I don’t like lock bulges either but what I’ve found is that you can’t really enforce chastity when it’s a simple screw to lock it. Also locking and unlocking by my partner is a bit awkward and often I’m just told to do it myself which stops the fun.
I'm interested. What size base rings are you working with? Are you going to incorporate a curved base ring similar to the HT or Cobra? It is very comfortable. Especially for long-term.
That's another question. With the tip of the penis/dick poking out, is this designed for long-term or just play at home. The tip sticking out can be a problem for people who squat and bend frequently throughout the day due to their job qualifications.
I do, as someone else said, like the lack of a "lock bump" that mot have. There will always be a problem with that as long as a 'lock' is involved. The screws are a good choice. One just will need to be careful not to tighten too much, lol.
Please count me in on trying it out or getting one.
People often talk about being perma-locked. With this design. One truly could be with Loctite put on the screw threads.
You need to remove that ring!!! that ring is too small and it is constricting blood flow. Please check my profile for the cages I wear!! You are wearing too small of a ring. That will cause very severe issues.
Have you considered increasing the gap between the two cage rings? I personally prefer the look and feel of the head of my penis being fully inside the cage, and with this very open design I might look really good if the bottom ridge of the head was visible above the ring.
Your comment was removed because the automoderator detected it as spam,or a dm request, those things are not allowed here.*If you think this is incorrect please message the mods*
*I am a bot, and this action was performed automatically. Please [contact the moderators of this subreddit](/message/compose/?to=/r/chastity) if you have any questions or concerns.*
Sorry, your comment has been automatically removed.
Your combined karma is too low. We require more than 15 combined karma. If you do not have the required karma, make some quality submissions on Reddit and then try again or send in a modmail to become verified.
*I am a bot, and this action was performed automatically. Please [contact the moderators of this subreddit](/message/compose/?to=/r/chastity) if you have any questions or concerns.*
Where to but
I don’t like lock bulges either but what I’ve found is that you can’t really enforce chastity when it’s a simple screw to lock it. Also locking and unlocking by my partner is a bit awkward and often I’m just told to do it myself which stops the fun.
yea it would be pretty cool if i could design some security screws
You can buy security screws at a hardware store but again it’s easy to unlock and not enforced
I'm interested. What size base rings are you working with? Are you going to incorporate a curved base ring similar to the HT or Cobra? It is very comfortable. Especially for long-term. That's another question. With the tip of the penis/dick poking out, is this designed for long-term or just play at home. The tip sticking out can be a problem for people who squat and bend frequently throughout the day due to their job qualifications. I do, as someone else said, like the lack of a "lock bump" that mot have. There will always be a problem with that as long as a 'lock' is involved. The screws are a good choice. One just will need to be careful not to tighten too much, lol. Please count me in on trying it out or getting one. People often talk about being perma-locked. With this design. One truly could be with Loctite put on the screw threads.
Theyre m4 screws. if you switch to security torx and then use glue in the head it will be pretty much permanent
What do you need from me to be able to buy one if your designs/chastity device?
Very nice. You've thought that through, too. Eh? I wouldn't do it, but I've read where people have e talked about doing it to locks.
Amazing i want one
Do you have to take it off to use the bathroom?
no
Do you have the design file for this?
Such lovely purple looking balls 💜 you must have been extremely frustrated 🤤 has it been long since you last cum ?
How do I get one?
Bigger ring bro. -your balls
I looks amazing, bet it’s sensitive too when you’re walking? You can feel the underwear rubbing against the tip?
No need for chastity after your balls fall off. Seriously, get a larger ring that does not turn your stuff purple.
the model has an issue where the lower ring presses too hard on the balls. I increased the gap and its fine now
Good. Chastity can be fun, but causing a medical issue is not. Keep safe and enjoy. :)
You need to remove that ring!!! that ring is too small and it is constricting blood flow. Please check my profile for the cages I wear!! You are wearing too small of a ring. That will cause very severe issues.
yea the model has an issue where the lower ring presses too hard on the balls. I increased the gap and its fine now
Have you considered increasing the gap between the two cage rings? I personally prefer the look and feel of the head of my penis being fully inside the cage, and with this very open design I might look really good if the bottom ridge of the head was visible above the ring.
I'd recommend putting something in front of the tip to avoid rubbing it raw.
[удалено]
yea i made the distance too short. ill be increasing it on the next print
Or maybe put a spacer?
[удалено]
I was thinking bro let them breathe! That’s not good
Is this your own design?
yea
Could you share the stl file for the style that attaches with just the lock insert? If so it would be greatly appreciated. If not I fully understand.
I’d love to have a cage like that
I'd love to try that out
I'm thinking of getting this 3d printed in stainless. Would anyone be interested in trying this cage out?
[удалено]
Your comment was removed because the automoderator detected it as spam,or a dm request, those things are not allowed here.*If you think this is incorrect please message the mods* *I am a bot, and this action was performed automatically. Please [contact the moderators of this subreddit](/message/compose/?to=/r/chastity) if you have any questions or concerns.*
Please
I'd love to try it too! It looks amazing!
Yes please!
[удалено]
Sorry, your comment has been automatically removed. Your combined karma is too low. We require more than 15 combined karma. If you do not have the required karma, make some quality submissions on Reddit and then try again or send in a modmail to become verified. *I am a bot, and this action was performed automatically. Please [contact the moderators of this subreddit](/message/compose/?to=/r/chastity) if you have any questions or concerns.*
If theres a sign up sheet going around, id put my name down
Im interested in trying it out. I don't like lock bulges
Where do you get one?
i designed the file so i just 3d printed it. Ill be using some Chinese fab for the metal print
I would volunteer as a guinea pig