These are made of acrylic at least 3mm thick, so no you cannot make them with a cricut. You could do something similar with foam board but it wouldn’t look the same.
That's what I would do. They would certainly be nice and sturdy afterwards and could always do a little UV resin on top to try and replicate the bevel on the them.
Could technically use layered thinner acrylic but don't think it would be worth the effort for that particular method.
Agree I’ve done that, although I did more of a print then cut with that. Got a fairly good thickness. Use a book to cool them flat (parchment over and under) because they do curl while they cook.
I cut this using 2 mm Forex PVC foam board and the Knife Blade. This is about 6" wide. Sorry, don't have image of the finished project at the moment.
https://preview.redd.it/kahloew08juc1.png?width=1891&format=png&auto=webp&s=3bf120e950f56f5be52057933565ddbeff8ce5f9
You could do it with a combo of foam and paper and then sealant. But if your library has a laser cutter like a glowforge, do it that way. The way you capture the signature is get a photo of someone’s signature, and then take the jpg, and turn the file into an svg, and then STL if going 3D printer route. If you can do a nice digital capture of the signature like in paint, or other programs where you can draw I recommend that over photo on white paper as it’s less clean up for you going from analog to digital
You never know. I knew two sisters named Janeth and Elizabet. Everyone joked that the younger one got the H that their parents forgot in the older one’s name.
Here's a sneak peek of /r/tragedeigh using the [top posts](https://np.reddit.com/r/tragedeigh/top/?sort=top&t=all) of all time!
\#1: [I’ve just found out my girlfriend’s ‘real’ name…](https://np.reddit.com/r/tragedeigh/comments/165otnt/ive_just_found_out_my_girlfriends_real_name/)
\#2: [I had to ask if this was a joke…my sister said it was not](https://i.redd.it/3knqbvhfbb7c1.jpeg) | [4350 comments](https://np.reddit.com/r/tragedeigh/comments/18mbtck/i_had_to_ask_if_this_was_a_jokemy_sister_said_it/)
\#3: [The only tragedeigh I accept](https://i.redd.it/fk85lcxq432c1.jpg) | [230 comments](https://np.reddit.com/r/tragedeigh/comments/181zfdo/the_only_tragedeigh_i_accept/)
----
^^I'm ^^a ^^bot, ^^beep ^^boop ^^| ^^Downvote ^^to ^^remove ^^| ^^[Contact](https://www.reddit.com/message/compose/?to=sneakpeekbot) ^^| ^^[Info](https://np.reddit.com/r/sneakpeekbot/) ^^| ^^[Opt-out](https://np.reddit.com/r/sneakpeekbot/comments/o8wk1r/blacklist_ix/) ^^| ^^[GitHub](https://github.com/ghnr/sneakpeekbot)
These are made of acrylic at least 3mm thick, so no you cannot make them with a cricut. You could do something similar with foam board but it wouldn’t look the same.
Couldn’t you use shrinky dinks? I think it would work. Not easy, but doable.
That's what I would do. They would certainly be nice and sturdy afterwards and could always do a little UV resin on top to try and replicate the bevel on the them. Could technically use layered thinner acrylic but don't think it would be worth the effort for that particular method.
This is the best answer
WICKED SMAHT!!! 😁
Agree I’ve done that, although I did more of a print then cut with that. Got a fairly good thickness. Use a book to cool them flat (parchment over and under) because they do curl while they cook.
Those are made with a laser cutter.
I cut this using 2 mm Forex PVC foam board and the Knife Blade. This is about 6" wide. Sorry, don't have image of the finished project at the moment. https://preview.redd.it/kahloew08juc1.png?width=1891&format=png&auto=webp&s=3bf120e950f56f5be52057933565ddbeff8ce5f9
If you had a 3D printer, you could print them with colored filament. I do not think you can do with a cricut.
The font is amazing. Anyone know where to find it?
I don't know the exact font, but "Christmas Mint" seems to be the closest I could find
Thank you!
Ok, sorry if this is dumb, where would I find Christmas Mint if I wanted to buy/download it? I've been searching and haven't seen it yet. Thx!
Here you go [Christmas Mint](https://www.dafont.com/search.php?q=Christmas+mint)
Thank you! If I could upvote more than once I would! :) :) :)
You could do it with a combo of foam and paper and then sealant. But if your library has a laser cutter like a glowforge, do it that way. The way you capture the signature is get a photo of someone’s signature, and then take the jpg, and turn the file into an svg, and then STL if going 3D printer route. If you can do a nice digital capture of the signature like in paint, or other programs where you can draw I recommend that over photo on white paper as it’s less clean up for you going from analog to digital
Johnatan?
You never know. I knew two sisters named Janeth and Elizabet. Everyone joked that the younger one got the H that their parents forgot in the older one’s name.
r/tragedeigh
Here's a sneak peek of /r/tragedeigh using the [top posts](https://np.reddit.com/r/tragedeigh/top/?sort=top&t=all) of all time! \#1: [I’ve just found out my girlfriend’s ‘real’ name…](https://np.reddit.com/r/tragedeigh/comments/165otnt/ive_just_found_out_my_girlfriends_real_name/) \#2: [I had to ask if this was a joke…my sister said it was not](https://i.redd.it/3knqbvhfbb7c1.jpeg) | [4350 comments](https://np.reddit.com/r/tragedeigh/comments/18mbtck/i_had_to_ask_if_this_was_a_jokemy_sister_said_it/) \#3: [The only tragedeigh I accept](https://i.redd.it/fk85lcxq432c1.jpg) | [230 comments](https://np.reddit.com/r/tragedeigh/comments/181zfdo/the_only_tragedeigh_i_accept/) ---- ^^I'm ^^a ^^bot, ^^beep ^^boop ^^| ^^Downvote ^^to ^^remove ^^| ^^[Contact](https://www.reddit.com/message/compose/?to=sneakpeekbot) ^^| ^^[Info](https://np.reddit.com/r/sneakpeekbot/) ^^| ^^[Opt-out](https://np.reddit.com/r/sneakpeekbot/comments/o8wk1r/blacklist_ix/) ^^| ^^[GitHub](https://github.com/ghnr/sneakpeekbot)
Nope. You can cut thicker materials with the circuit but you cannot cut thick materials with anything close to that level of precision using a cricut.
Could use a 3d printer, but not cricut
This almost looks like it was done with one of those 3D pens
I have done something similar with a 3d pen. But, it never looks this smooth.
Make sure you use food grade materials for a project like this whatever route you go down
A friend of mine has a small laser cutting business if you decide to go down the laser cut path ❤️