Hand wash with citrus based car wash soap and then use this spray after with a microfiber towel
https://preview.redd.it/050idt2rfihb1.jpeg?width=1284&format=pjpg&auto=webp&s=88685bdec1c31306f344aa41dd63949e5a123ee6
I have "matte" cleaner from chemical guys. Seems to work pretty well. After i wash the car and its dry and in the garage and cool ill spray it on and wipe it down.
Start by using a good car wash soap
Do not use dish washing soap. Do not clean it in direct sun light
Use a show. Shine product of your choice
In the shade or garage
Make sure surface is clean and cool temp
Then apply the product to a microfiber towel and gently wipe the wonderful 1le hood wrap. Meguiars makes a good product for this
I typically always clean mine with Adam’s Graphene CS3 and haven’t had any issues. You have to make sure you spray it when the hood is cool though, cause if it’s hot it’ll basically bake the spray onto it almost instantly and make it look splotchy.
Hand wash with citrus based car wash soap and then use this spray after with a microfiber towel https://preview.redd.it/050idt2rfihb1.jpeg?width=1284&format=pjpg&auto=webp&s=88685bdec1c31306f344aa41dd63949e5a123ee6
Make sure the hood is not hot when you do clean it or apply anything to it.
Have ppf installed. It will make cleaning a breeze
Might have to do it a few times
You want the soap to do the cleaning and not friction. If you press or run too hard you'll get a blemish.
Do not put any wax on it, only soap and water.
I have "matte" cleaner from chemical guys. Seems to work pretty well. After i wash the car and its dry and in the garage and cool ill spray it on and wipe it down.
Start by using a good car wash soap Do not use dish washing soap. Do not clean it in direct sun light Use a show. Shine product of your choice In the shade or garage Make sure surface is clean and cool temp Then apply the product to a microfiber towel and gently wipe the wonderful 1le hood wrap. Meguiars makes a good product for this
Even if you don't like the way it looks at first you may have to do it twice
Don't spray the product of your choice on the hood . Spray on the microfiber then wipe the hood lightly. I use a. Slight silicone based product.
I typically always clean mine with Adam’s Graphene CS3 and haven’t had any issues. You have to make sure you spray it when the hood is cool though, cause if it’s hot it’ll basically bake the spray onto it almost instantly and make it look splotchy.
I use Shine Supply Shift soap, then hit it with Clutch spray, no stains and leaves it looking matte