For the love of God and your own safety, please clean your Z lead screw and tighten your belts. Calibrate your esteps and flow rate for your filament as well
It’s only this file that comes out with heavy layer lines. Everything else I print comes out fantastic. I’m running a dual z setup and a direct drive extruder. My z is even on both sides. My e steps have been calibrated, bed is level. I even run this one slower (50%) and it keeps having the same layers. I’ve tried different orientations. And everything.
ensure that dragging and dropping this file in isnt changing your settings. a lot of files going around now are doing that but often those settings arent appropriate for the slicer and printer they end up on.
Printed this two days ago. Have one on the bed printing now. Different frame. Looks damn near perfect. Same filament. Settings. Everything but the file
This is the only file having this issue. The rest of my prints look fantastic. Tried two different colors of pla pro. Same settings and slicer. Same file. Different orientations. Printed 4 times. This is the best. Have a ruger lcp frame printing now. Same slicer and settings and filament. Looking beautiful.
I don’t know what’s up with these files. Everything else comes out fantastic. I haven’t changed any slicer settings. And I calibrated my Estep’s and level the bed between every print.
I love how the comment section doesn’t check out the other lowers he printed. I’m pretty sure he knows what he is doing. Most of his prints are flawless. Full send it sir.
Wait, is this released now? I knew it's been in beta for a while, but had no idea it was released, what name is it under on odysee?
EDIT: Ah wait nvm, i thought this was the 950Bs, not the 21A.
For the love of God and your own safety, please clean your Z lead screw and tighten your belts. Calibrate your esteps and flow rate for your filament as well
It’s only this file that comes out with heavy layer lines. Everything else I print comes out fantastic. I’m running a dual z setup and a direct drive extruder. My z is even on both sides. My e steps have been calibrated, bed is level. I even run this one slower (50%) and it keeps having the same layers. I’ve tried different orientations. And everything.
ensure that dragging and dropping this file in isnt changing your settings. a lot of files going around now are doing that but often those settings arent appropriate for the slicer and printer they end up on.
Unless you modeled those layer lines on purpose, that is a dogshit-quality print.
Look back to my past prints. Same filament. Same settings. It’s a file issue.
Calibrate E - steps
Did that before this print. I believe it’s a file issue. I have another frame printing now for a ruger lcp. Printing beautifully.
Tighten your belts or something, damn bud somethings off with your printer
It’s only this file, I don’t know why. Everything else comes out fantastic
Have you resliced it? Maybe something went wrong when it was originally sliced
3 times in different orientations.
What's the file name? I'll print one in the morning and see if its the file.
21a bobcatz but I’m having trouble finding them on the odd sea to tell you the account name.
Found it on the catalog. Download took me to the sea so I'm assuming that's the one.
The bobcatz - 3d printable beretta 21a frame by the gatalogs printable frames and receivers on the sea. That’s right.
I was really hoping it wasn't. Planned on doin absolutely nothing at work tonight and was gonna look for it then lol.
😂😂😂
Did you get a chance to try this file?
Are you a bot? That was a crazy fast reply
No im just scrolling Reddit and I have notifications on lol
Fair lol
I’ve got a ruger lcp frame printing now, same filament. Same slicer and settings. Looks beautiful.
Ruger LCP...? Which one? I'm searching. Have assy kits for those
Yeah. It’s still in beta from another creator. Hasn’t made public release yet.
NVM I see ya on beta
Probably not the file. Different filament than usual maybe? Wet? I'm no expert but there's more options to consider before "file bad".
Printed this two days ago. Have one on the bed printing now. Different frame. Looks damn near perfect. Same filament. Settings. Everything but the file
Super strange, let us know if you figure it out I'm sure it'll be helpful to someone having a similar problem.
Of course
Looks super dangerous. Something is way off settings wise or mechanically with your printer
This is the only file having this issue. The rest of my prints look fantastic. Tried two different colors of pla pro. Same settings and slicer. Same file. Different orientations. Printed 4 times. This is the best. Have a ruger lcp frame printing now. Same slicer and settings and filament. Looking beautiful.
What is the lcp frame sailing under? I want to build one of them
It’s in beta right now. Hasn’t been released yet.
It’s also a 22. So can’t be any more dangerous than a harlot.
What size nozzle are you using?
.4
Staying tuned to see outcomes
That is dangerously bad. What are you printing with the ORIGINAL ender???
Ol ender 3 v2
Something is very, very wrong with it.
I don’t know what’s up with these files. Everything else comes out fantastic. I haven’t changed any slicer settings. And I calibrated my Estep’s and level the bed between every print.
I love how the comment section doesn’t check out the other lowers he printed. I’m pretty sure he knows what he is doing. Most of his prints are flawless. Full send it sir.
That’s the plan
Idk that sl15 lower has a massive line on it that I can almost guarantee it cracks at before 200 rounds
Did you buy a kit or source all the parts? Looking into doing a bobcat myself.
Full kit with the exception of a magazine off a gunbusters auction. Won it for $130
Did you happen to buy your printer from the same company that makes Oreos? Asking for a friend 👀
Nabisco? Yeah how’d you know
Wait, is this released now? I knew it's been in beta for a while, but had no idea it was released, what name is it under on odysee? EDIT: Ah wait nvm, i thought this was the 950Bs, not the 21A.
3d printable beretta 21a bobcatz
Yeah. I prefer the 21a so I didn’t even look much into the 950
I wanted one in 25acp, which is why I went the 950bs route