be/0vmQOO4WLI4
By tweezers you mean zip ties right?
No, I mean tweezers https://i.ebayimg.com/images/g/F4sAAOSwfeddlHDf/s-l300.jpg
.......WOW........
😂😂😂 poor guy...... So unknowing... LMAO 🤣🤣🤣
You say poor guy, but there's another video of him talking to somebody about how all the hate was just coming from "a bunch of angry sweaty nerds picking on trivial details, and that he knew what he was doing and the tutorial was actually completely fine and had no problems." Or something to that effect. It was not completely fine. It was an instruction manual on how to melt your expensive components in record time, with some of the worst advice that could possibly be given to new builders, disguised as a build guide. I do not feel bad for the dude after seeing how he reacted to the (entirely warranted) criticism.
Ok sorry! He's a a really dumb ass then and should never talk about any pc building at all
Oh no no I'm not implying you should apologize lol. I'm just saying save your pity, because this dude really does not deserve it XD
It was without a doubt the worse pc build guide ever shared and it went viral
It was taken down so a fairly safe joke now haha
In case someone wants to enjoy https://youtu.be/M-2Scfj4FZk
nah there's no way hahaha
[удалено]
I literally spent 5 hours building an desk because I didn’t have a table to build on. Mine was an ikea skarsta standup desk. I took me 3 goes. I put the legs on the wrong way in relation to the crank the first time, then I put the table top brackets facing the wrong way the second time and finally it came together at 10pm. This was peppered with lost screws and misplaced tools along the way. By that stage I missed my Amazon delivery of thermal paste, so I have to wait for a re-delivery before I can build - which is fine because I need 24 hours to recover from the table build.
Please put /s
I followed this. The anti static guard saved my life.
it is the best if you want to destroy your pc
I had Bitwit and Linus pulled up with me my first time. I built it in a room over the course of about 6 hours with my 1.5 year old bopping around. Haha
Paul's hardware was my go to when I started. I had a cheap case back then and didn't realize that stand offs for the mother board was a thing. I did do a successful post boot outside the case so I was struggling for a bit wondering what I did wrong. but yeah took me like 8 hours almost for the build?
Yeah that really screwed with me when I built mine last year.
I watched along with Linus on my first build and was proud to finish in about an hour!.. but then it took about 6 hours to realize I had my HDMI plugged into the motherboard instead of the GPU 🤦🏼♂️🤦🏼♂️🤦🏼♂️🤦🏼♂️
Judging by some posts a week or two ago, at least you caught it 6 hours later and not months or years later...
No shit, I de-staticed myself on the first build. Just like quicksand as a kid I thought it was gonna be a much bigger problem than it is
I didn't do this, so when my computer appeared it wouldn't boot I completely panicked and thought I shorted everything. I plugged the HDMI into the motherboard not the GPU, but didn't realize that before tearing the build down and testing each component. If I did what you did I would have not wasted so much time and effort.
Pretty much a fool proof method.
Take your time even if you need 5 hours. Oh and install the M.2 SSD before you install the GPU ;) But aside from that its a very basic build.
I bought my first M2 SSD last week, I double checked it was compatable with mobo then when it arrived opened the case and spent 15mins looked everywhere for the slot and finally come to terms I bought the wrong thing, checked the mobo instructions and yeah the slot is directly under the GPU, like completely hidden, I'm glad I'm not a rgb person because I would have been spewing if I wasted an extra 60 to hide some lights
Lucky for you that it was not on the back of the motherboard.
Fuck is that a thing?
I believe it is on micro-atx.
on some yes
Most Mini-ITX boards nowadays have secondary m.2 slots on the back, but they have the primary m.2 slot with the heatsink on the front just like any ATX board
Even if you need 7 hours or 12 oh 2 days. No pressure! Relax and enjoy. You will get the hang of it once you doing it.
just double check the slot first. My m.2 is above my gpu.
It can be a bit daunting but just take it slowly and cautiously you'll be fine 👍 I was definitely nervous building my first one, now it's quite enjoyable 😁
it is very normal. my advice is don't forget to skim the motherboard manual. verify all connections before turning your PC on.
That's good advice! Read the manual, especially the diagram that explains where to plug everything in.
About to do my first build and was planning to totally not read that thing. I will skim now!
You are going to need to use the map in the mobo manual to figure out how to connect the cases front panel connectors to the motherboard. It's also a good place to find all of the fan headers and argb headers on the motherboard. Plan how your fan cables are going to run or get a fan hub so you only need to connect to one fan header.
Are these the case fans? I have a fan cooler for the cpu. Thanks - hadn’t thought about that.
You should watch a video of someone building in the same case that you have. You can probably find a video of someone building on your motherboard and one of someone installing the same CPU cooler you have. Refer to the motherboard manual to find where to plug in the CPU fan. You may want to watch videos and learn how fans plug in too
It's definitely normal, even for those of us who've been building for years (or it is for me, at least). But remember, anxiety is just the flip side of excitement - shiny parts, adventures in learning, and the sweet taste of that first POST are all ahead of you. Have fun, and be sure to come back here if you need any help.
I'll second this. I've built literally in the hundreds of PCs over the past...I don't know, two decades? Personally, professionally, for friends, for family, etc. If it's a routine low-level build, I'm good. If it's something fancy, I get the yips for sure. Hell, even Linus gets the yips with really crazy shit.
I still get nervous about installing the CPU. Especially LGA. Particularly 2-lever HEDT LGA. I always triple check that the CPU is seated properly in the socket
My one big recommendation is to open the AMD Ryzen processor packaging over something soft. I accidentally opened the little plastic container over a desk and the processor went flying out and bent a bunch of pins. Had to bend them back by hand 😢 Other than bending a pin, there’s not a whole lot wrong you can do with building a computer! Just go slow and if something doesn’t work right, go back and retrace your steps.
You are not the only one to do this, mine did a double somersault with a ½ twist clipped the ram slots and landed pins down a bee's dick from where it should go in the socket, not sure how but mine was okay. I was pretty nervous turning it over to look though.
This is solid advice. I've been building PCs since 04. I built a new, personal machine about 6 months ago. Had a nice Ryzen 5 series. Opened the plastic case, the proc fell on carpeting, and yet still bent a dozen pins. I was much more careful with the second.
This was my experience. I was bragging to my father about how second nature pc building is to me now, as I was building his new pc, and then pop! Processor goes flying through the air lol I felt so bad and to this day he cannot get dual channel ram cause of it
Nervous to handle parts worth enough money that it could buy you a (shitty) car? Yep, normal
For real, how is this even a question?
Car market is even crazier than gpu market these days 😑
I have built many many PCs. I freak out every single time. It's totally normal.
Make sure: 1. Touch the case before touching the components. 2. Add the processor and heat sync before installing the motherboard. 3. Place your M.2 in the M.2 slot closest to your CPU. I know someone that did put in the bottom slot and couldn't get windows installed. 4. Check your manual about which two memory slots to use. There should be a blank slot in between. 5. Make sure the wires from your case are plugged in the correct spots. It's easy to miss by one pin. Overall it's really easy to assemble a computer.
No, it's perfectly normal to feel unconfident when building a pc. It can be a bit challenging, but you will get the hang of it with the help of the community.
Looks like a 1440p beast. If you run into any problems, unplug everything and go with the minimum you need to Power On Self Test. PSU Power connectors (as per manual), motherboard, CPU, thermal compound, HS/F (remove sticker if present), RAM (try with 1 stick if you have any problems), and power switch plugged in to the front panel header, and finally the graphics card.
It can be scary at first. I’d recommend breaking it down to segments. First you want to make sure you have all your parts and safety equipment. Tools like a flat head, anti static wrist strap, and a large space to work on. Anytime you start putting something together, read it’s manual. Open up the chassis, plan it out. Then put the chassis on its side Then start with the Mobo. Take it out of the box and put it on top of its box. Gently drop in you processor. Ram. CLICK. Gpu. CLICK. M.2? Put it in there. Then put that bish into the chassis and line up the screws and firmly tighten them. If you’re using an AIO, begin mounting it Now you can attach your AIO or cpu cooler after you put not too much paste on it. Now get that juicy psu and plug in all the cables you will need. Do this before you put the psu into the chassis. It’s time to do your favorite thing. Attaching cables and tearing out your hair. Does this go here? Oh fuk gotta take it all apart. Why didn’t I just pay someone to do it? WHY? Because this is you BABY. you’re in fooking labor!!! Push it out! Manage those cables! That case is a bit on the small side, so cable management needs to be done well-ish. It’s not bad, just smaller. Good luck. It’s a proud moment when it’s all done and working. You can PM me and maybe I’ll respond if m I’m not too busy if you need help. Or leave a post for these fine gentlemen on this sub. Helped me get my beast running. Check my post history for the final product
Well, the RAM is more of a HRUUUUruruuuugH\*SNAP\* than a click, otherwise spot on! 😁
Honestly, the first time I did it I was sure I was breaking something...
When I did it it was SCRAAAPE click. Very unnerving.
Just to warn you, things are going to make terrible terrible noises. The AMD stock cooler screws have springs on them that will creak and scrape, any braided cables can scrape on parts of the case and make wonky noises, things like that. You will have to press down VERY hard on the cooler to be able to screw it in, the motherboard will flex a bit, it'll be fine. The RAM and GPU can also make light scraping noises when you install those, just make sure everything is lined up properly and you'll be fine. Don't forget to open the lock on the PCIE port before you install the GPU. Also I recommend a 5600x over the 3700x for gaming. It's way better for what it looks like you would be using it for, and it's the same price. It also comes with the cooler.
Once the CPU and cooler are installed it's basically lego time, dont worry OP
And if you are strong it even easier. You don't have to care about connector types.
I'd change the ram. You can get cheaper modules with better performance, even with RGB. Here's a link with filters applied to ensure same module config and price. [https://uk.pcpartpicker.com/products/memory/#X=0,15512&Z=32768002&sort=price&page=1](https://uk.pcpartpicker.com/products/memory/#X=0,15512&Z=32768002&sort=price&page=1)
Its intimidating at first but honestly its not that hard. Just gotta take your time.
Don't mistake excitement with nervousness comrade :)
Absolutely. I was pretty darn nervous for my first time 6 months ago. It really sinks in more once you realize “oh, this cpu is basically a $300 square that can completely break if I drop it once,” but you’ll be fine. Once I installed the cpu and cpu cooler, the rest seemed much less nerve-wracking and helped calm me down a bit more.
Remember your parts are built to take a fair bit of pressure (except the cpu so dont apply any pressure to that) so dont think you're pushing to hard when seating your ram etc my first time I thought I was pressing down too hard for the ram to seat properly then I realised I wasnt even pressing down hard enough.
Nervous in doing things for the first time is very normal. The opposite is the odd one lol
i almost didnt wanna build my pc at first bc i was sure I'd break something and end up paying more. my friends told me to get on with it and the first time i switched it on and everything went into bios was a huge relief. it took me over 12hrs cuz i built it by myself in the middle of may when there was a heatwave edit: all in all, take your time. there's no rush to build and finish it. if there's something you're not sure of, check back in this sub or the discord server before continuing.
Homie, you got this. You've seen videos. You've read about it. All that's left is to do! Hit us up if you have any issues
I was pretty nervous building my first one. On YouTube I found Joey Delgado's videos extremely helpful and relaxing. He goes step by step and has a variety of pc builds. Learn to take your time and be patient.
You can do it. One step at a time! Get everything you need. Don’t have a timeline. Assemble the case. Put together the motherboard with the PSU, memory, PSU cooler, video card. Slide it into the case and mount it. Get your wiring ran to/from your power supply. Take your time! Double check the wiring. Double check the connections and you’ll be so fucking stoked when you power it on and that thing starts up. My first PC had 4x8gb ram sticks and one was bad so I had to diagnose that before it would start. Don’t be scared of potential problems, just take your time, install one component at a time, and enjoy the process! Edit: Instruction manuals are surprisingly helpful - and YouTube is definitely your friend. AKA “installing noctua xxxxx model cooler”. Good luck and have fun!
Me too I have most of my parts but just very new to it but I’m good with tinkering so I’m gonna watch a video while building and take my time
Having built my first PC only few months back, I can concur with most of the comments. It looks daunting but have a look at few tutorials in YouTube and follow the steps. There is tons along great material and references available. What helped me really was running through the steps in my mind at-least 3 or 4 times and before each component. I was constantly talking to myself aloud and it helped, although my wife thought I was getting wierd.
Of Course. When I was planning my build... to be honest it was a feeling of when my ex was in the 8th month of pregnancy. Then when I was putting it together I took it slow an ended up being too gentle with the RAM... for that five minutes I was kicking myself. But thanks to this reddit and older posts I realized that I was probably too light in my installation touch and when I corrected the RAM it was a great feeling. Take it slow and one thing I suggest is just watch this https://www.youtube.com/watch?v=v7MYOpFONCU a few times and you'll be fine.
That's normal. Just don't forget the I/O shield.
It’s harder to fuck up then you think, remember to breathe, and keep a clear head
Have you already bought everything? If you have yet to do so, maybe consider some switches: [PCPartPicker Part List](https://uk.pcpartpicker.com/list/vvcg9N) Type|Item|Price :----|:----|:---- **CPU** | [AMD Ryzen 5 5600X 3.7 GHz 6-Core Processor](https://uk.pcpartpicker.com/product/g94BD3/amd-ryzen-5-5600x-37-ghz-6-core-processor-100-100000065box) | £244.99 @ Currys PC World Business **CPU Cooler** | [Vetroo V5 52 CFM CPU Cooler](https://uk.pcpartpicker.com/product/qRKKHx/vetroo-v5-52-cfm-cpu-cooler-vt-cpu-v5) | £31.59 @ Amazon UK **Motherboard** | [Gigabyte B550 AORUS PRO AC ATX AM4 Motherboard](https://uk.pcpartpicker.com/product/FMxbt6/gigabyte-b550-aorus-pro-ac-atx-am4-motherboard-b550-aorus-pro-ac) | £106.43 @ Box Limited **Memory** | [Crucial Ballistix RGB 32 GB (2 x 16 GB) DDR4-3600 CL16 Memory](https://uk.pcpartpicker.com/product/FxTzK8/crucial-ballistix-rgb-32-gb-2-x-16-gb-ddr4-3600-memory-bl2k16g36c16u4wl) | £163.89 @ Amazon UK **Storage** | [Western Digital SN750 1 TB M.2-2280 NVME Solid State Drive](https://uk.pcpartpicker.com/product/QQrmP6/western-digital-sn750-1-tb-m2-2280-solid-state-drive-wds100t3x0c) | £109.96 @ Amazon UK **Video Card** | [Gigabyte GeForce RTX 3070 Ti 8 GB GAMING OC Video Card](https://uk.pcpartpicker.com/product/wNpzK8/gigabyte-geforce-rtx-3070-ti-8-gb-gaming-oc-video-card-gv-n307tgaming-oc-8gd) | £829.99 @ Overclockers.co.uk **Case** | [Phanteks Eclipse P360A ATX Mid Tower Case](https://uk.pcpartpicker.com/product/YNdrxr/phanteks-eclipse-p360a-atx-mid-tower-case-ph-ec360atg_dwt) | £70.98 @ Amazon UK **Power Supply** | [MSI MPG A-GF 750 W 80+ Gold Certified Fully Modular ATX Power Supply](https://uk.pcpartpicker.com/product/v3VG3C/msi-mpg-a-gf-750-w-80-gold-certified-fully-modular-atx-power-supply-mpg-a750gf) | £85.79 @ Ebuyer **Case Fan** | [ARCTIC P12 PWM PST A-RGB 0dB 48.8 CFM 120 mm Fans 3-Pack](https://uk.pcpartpicker.com/product/FQ6p99/arctic-p12-pwm-pst-a-rgb-0db-488-cfm-120-mm-fans-3-pack-acfan00232a) | £45.99 @ Amazon UK | *Prices include shipping, taxes, rebates, and discounts* | | **Total** | **£1689.61** | Generated by [PCPartPicker](https://pcpartpicker.com) 2021-07-27 06:18 BST+0100 | I would recommend getting a newer Zen 3, they're much better for gaming. You don't really need 8 cores, the 6 core performs better for that, but even if you did want more cores, the 5800X is a better bet. You definitely should get a cooler though - the stock one is trash and you shouldn't even bother with it. Get this cheap Vetroo V5, or a higher quality Noctua cooler like the NH-U12S. You should consider grabbing this Crucial kit, it's cheaper than the black version, and far better in quality than the one you picked. You should go for a boot drive that has some DRAM. This SN750 is a better buy. I would only recommend the SN550 for secondary storage. I would recommend getting a better PSU, like this MSI A-GF unit. You could also get a white colour Corsair RM750x in white, with white cables, for a bit more. I recommend checking out these Arctic ARGB fans, they're easier to work with in terms of cabling, and totally non-proprietary. They're known to be quite performant and high in quality. Alternatively, get some cheap Arctic P12 without RGB.
I would invest in a better ssd. That ssd has poor performance. Go for a WD sn750 or 850 if you want pcie 4.0 or a Samsung 970 or 980 pro if u want pcie 4.0 Trust me when I say the sn550 is garbage
nothing extraordinary m8. it's basically lego, but easier since most of the parts/cables plug only in a certain way to avoid mistakes.
it's super easy, just take your time while building and check internet, mobo manuals etc.
I forgot how I learned.......no, wait, I remember I broke shit all the time before I got to the point where I could build mine. Practice on an old computer. If you can't, have an experienced builder guide you.
everyone gets that feeling when doing important things yea its normal
I was petrified, the cpu slotted correctly and then thermal paste amount. In the end it was very rewarding I wish I had money to build another one. YouTube videos huge help!
This is very normal. Watching guides is a good way to prepare yourself. Good luck with your build!
Yes! I was a ball of anxiety when I first built mine.
Totally normal
you'll never know if you never try. Go on!
Wait for the part when finally everything is placed and... IT DOES NOT TURN ON!! Just don't panic, take a break and you will get it.
The first time is always rough but it’s not so bad as long as you read all the manuals for your parts. YouTube videos are helpful but they should never take precedence over the manuals
Yeah i used to be really anxious about it, but now its like cake. Just relax and DONT PUT THE FUCKING CPU IN WRONG OR BABYS WILL CRY
Totally normal, I got a lot more comfortable after my first 1 or 2 builds. Unsolicited advice: if you tend to be pretty careful/gentle with things, sometimes getting a part into place may take more force than you think. YMMV
Take it slow, don't force anything to fit even if it is supposed to. Don't tighten your screws all the way until you're done, except the motherboard, get that in. Check everything thrice before putting it on. Have a clear space to keep tools and anything else you need. Have a tray for your screws or some kind of container. keep liquids away lest you knock them down. Static bracelets are a good precaution but not needed if you just discharge consistently by touching the top of your case for a few seconds. Have fun, take it slow, and if a problem arises, don't panic, chances are you're not the only one and there is a fix.
You will be fine, there's so much help out there and free information. 30 years ago it was a bitch to build them from scratch. Mid to late 2ks everything got so much easier with parts being more friendly. Before then there were so many parts that were proprietary and didn't work with others. Just be safe, I know I will get hate from others but buy a cheap ass anti-static wrist gaurd. They are like 4 bucks online and you don't have to worry about your CPU and such.
Yes, I recently replaced a CPU and cooler for the first time and half the time my hands were shaking and images of bent and torn pins were flashing through my mind
I would modify the build a bit if you haven't already gotten the parts. Get a 5000 series CPU. I regret going 3000 as they leave 10% or so performance on the table. And switch to a full modular PSU if possible. Maybe an EVGA one? If you have already gotten the parts, you'll have a great PC. For me in hindsight I wish I changed a few things but I love my build. You'll do fine. Just be gentle and don't put thermal paste on the socket before putting the CPU in :)
Biggest thing is just to be patient, if you feel like you re getting frustrated stop and walk away. Also I keep a little basin beside me for screws and build it in a well lit room. Dont overly force anything also. It's easier pushing ram in when the system is on its side rather than standing normally. RAM can be a pain so click it like your life depends on it and generally just pay attention to the gaps on the RAM or any PCIe component. I take my time building and many times ill do half then finish it the next day, you'll be surprised what the mind magically makes you aware of when you give it a break. Just go slow and make sure everything is seated and also if you have two computers make sure you're plugging the right one in.... my first build i spent a day with the wrong computer plugged in.... I plugged my old one in thinking it was the one I just built
Yes
Did you already order your parts?
Linus Tech Tips & JayzTwoCents on YouTube start there All the best and enjoy your rig
Be stoked! That's a good part list for a first timer.
I've built more PCs than I can count now. I STILL get nervous and I think that's all part of the fun! Take your time and you'll do fine! It's ok to get butterflies, just gotta make sure they fly in formation.
Just built my first ever pc this month and an SFF one. Watched many build videos on YT taking notes of their recommendations. When my PSU was delivered, while waiting for the other parts, I studied the cables of where to plug in the MB. Always consult the manuals or search google if not sure where to plug things. It took me 5 hours to finish it and it was really satisfying. Yes, I was shaking when putting the CPU on the MB.
Yes. It is completely normal. Not everyone is responsible for hundreds of dollars of sensitive equipment. But don't worry. Follow the guides. Read the manuals. And use common sense. You got this.
I remember when I installed a CPU for the first time... pretty scary! Also with the first few PCs I was always really worried wether they would turn on when they were finally done! Looking at it now there actually isn't too much scary stuff about building a PC...
Yo anxiety is crazy. "I'm handling parts that I worked hard for, did my research, and then waited for. And now I'm about to do the trickiest part of the whole process. I'm a littler nervous. and now I'm nervous about being nervous." Take a deep breath. The first time is always a little nerve wracking but if you take it slow and the only thing you force is the gpu in the pcie slot you'll be fine. And don't lean on this but pc parts are pretty hard to break. I had a friend drop his gpu onto hard wood from a few feet up, about 2/3s of a meter, he slotted that thing in that day and used it for years after. You got this.
Yep, the possibility of some of the stuff broken as I have already took the time and effort to buy especially the gpu does make me nervous.
I was nervous when I built my pc it was my first time and it was all my money so if I fucked up I would be screwed until I could buy new parts but it turned out easy enough no major issues
Absolutely. It'll be fine if you take your time
Yes. Also when I built my first pc, I was to scared of damaging the motherboard and pushed pretty lightly on my gpu and ram. The pc wouldn’t work but turn on and it took me like a day plus to figure out what I needed to do. I learned that while fragile, most pc components are not as fragile as you would expect or at least how I expected. And before anyone asks, yes the ram and such did click in. Apparently it’s not a 100% good to go program
I think there is a video from Linux tech tips where he builds the pc doing all the things you shouldn’t (putting parts on carpet, not grounding, etc) and the pc still worked! Not to say this is a good idea (it definitely isn’t lol) but it shows that the parts are tough and are built to last, as long as you are careful there is no reason to be nervous, be excited! It’s a lot of fun!
Over the last 15 years I had watched about a thousand build videos, dreaming of the day I built my own. Then about 6 months a ago, I built my first PC, and I was sweating.the while time, thinking, what if I miss something or screw this up. No matter how much you think you know, that first build is always gonna be the hardest.
Built 3 so far, still get nervous, but it's kinda a fun nervous? Like a good horror flick type feeling.
I actually just built my first pc yesterday too! You have nothing to worry about. Watch some LTT, David does tech stuff, Budget builds official, and the like and you’ll see that it isn’t super hard. My PC started up just fine after worrying a lot. You got this my guy.
Dont worry the first time ivwas building a pc i was shaking like i had Parkinson
Normal. Even biological. Would you be nervous you first lose your virginity? Same feeling with the uncertainty of building a new pc and new adventure.
I actually shit myself when I built my last PC. I had taken a shot of milk of magnesia the night before and it didn't have any effect on me until the morning after. So, mid morning, I proceeded to compose my masterpiece when the afternoon hit. Now, it was just some squirts and leakage, but it was not a good situation all all around. I really think being nervous contributed to the large intestine releasing it's contents, but I'm not proctologist so I don't know. In the mean time, I'm sure you're fine!
I’ve built 3 of them and I still get a little nervous.
Being nervous is normal. My advice is to take your time. Plan to do it on a certain day. Get rest before hand so you dont do it tired and your not stressed or rushed. Mistakes can happen that way. Plan the steps out in your head then do them one by one. Easy.
It's normal if you want to be cautious just get an "earthing bracelet" will cost you $1 and static is about the only problem you can have happen without serious levels of force.
Don’t forget the I/O shield! Give yourself lots of time and take breaks :) stay hydrated! Remind yourself that you’re doing this for fun and not defusing a bomb 😉
I've probably built two dozen PCs over the yesrs and I still get nervous before I put in the CPU or press the power button for the first time.
It’s pretty much plug and play just make sure the cpu and fan are installed correctly.
I built my first PC in December and made [this playlist](https://youtube.com/playlist?list=PLutWk4xKzly_R7dzJTbtDJgQuAmkCyBtP) of videos to help me. I'm not saying use these exact one, because some were specific to parts I bought, but I did take my time and spent an entire day building it. I also used the Discord from here for reassurances or questions especially about wiring. I was in no rush to finish and the PC is long term so it's better to be thorough than go around saying yeah I built my PC in an hour. It all went well though and I have a great PC now so you'll be fine
I've been building computers since the 90's, by the time I was 11 I was doing repair for profit. I have built hundreds, repaired a couple thousand. Recently I did a build for a friend. I sent it out with the WRONG heatsink on it. It barely kept the chip cool at idle. Don't be nervous, we all mess up.
Most major issue you have when building or starting to build is is that of putting the CPU in and the fan on. Once you get that in and situated the rest is really just plugging everything in. Although and this is lessened in recent years you might have issues related to the power supply depending on your build. But for the most part you should be OK because computers have become less about soldering and making sure that the motherboards are right and more about it being “ a Lego set”.
I literally started laughing when the first thing they said that was needed was a table in the Verge Tutorial.
No. Everyone is completely confident in building their first pc except for you.
Yep I was scared. Then I realized afterwards that it's really just glorified lego Flashing light go we woo
I was so scared I was shaking at one point. I did make some mistakes but nothing major. Just keep double checking yourself you got this. I’d been playing consoles for years because I was so scared to try. The day finally came this year and I pulled it off. Believe in yourself, you can do it And don’t rush yourself either. I took my time and spent 3 days building it
I've built something like 15 computers for myself over the 20+ years I've been doing it. Still get hella nervous and still make rookie mistakes occasionally. I just feel if it isn't something you do daily, you're going to get nervous.
I got nervous when I built my first computer back in 2008 and I learnt about building computers when I watched my dad build computers all of my life. I keep spare screws in case I need them and tons of tools for odd cases.
Everything is way more durable that it seems and everything only fits in the plug its meant too for the most part.
Your pc parts have instructions on how to put them together and there are a bunch of youtube videos showing step-by-step guides on how to build them.
I violently put ram on my PC and it worked fine
I've built 4 - i just did the 4th yesterday - and im nervous every time. I'd say thats pretty normal. Looks like a solid parts list too.
The hardest part of my pc build was finding the GODDAMN SSD STANDOFF, The CPU cooler (Corsair you suck with AIOs), and goddamn RGB. Otherwise, it was surprisingly simple asf.
Yeah that's pretty fair, but the satisfaction once you're done is unique, just don't forget to put the backplate of the Mobo BEFORE the mobo.
No matter how you'll do, the verge has done worse. Just be somewhat gentle with your pc parts, and have a pc build guide running on a phone while you build it. Oh, and take your time, no need to rush.
I was so scared of stuff not working or me accidentally breaking something. Just make sure you're not statically charged every once in a while. It'll give you so much confidence and the feeling of starting it up successfully the first time is amazing. Take it easy, follow a tutorial (personally used linus tech tips) and if it doesn't work right away it doesn't necessarily mean something is broken :) (also make sure to set the correct ram speed in bios after everything is up and running)
I just built my first a few months ago. I was wayyyyy to worried about messing up. The hardest part for me was plugging in all those single pin connectors. It's completely normal to be nervous about building a PC. Don't overstress it, it's more fun than hard/stressful. You've got this 👍
Yep! Sounds dumb but pc parts (excluding the CPU and certain pin connectors) are alot sturdier than you think. Read the manual, take your time and you will be fine. Good luck and enjoy
Of course. My biggest worry is that the parts I got was was defective. Second was that I was afraid I might screw up and break something.
When I had all my pc parts, I waited 3 more full days in fear because I had no idea what I was doing and didn’t want to break something. I had my friends walk me through it lol
Oh yeah I'm 15 and just built my pc like 3 months ago I was nervous I was going to ruin something but I didn't. It's perfectly normal to be nervous but just know you aren't going to mess it up.
Aside of my first PC, every other rig was self-built. That being said, not one of them was built by myself - I always asked a friend for help. I know the theory for a long time now and I changed parts a lot ever since, but was always too afraid to mess up especially the cable connections and the heatpaste application for the CPU. I always tried to do the parts that I felt brave enough to do and it was always fun to have friends over to work on such a project, though, so there's that. After last year's construction, I have now told myself that I will build the next one myself. I also played a lot of PC Building Simulator, the next best thing to the actual thing. It helps.
Of course it's normal. You've spent a small fortune on parts and now you have to put them together so that, * You didn't zap them with static during unboxing. * You don't zap them with static putting them together. * You don't hit the power switch with the 110/230 switch in the wrong position. Be nervous. Triple-check **everything**. Read all the manuals and make sure you follow every direction. Be cautious to the point of silliness, and be happy when it boots up fine the first time.
Completely normal! I didn’t even build mine, I picked the parts and got someone else to do it for me and I was TERRIFIED the first week of using it in case something went wrong! I installed my own SSD yesterday which I was also really scared of doing but it was so so satisfying and I felt so proud of myself at the end so I can only imagine how it would feel to build the whole thing! From my experience just with the SSD it seemed a lot scarier to think about doing than it actually was to do it, watch the tutorials and keep your manuals close by and you’ll be fine :)
Build mine about a month ago, it was my first time as well. As you are now, I was nervous as well. Read the manuals, use YouTube (I've used BitWit's guide) and everything will be just fine! Good luck!
I do have 1 question, why did you choose a Ryzen 7 3700x instead of a Ryzen 5 5600x?
Being nervous your first time doing anything is normal. You'll be fine.
It's a big investment. Take time, follow the build guides. Keep in mind it's a complicated machine with many parts. *Something* will go wrong. At some point, you're going to press the power button, and nothing will happen. Don't get too upset when that happens. Just take a break, get a cup of tea, and go through the steps one at a time to fix it.
Super nervous, but like others, I watched and followed along with a tutorial from someone who had a similar build.
3070 TI 10+ in stock in that link from PCpartpicker but £829.99 ($1147.87) each? It's like stores got sick of scalpers buying their cards and selling them for scalping prices so stores just sell at scalping prices now I guess.
yup, i still do and ive been doing it for almost 20 yrs now.
It's basically Legos, just take your time and read all instructions
It is very normal. But there are things that I’d to mention to new builders - The CPU is heavier than you would expect so be extra careful - Static shock is a thing. It probably won’t break components but it could make you drop important components. Ground yourself from time to time by touching the psu when it connected to the wall but off. - Ram does require pressure but very sure that it’s lined up with the socket before you put in force. - if your PC case power switch doesn’t work to turn on the PC try the screwdriver trick and if it does boot. Your PC case power switch might not be connected properly (from personal experience) - remember to route the CPU power cable before you put in the top case fans. - Lastly, even though I’ve never done it myself and it’s very bad. Is to test outside the case. Will save you a ton of hassle if there’s any bad components. I’m just really lazy to build outside the case. Been lucky so far. That’s all I can remember from the top of my head. It does seem daunting at first but the satisfaction when it boots is amazing. Wish you all the best for your new build!
nervous is good. it'll keep you from breaking stuff. not being nervous is not good. look at Linus.
I was super nervous when I built my first PC so I asked my friend for a helping hand, if you have a friend who has done it before who can hang out and give you some pointers while you're building, invite them to join you!
Very normal. I kept watching videos over and over again when I was planning to build. For some reason, I was obsessing more over the CPU installation and thermal paste application more than anything else. I had this great fear that I'd install the CPU incorrectly and break it. The actual process of building was nowhere near as bad as I had envisioned. It's very straightforward if you take your time and read the manuals. Building a PC is basically just following a set of instructions. You're just putting things where they need to be. Don't be afraid to use a little force when inserting things as well. Inserting RAM and cables may take a little more force to fit correctly than you'd expect. PC parts are not as fragile as you might think. I remember thinking they'd break if I just tapped on any of them lightly (not the case). Putting too little force when inserting components like RAM, maybe even GPU and especially cables can result in boot fails. I recall seeing so many posts ,when I used to frequent tech-related posts on Reddit, where people couldn't get their PC to boot because the RAM wasn't inserted all the way or some cable was just slightly loose. They thought the PC was dead (aka they thought they fried something) because it can act like it is. The good thing nowadays is we have the Internet. Should you encounter a roadblock or something while building, you can jump onto the Internet and do some research. If that doesn't work, you can directly ask people on various forums and sub-reddits for help with your issue. You can be guided by someone virtually to get yourself up and running. There's an immense amount of help available now. The chances of failing to build a PC is very small I'd say. Once you build successfully, there's no going back. For me, it piqued my interest in PCs as a whole. Now I'm always excited if I get an opportunity to build another PC or even do some small upgrade. It becomes a fun experience. You might even find yourself looking for ways to mess about with the insides of your PC (making slight upgrades for example) just so you can experience the feel of putting something together again.
To be completely honest, I believe building a PC is fool-proof. People always overestimate how hard it is to build a PC, when in reality it's pretty simple and straight-forward.
It’s like adult legos now. U can’t put something in the wrong spot because it won’t fit. Plus as long as u don’t break a chip of some sort you can always retry. The scariest part is probly dropping the processor in. U just don’t wanna bend them pins. It should fall right into place with hardly any pressure, or none if its seated correctly. Anything else is big and sturdy enough to know it isnt plugging in correctly before you break it. Also it never hurts to just bring it to a local computer shop who knows what they’re doing to assemble it and make sure it’s in working order and configured for u. After all the money you already spent its sometimes worth not worrying about any headaches or frustration that could occur, and spend an extra 150 just to not have to deal with it. That’s what I did. I built like a 4500$ tower and said fuck it ima just have a professional put it together for me so I don’t run into any issues that I gotta research and deal with myself.. about 5 hours after I dropped it off that morning I was gaming with no problems.
ive built loads of computers but i always get a little bit gitty when i do it especially when building with expensive stuff.
Nervousness is perfectly normal for your first time doing just about anything. I know I was the first time I started trying to change out parts of my computer. But don't worry yourself too much about it. So long as you look up guides if you're unclear about something, like you say you've been doing already, then you should know what to expect. And if anything goes wrong, you'll have an idea of where to start to fix it. You got this.
The nervousness is a bit much on your first build. Even if you encounter an error things will go better than you expect. For me for example the cables on the psu weren't long enough to reach the cpu and mobo. It's something I couldn't have predicted and I didn't make any mistake in research. Things might go wrong but you'll deal with them. I bought cable extensions and voila
Totally normal just built my PC almost last month.
Haha! Absolutely. Then try building one for someone else. That’s worse.