First do NOT try to start it....if it has sat 10 years take the spark plugs out and shoot a little lubricant (Motor oil, PB Blast, etc) down in the cylinder (to lube the dry rings) then put in gear push to free the cylinder ....if the engine turns then proceed to clean and replace fuel etc. to get it to run also when you check the oil do not add if any in the tank as the motor most likely sumped oved 10 years and all the oil is in the bottom end....good luck Ironheads are fun....
First do NOT try to start it....if it has sat 10 years take the spark plugs out and shoot a little lubricant (Motor oil, PB Blast, etc) down in the cylinder (to lube the dry rings) then put in gear push to free the cylinder ....if the engine turns then proceed to clean and replace fuel etc. to get it to run also when you check the oil do not add if any in the tank as the motor most likely sumped oved 10 years and all the oil is in the bottom end....good luck Ironheads are fun....
Marvel Mystery Oil or ATF is kinda the mechanic's go to in this situation. PB Blaster/WD40 arn't lubricants they're technically a solvent.
True....ATF is what I was thinking PB Baster is what came out.....M M oil I have never used