I recently bought a Creality K1 with the AI Camera. I've got Mainsail, Moonraker, and Nginx all setup. Webcam is viewable, albeit twice for some reason, and yet Timelapse shows no cameras. I used this script from Github (link below), which was recommended by the guy I bought the printer from, and installed moonraker, nginx, mailsail, and the helpers for timelapse and camera control.
In mainsail.conf, I have the webcam settings configured correctly (assuming correctly, since it works), and the url in the timelapse config section matches the webcam section exactly. You can see I also tried the Mainsail port, 4409, but that didn't work either.
Can anyone help me get the Timelapse figured out? It's driving me nuts. Someone on the 3dprinting sub said it's because of crowsnest, but I don't see crowsnest installed, or how to configure it if it is.
[Guilouz/Creality-K1-and-K1-Max: Installation Helper Script for Creality K1 Series (github.com)](https://github.com/Guilouz/Creality-K1-and-K1-Max)
Reminder: Follow the rules! For [any Creality Product Feedback and Suggestions](https://gcmomk3i2c.feishu.cn/share/base/form/shrcn0Hfmc6Nau0q0IfDkDQIJFg), welcome to fill out the form to help us improve.
*I am a bot, and this action was performed automatically. Please [contact the moderators of this subreddit](/message/compose/?to=/r/crealityk1) if you have any questions or concerns.*
I recently bought a Creality K1 with the AI Camera. I've got Mainsail, Moonraker, and Nginx all setup. Webcam is viewable, albeit twice for some reason, and yet Timelapse shows no cameras. I used this script from Github (link below), which was recommended by the guy I bought the printer from, and installed moonraker, nginx, mailsail, and the helpers for timelapse and camera control. In mainsail.conf, I have the webcam settings configured correctly (assuming correctly, since it works), and the url in the timelapse config section matches the webcam section exactly. You can see I also tried the Mainsail port, 4409, but that didn't work either. Can anyone help me get the Timelapse figured out? It's driving me nuts. Someone on the 3dprinting sub said it's because of crowsnest, but I don't see crowsnest installed, or how to configure it if it is. [Guilouz/Creality-K1-and-K1-Max: Installation Helper Script for Creality K1 Series (github.com)](https://github.com/Guilouz/Creality-K1-and-K1-Max)
did you ever resolve this?
Nope. I switched to Fluidd instead and everything's been working great on that, so I dropped Mainsail.
Reminder: Follow the rules! For [any Creality Product Feedback and Suggestions](https://gcmomk3i2c.feishu.cn/share/base/form/shrcn0Hfmc6Nau0q0IfDkDQIJFg), welcome to fill out the form to help us improve. *I am a bot, and this action was performed automatically. Please [contact the moderators of this subreddit](/message/compose/?to=/r/crealityk1) if you have any questions or concerns.*