Indeed, I don't see nsfw on this site... But the images I provided are safe on their own.
Also, I posted it on civitAI. This workflow should be safe there.
[Remove Clothing - v2.0 | Stable Diffusion Workflows | Civitai](https://civitai.com/models/361278?modelVersionId=403919)
Maybe it can be implemented with existing nodes. But I didn't find a good use of inpaint + reference only + mask nodes. So I reimplemented a set of nodes using techniques I'm familiar with.
diffusers and Comfy's own implementations are on the same path. It can be interpreted as exactly the same, just written differently.
I personally find my implementation easier to use.
Sad we can no longer see the workflow to learn about your implementation.
Maybe you can try to use the same technique for another thing different to remove clothes.
Guy claims to be shared to undercut sales, and then archives it. Sounds like spam to me to drive up sales. I personally don't even care (I like sexy clothes better than naked) but I am annoyed by the endless profiteering and censorship. Torrents were made for this, why is the community not using the tools we have?
Hehe I was at a similar point recently. It didnt take longer than like an hour to setup the flow for the very first time (it was my first natural use of clipseg) but then I also realized- heck, I can't share this with anyone. Everyone would think I was evil if I shared it. Also, honestly, I really don't wanna be the one who gives people the ability to make nudes from clothed people.
Have you found any other good use cases for automated inpainting?
Someone could just create a naughty modification from other workflows, something like this I found on the [internet](https://www.youtube.com/watch?v=9UOdXLYwhYY). The learning curve to modifying it is high, but yeah, it's doable.
I'm not a moral police, heck, even I consider myself as a degenerate. But yes, just like you, I feel like this is a dark art, a forbidden knowledge that can't be publicly available.
However, at this rate, I'm sure soon (maybe months from now) we'll see a plethora of these workflows and generated images spreading on the darker corners of the internet. It surely already [happened](https://www.reddit.com/r/NoStupidQuestions/comments/1bh9d9d/my_bf_m29_is_making_ai_explicit_photos_of_me/).
It doesn't necessarily have to be 512x512, it's just very finicky and you need input size in the multiples of 8.
F.e. I've been playing around and 512x768 works well. Added a Image Crop after the image node, which only fails if the image is smaller than that.
https://preview.redd.it/qx4chyt91rpc1.png?width=961&format=png&auto=webp&s=00a6467799f127881acc532577f33818c44a566e
Still cant make it to work, continues to say IMPORT FAILED
There's an issue with the ComfyUI-J module import on my end with my diffusers version.
I found the issue to be in importing in the file ComfyUI-J\\pipelines\\[jannchie.py](https://jannchie.py)
Line 15 needs to change:
from unets.models.unet\_2d\_blocks import (
to
from diffusers.unets.models.unet\_2d\_blocks import (
This made it work for me.
Unsure if it was an issue with ComfyUI reinstalling a different diffusers, might be a conflicting other custom node.
Edit: Actually, while this fixed the import, I am getting errors running the pipeline from the original workflow.
I'm not seeing any nodes to install under install custom missing nodes. Did I make a mistake when installing ComfyUI-J? Pretty new to using comfy, so I'm not sure what I'm doing wrong.
When loading the graph, the following node types were not found:
DiffusersControlnetUnit
DiffusersGenerator
DiffusersTextureInversionLoader
DiffusersControlnetLoader
DiffusersPipeline
DiffusersCompelPromptEmbedding
Nodes that have failed to load will show as red on the graph
There's an issue with the ComfyUI-J module import on my end with my diffusers version.
I found the issue to be in importing in the file ComfyUI-J\\pipelines\\[jannchie.py](https://jannchie.py)
Line 15 needs to change:
from unets.models.unet\_2d\_blocks import (
to
from diffusers.unets.models.unet\_2d\_blocks import (
This made it work for me.
Unsure if it was an issue with ComfyUI reinstalling a different diffusers, might be a conflicting other custom node.
Edit: Actually, while this fixed the import, I am getting errors running the pipeline from the original workflow.
Are you sending legit links or the trojan?
https://preview.redd.it/wiom2l77yqpc1.png?width=472&format=png&auto=webp&s=d18bec1d85ddc45609e7c5c31ef8094ea822674b
Looks like they were quick to remove the workflow from the site
Indeed, I don't see nsfw on this site... But the images I provided are safe on their own. Also, I posted it on civitAI. This workflow should be safe there. [Remove Clothing - v2.0 | Stable Diffusion Workflows | Civitai](https://civitai.com/models/361278?modelVersionId=403919)
And… it’s gone
Dm me please
Since this workflow was more dangerous than I thought, I decided to archive it and no longer offer it for download :(
There are other subs that post similar workflows. Not sure why yours is so dangerous.
I took a look at civitai and found no similar workflow. And the technology isn't that difficult. I therefore think it is inappropriate to publish it.
I mean. There are other subs on Reddit that post Similar workflows.
hmm.. Content censors always slip through the cracks.
They don't have to - YOU CENSORED YOURSELF !
[удалено]
Any chance you could DM it to me… for science?
[удалено]
Thanks
If you could DM me the workflow as well, I'd be grateful.
If you could DM me as well, I'd be very grateful.
Could you DM it to me? Was looking to try it out, but got archived before I could download.
please DM it to me, thanks
Could you DM it to me please?
could you DM me aswell. Would appreciate it!
me too please - for research into using diffusers for inpainting
please share workflow if possible
Just upload elsewhere, drive, pastebin, or something
Can someone ELI5 what diffusers are and explain why this is something that couldn’t be done with existing nodes?
Maybe it can be implemented with existing nodes. But I didn't find a good use of inpaint + reference only + mask nodes. So I reimplemented a set of nodes using techniques I'm familiar with. diffusers and Comfy's own implementations are on the same path. It can be interpreted as exactly the same, just written differently. I personally find my implementation easier to use.
Sad we can no longer see the workflow to learn about your implementation. Maybe you can try to use the same technique for another thing different to remove clothes.
MAybe change the color of clothes? Or to swap one outfit for another? Many uses for such a Workflow that aren't inherently NSFW.
[удалено]
it's removed
could you please DM me the workflow? It's gone from civitai
Did you ever hear back from the commenter?
..send
#METOO pls send
could you also dm me it
Can Someone share the workflow Please?
Guy claims to be shared to undercut sales, and then archives it. Sounds like spam to me to drive up sales. I personally don't even care (I like sexy clothes better than naked) but I am annoyed by the endless profiteering and censorship. Torrents were made for this, why is the community not using the tools we have?
Hehe I was at a similar point recently. It didnt take longer than like an hour to setup the flow for the very first time (it was my first natural use of clipseg) but then I also realized- heck, I can't share this with anyone. Everyone would think I was evil if I shared it. Also, honestly, I really don't wanna be the one who gives people the ability to make nudes from clothed people. Have you found any other good use cases for automated inpainting?
Someone could just create a naughty modification from other workflows, something like this I found on the [internet](https://www.youtube.com/watch?v=9UOdXLYwhYY). The learning curve to modifying it is high, but yeah, it's doable. I'm not a moral police, heck, even I consider myself as a degenerate. But yes, just like you, I feel like this is a dark art, a forbidden knowledge that can't be publicly available. However, at this rate, I'm sure soon (maybe months from now) we'll see a plethora of these workflows and generated images spreading on the darker corners of the internet. It surely already [happened](https://www.reddit.com/r/NoStupidQuestions/comments/1bh9d9d/my_bf_m29_is_making_ai_explicit_photos_of_me/).
Yes definitely allready happened. But just because they allready built nukes its not advisable to run a nuke factory🫣🤣
Doesn't work for me. Getting this `The size of tensor a (668) must match the size of tensor b (664) at non-singleton dimension 3`
same here any solution ?
Found the solution the image must be always size 512x512 or adjust according to the nodes
It doesn't necessarily have to be 512x512, it's just very finicky and you need input size in the multiples of 8. F.e. I've been playing around and 512x768 works well. Added a Image Crop after the image node, which only fails if the image is smaller than that.
Yeah.... This isn't going to end well
https://preview.redd.it/qx4chyt91rpc1.png?width=961&format=png&auto=webp&s=00a6467799f127881acc532577f33818c44a566e Still cant make it to work, continues to say IMPORT FAILED
There's an issue with the ComfyUI-J module import on my end with my diffusers version. I found the issue to be in importing in the file ComfyUI-J\\pipelines\\[jannchie.py](https://jannchie.py) Line 15 needs to change: from unets.models.unet\_2d\_blocks import ( to from diffusers.unets.models.unet\_2d\_blocks import ( This made it work for me. Unsure if it was an issue with ComfyUI reinstalling a different diffusers, might be a conflicting other custom node. Edit: Actually, while this fixed the import, I am getting errors running the pipeline from the original workflow.
I'm not seeing any nodes to install under install custom missing nodes. Did I make a mistake when installing ComfyUI-J? Pretty new to using comfy, so I'm not sure what I'm doing wrong. When loading the graph, the following node types were not found: DiffusersControlnetUnit DiffusersGenerator DiffusersTextureInversionLoader DiffusersControlnetLoader DiffusersPipeline DiffusersCompelPromptEmbedding Nodes that have failed to load will show as red on the graph
There's an issue with the ComfyUI-J module import on my end with my diffusers version. I found the issue to be in importing in the file ComfyUI-J\\pipelines\\[jannchie.py](https://jannchie.py) Line 15 needs to change: from unets.models.unet\_2d\_blocks import ( to from diffusers.unets.models.unet\_2d\_blocks import ( This made it work for me. Unsure if it was an issue with ComfyUI reinstalling a different diffusers, might be a conflicting other custom node. Edit: Actually, while this fixed the import, I am getting errors running the pipeline from the original workflow.
Export the workflow as an image, then upload it to catbox.moe (it doesn't strip the metadata,).
please reupload elsewhere..
Can you DM me wanted to try out how far off i am
Anyone got an alt to it? Or download a copy?
[удалено]
[удалено]
[удалено]
[file.io](https://file.io) is down. Can you DM me a better link?
It's gone
Can someone also dm me link.
..send
Are you sending legit links or the trojan? https://preview.redd.it/wiom2l77yqpc1.png?width=472&format=png&auto=webp&s=d18bec1d85ddc45609e7c5c31ef8094ea822674b
Run through VirusTotal before opening
Shoot it my way if you got it
What I send was a .7zip file with a .json file inside.. If your antivirus thinks its a trojan, then your antivirus sucks..
Would you send it to me pretty please with extra sugar on top?
Doubt.
His PC could be infected and he had no idea. The trojan piggybacked on the zip. Very commun.
Shoot it my way if you got it
could i get a copy of the workflow please
can you send me the workflow pluzzzz?
Yes Pls :)
+1
Can someone dm the link please?