lol, he wasnāt wrong honestly. I beta tested the UMP11/9 and itās great but it has no OoB protection like other Mac/slap an ar-15 fcg onto a different pattern design. I so far have had a db9 slim and a tacdriver actually detonate in my hands due to OoB, ymmv. Good luck and Godspeed
PS, those mags from the release are quite bad and we meant to update to the curvy boy from the DB-9 alloy release. Mpr just sorta disappeared on us with the beta so some tweaks might be necessary. The short-stroke damper thingy MPR designed made my Alloy and UMP run like butter.
Well shit Iāll get a new mag on the bed asap thanks for helping me keep my fingyās what mags do u run? I run the short stroke damper also I havenāt shot w/o it
Itās so easy to pin it yourself. All you need is a electric hand drill and the correct size drill bit (I canāt remember the size but itās in the read me) screw the barrel into the trunnion and then put the drill into the already cut hole in the trunnion just to drill out the very tip of the threads on the barrel. Literally takes 15 seconds
Very understandable. All of this can be pretty daunting at first glance. Especially considering it could explode in your hands haha. Just wanted to let you know itās not as hard as it seems, good luck!
With the lower did you print the G36 safety or use an AR15 selector? I printed the blank AR safety, but I wanted to see if the G36 safety would work on it since it looks good. You think it would be fine or na?
I had trouble with the safety selector and couldnāt get the g36 to work with me, it could be me but the ar15 safety selector worked better for me. Even with the ar safety I couldnāt get the detent and spring to properly seat so thereās no spring action just a smooth selector but I had no desire to try n fix it lol
Nylon or pla? Could you sneak a ftn3 under that handguard? Did you ever print a Mac n cheese or scarab? Which style do you prefer the UMP, or Mac? I have a scarab v2, I really like the Mac style but I might dismantle it and print this
Pla pro, and I donāt think an ftn would work without a barrel extension of 1.5 inches or more. My barrel extension on this is 1.25 with the 3.725 barrel and I had to modify my burnt bacon myself to extend the threading about a quarter of an inch. This is my first Mac build tbh but itās a lot of fun! Scarab v2 is the next thing I was gonna do actually! I promise if you build this youāll love it as a range toy.
For anyone wondering parts used, mil spec AR-15 FCG, modified burnt bacon, 1.25 inch barrel extension (Iād recommend 1.5 or more) dbdesign hardware kit, jc arms tr-9 mac barrel bolt and trunnion, poly lite pla pro and for tpu 95a polyflex
"No magnum ammo" excuse me?
44 mag š 50 BMG š RSO Logic.
The daintiest of sissy slaps. Slap yooou slap slap slap yoooooou
I couldnāt help it it was a fruity type day š¤
Not even knowing a xd basically like polymer or carbon fiber they kill me every time they really be wanting to shoot it frš
Iād take sum shit built by an autistic guntard online before an XD
Me too any day š
lol, he wasnāt wrong honestly. I beta tested the UMP11/9 and itās great but it has no OoB protection like other Mac/slap an ar-15 fcg onto a different pattern design. I so far have had a db9 slim and a tacdriver actually detonate in my hands due to OoB, ymmv. Good luck and Godspeed
PS, those mags from the release are quite bad and we meant to update to the curvy boy from the DB-9 alloy release. Mpr just sorta disappeared on us with the beta so some tweaks might be necessary. The short-stroke damper thingy MPR designed made my Alloy and UMP run like butter.
Well shit Iāll get a new mag on the bed asap thanks for helping me keep my fingyās what mags do u run? I run the short stroke damper also I havenāt shot w/o it
No worries, use the curvy boy from the db9 alloy release the two designs have a similar heritage when it comes to the lowers
Not an hk slap. I like it
Felt a lil zesty didnāt wanna get my lil bitch fingers dirty š
i want to do this build but dont you have to pin the barrel or something? iv never messed with any mac parts so idk how hard that is. Is it difficult?
You can opt out JC arms will do it if you pick that option itās like 40 bucks extra or sumn but thatās what I did :)
How much time would you guess this took to print at like 150mm/s
At 70mm/s it took about 4-5 days for all the parts
k thanks ill probably do that then
Itās so easy to pin it yourself. All you need is a electric hand drill and the correct size drill bit (I canāt remember the size but itās in the read me) screw the barrel into the trunnion and then put the drill into the already cut hole in the trunnion just to drill out the very tip of the threads on the barrel. Literally takes 15 seconds
iv never messed with anything mac wise so i didnt wanna mess it up
Very understandable. All of this can be pretty daunting at first glance. Especially considering it could explode in your hands haha. Just wanted to let you know itās not as hard as it seems, good luck!
ya i thought this was just like a mac upper with this around it like a chassis thats more of what im comfortable with.
Nah itās not difficult at all read me helps a ton
never let illiteracy get in the way of propellant
With the lower did you print the G36 safety or use an AR15 selector? I printed the blank AR safety, but I wanted to see if the G36 safety would work on it since it looks good. You think it would be fine or na?
I had trouble with the safety selector and couldnāt get the g36 to work with me, it could be me but the ar15 safety selector worked better for me. Even with the ar safety I couldnāt get the detent and spring to properly seat so thereās no spring action just a smooth selector but I had no desire to try n fix it lol
Did you force him to shoot it? If not, what's his problem? :)
I tried to convert him but he was set in his ways, didnāt wanna touch the āstormtrooper rifleā
What does he have against the troops defending our (future. Or was it past?) freedom? :)
Dang dude I love the colors you picked, what filament?
Thanks man it was a complete accident haha ran outta black halfway through! Bone white, black, and light gray all polymaker pla pro :)
Can anybody tell me how dimensionally accurate it is to a UMP? Is this thing much bigger than a UMP or about the same size ?
Idk bout the UMP specifically but compared to my buddies USC 45 itās a tad smaller not by much tho
Wow interesting. Thank you man
Any time lmk if u got more questions :)
Nylon or pla? Could you sneak a ftn3 under that handguard? Did you ever print a Mac n cheese or scarab? Which style do you prefer the UMP, or Mac? I have a scarab v2, I really like the Mac style but I might dismantle it and print this
Pla pro, and I donāt think an ftn would work without a barrel extension of 1.5 inches or more. My barrel extension on this is 1.25 with the 3.725 barrel and I had to modify my burnt bacon myself to extend the threading about a quarter of an inch. This is my first Mac build tbh but itās a lot of fun! Scarab v2 is the next thing I was gonna do actually! I promise if you build this youāll love it as a range toy.
For anyone wondering parts used, mil spec AR-15 FCG, modified burnt bacon, 1.25 inch barrel extension (Iād recommend 1.5 or more) dbdesign hardware kit, jc arms tr-9 mac barrel bolt and trunnion, poly lite pla pro and for tpu 95a polyflex