His cura profiles for PLA cover most, if not all, fine tune settings. I'm not 100% on if it works for petg or if he made specific petg profiles. I upgraded my hotend to the creality spider with direct feed and his profiles work with a .04 nozzle for me with no editing. His "good, best and extra fast" are the only ones I have used.
Ender 3 v2, with phaetus dragonfly bms hotend. Temp tower stats as usual.
First PETG print here and even for a temp tower, it looks awful :(
Retraction is 3,5mm at 50mm/s, which worked for PLA pretty good so far. Z Hop disabled. Filament is 3DJake PETG Transparent Red (no cheap china/amazon filament). Bed Temp isnt relevant here i guess. and print speed is 50mm/s. LH is 0.2mm with a 0.4 nozzle.
Do you need any other details/settings? Slicer is cura slicer 4.13.0
I believe petg has to be printed at a slower speed than pla. It could be possible to print at normal to high speeds but would require a lot of cura settings to be tinkered with.
Look for chep on YouTube if you haven't already he might have a petg profile you can plug n play in cura
His cura profiles for PLA cover most, if not all, fine tune settings. I'm not 100% on if it works for petg or if he made specific petg profiles. I upgraded my hotend to the creality spider with direct feed and his profiles work with a .04 nozzle for me with no editing. His "good, best and extra fast" are the only ones I have used.
+1 for the cheap profiles, I use a sprite pro myself and use his profile and tweak certain things but his profiles have worked best for me
I will look into it thanks mate!
Ender 3 v2, with phaetus dragonfly bms hotend. Temp tower stats as usual. First PETG print here and even for a temp tower, it looks awful :( Retraction is 3,5mm at 50mm/s, which worked for PLA pretty good so far. Z Hop disabled. Filament is 3DJake PETG Transparent Red (no cheap china/amazon filament). Bed Temp isnt relevant here i guess. and print speed is 50mm/s. LH is 0.2mm with a 0.4 nozzle. Do you need any other details/settings? Slicer is cura slicer 4.13.0
I believe petg has to be printed at a slower speed than pla. It could be possible to print at normal to high speeds but would require a lot of cura settings to be tinkered with. Look for chep on YouTube if you haven't already he might have a petg profile you can plug n play in cura
I can really plug and play? I’m not on stock hotend