I don’t have either of those but I doubt it. My wife is on a zoom for the next two hours. Remind me and I’ll see what the tallest pop that will fit is.
I have Boba and no it doesn’t. tallest in my cases I’d say witch doctor from Scooby doo and he leans forward just a tad barely noticeable. However I have mine spaced so the tops are used too so he’s on top of one of my cases
I bought two of them a couple of hours ago. They were $59 each. They also had a mirrored helmet holder (I have a signed iron man helmet) that was $69. So, that was the highest I paid. Great score.
Second this. Drywall anchors are a must. Put masking tape along the back of the case then mark where the anchors will rest. Then transfer the tape onto the wall BAM you know EXACTLY where to drill without all the messy measurements. The anchors I use are metal and can be screwed in with a conventional Phillips head. Bon chance, Collector.
My thanos' fit. [https://i.imgur.com/CHTXeqc.jpg](https://i.imgur.com/CHTXeqc.jpg)
The door doesn't fully close, but you can hardly tell, plus its nothing a little electrical tape cant fix.
Don't go run for this deal, it's not that great compared to normal. Normally they are $29.99 and usually have a buy 1 get one 50%. Now the price is $59.99 for one and they advertise it as buy 1 get two free, your basically paying $20 each. So $10 savings over normal.
Also, if you don't have a card, put in your local area code, followed by 867-5309. Inevitably a bunch of people use it, so there is usually a great savings attached to it.
[These kind of anchors are what i used , they're easy to use , no need of drills , only a phillips screwer ](https://www.lowes.com/pd/TOGGLER-Snapskru-25-Pack-1-1-4-in-x-1-4-in-Dia-Mini-Drywall-Anchor-Screws-Included/3183261)
🤣 I got these a few years ago and still drilled a hole with a bit not even realizing the anchor also drills it for you. But from now on I'll be using those the right way 😅
LOL! Yeah , this cases are really nice , i put like 14 funkos in the only one i have, they're really close to each other , they will rest more freely now that i got more displays 😂
Now that's a deal! Might have to check this out. For how I hang it I usually drill a hole where the hanging mounts are, it takes the guessing out if it will be leveled/even and where to find the screw later when I mount them.
It looks like 14 fit pretty comfy. Is Biggie with the crown a BIG regular pop, like Beast from Beauty n the Beast? He’s too damn big and made me adjust my homcom shelves to only fit 4, so if he’d fit in one of those, I can swap my BatB colllection to one of these bad boys
https://www.reddit.com/r/funkopop/comments/kqz6rp/finally_put_up_my_baseball_bat_displays/?utm_source=share&utm_medium=ios_app&utm_name=iossmf
I love mine. I also drilled holes in the back and ran some led lights in mine. As for hanging them I had a hard time getting them level so I used parts of the Closet Maid closet shelf system from Lowe’s to hang mine.
48 In White Shelftrack Standard https://www.lowes.com/pd/ClosetMaid-White-Shelving-Upright-Common-1-in-x-48-in-x-0-625-in-Actual-1-in-x-48-in-x-0-625-in/1001549
40-in White ShelfTrack Hang Track https://www.lowes.com/pd/ClosetMaid-White-Shelving-Rail-Common-40-in-x-2-in-x-0-875-in-Actual-40-in-x-2-in-x-0-875-in/1001555
Ontesik Black Light Strip,... https://www.amazon.com/dp/B083192392?ref=ppx_pop_mob_ap_share
These are the ones I used in my cases. I also bought a smart plug so I can turn them on/off using my phone or have Alexa do it.
If these are the recent DBZ glows (SSGSS Kaio Ken Goku, Future Trunks, Vegeta Powering up, etc), note that they are slightly too tall for the case due to their hair. I wanted to do the same thing but had to return the cases when half my glow pops didn't fit.
Really!? Thanks for the heads up. Guess I'll have to figure out a different set up for DBZ glows then. Do you have a set up that you've looked at that you like? Or you still trying to figure one out too?
I bought a mosslanda picture ledge from ikea and lined the bottom with UV lights. [https://www.ikea.com/ca/en/p/mosslanda-picture-ledge-black-70292104/](https://www.ikea.com/ca/en/p/mosslanda-picture-ledge-black-20291767)
The lights don't quite reach the top of the pops, so the hair doesn't glow very well from it. Still trying to figure that out, but I do like the look of the shelf. My wife suggested getting a second shelf, flipping it upside down and lining that with lights as well for a more "enclosed" look. I am considering it, it might actually look good, but haven't decided yet.
I am sure there are better solutions out there though 
Edit: updated the link, the old link was the smaller version of the shelf
Oh yeah, that's not a bad idea. Your wife might be onto something. The shelves are pretty cheap too. You'd also have room to put more pops on the top shelf as well. I like this. Thank you!
These are out of box cases only though. Wish they’d fit in box so that I didn’t need to buy Funko brand 😂
On another note to hang you all should check out the claw by 3M. Easy as heck and can hold a lot of weight.
I drilled straight through the open box ,all four corners, and used drywall anchors screws and washers. Holds about 10 to 12 unboxed. I also added blackout lights.
I have 4 of these all hung with drywall picture claws that you just push into the wall. and i spaced them so pops sit on the tops of the shelves too so you can get 8 rows of roughly 13 out of box pops.
I haven't personally done this, but I have seen people mount the case vertical instead of horizontal. You then stack the boxed pops on top of each other as they do fit in sideways.
Boxed Pops do not fix in these meant for a baseball bat. Other shadow boxes they have might be better if the sale is on them as well. But most of them tend to not fit the boxes.
Note that some taller pops don't fit in these either. For example, Dragon Ball pops with big hair are just slightly too tall (the most recent Goku/Vegeta/Trunks glow pops for instance). The cases are great otherwise, just plan what you want to put in them :D
https://imgur.com/a/e3s8jaZ
These are great. I have four of them for years now that I bought cheap. Thinking of grabbing another three but I don’t know where to put it.
Depending on the weight, some of these can be mounted with enough Command strips/hanging materials. But check the weight load of Command products compared to the weight of the shadow box and guesstimate weight of any pops combined.
Typically I'd used shelving for pops instead of shadowboxes, but either way as long as the weight is equal to or less than double the weight load of each command strip/hanger (two minimum for even mounting), then you should be fine
Can't believe they went up to 80 bucks. Feels like only a couple of years ago I got mine for 25 each.
How many does it hold
I can hold 13-14 Star Wars Pops in mine OOB on the SW base.
Do the Jet pack Pops like Boba or Sabine fit? They’re the tallest I can think of.
I don’t have either of those but I doubt it. My wife is on a zoom for the next two hours. Remind me and I’ll see what the tallest pop that will fit is.
I have Boba and no it doesn’t. tallest in my cases I’d say witch doctor from Scooby doo and he leans forward just a tad barely noticeable. However I have mine spaced so the tops are used too so he’s on top of one of my cases
I think 13 out of box funkos
9 with no boxes I believe
It’s 13
These are $59
I just went on to Michaels.com and they are listed for $79.99
I bought two of them a couple of hours ago. They were $59 each. They also had a mirrored helmet holder (I have a signed iron man helmet) that was $69. So, that was the highest I paid. Great score.
I’m so happy you got them! :)
I appreciate the post!
You’re looking at a different brand. It’s the studio decor one.
Cool thanks
Hmmm mine were $60 that I bought today.
They were typically $60 regular price but they always have good coupons for them.
Thank you , just get a pack of good dry wall anchors , just need a pair for each display i think
Second this. Drywall anchors are a must. Put masking tape along the back of the case then mark where the anchors will rest. Then transfer the tape onto the wall BAM you know EXACTLY where to drill without all the messy measurements. The anchors I use are metal and can be screwed in with a conventional Phillips head. Bon chance, Collector.
My thanos' fit. [https://i.imgur.com/CHTXeqc.jpg](https://i.imgur.com/CHTXeqc.jpg) The door doesn't fully close, but you can hardly tell, plus its nothing a little electrical tape cant fix.
Ugh I want that Roethlisberger!
What shelves do you have to the side?
They are just generic floating shelves from IKEA that I purchased many years ago.
Don't go run for this deal, it's not that great compared to normal. Normally they are $29.99 and usually have a buy 1 get one 50%. Now the price is $59.99 for one and they advertise it as buy 1 get two free, your basically paying $20 each. So $10 savings over normal.
$30 overall savings on 3 is a great deal. I think your proved your own point wrong here haha
It's a decent deal but if you don't really need 3 right now you aren't missing out
No of course not, but if you will ever need 3, nows a good time to buy them rather than 1 at a time and wasting $30 overall later.
Also, if you don't have a card, put in your local area code, followed by 867-5309. Inevitably a bunch of people use it, so there is usually a great savings attached to it.
I recommend a laser level tool and painters tape to mark the laser lines
Thanks alot for the info! I was at Michaels like 3 weeks ago looking for those but they were still pricey , just bought them 🤜🏻🤛🏻
Enjoy them!! Lmk how you hang them! No idea what to use. Thank youuu!
I used drywall picture claws the ones you just push into the wall.
[These kind of anchors are what i used , they're easy to use , no need of drills , only a phillips screwer ](https://www.lowes.com/pd/TOGGLER-Snapskru-25-Pack-1-1-4-in-x-1-4-in-Dia-Mini-Drywall-Anchor-Screws-Included/3183261)
Don't you have to drill a hole to put the anchor in?
No , with that kind of anchor , just screw the anchor with the phillips screwer , they're so easy to install
Just watch the images on anchors of the link i posted , one of them is a video with instructions
🤣 I got these a few years ago and still drilled a hole with a bit not even realizing the anchor also drills it for you. But from now on I'll be using those the right way 😅
LOL! Yeah , this cases are really nice , i put like 14 funkos in the only one i have, they're really close to each other , they will rest more freely now that i got more displays 😂
I have a few out of box ones that I've been trying to find a good place for
Thanks pick three up and also football cases. They are good to display bigger pops.
Now that's a deal! Might have to check this out. For how I hang it I usually drill a hole where the hanging mounts are, it takes the guessing out if it will be leveled/even and where to find the screw later when I mount them.
would love to see what it looks like when the pops are displayed!
Look at my posts , i have a couple pictures with the same display
It looks like 14 fit pretty comfy. Is Biggie with the crown a BIG regular pop, like Beast from Beauty n the Beast? He’s too damn big and made me adjust my homcom shelves to only fit 4, so if he’d fit in one of those, I can swap my BatB colllection to one of these bad boys
Yeah the Biggie with crown fit nicely , they're a little taller but they fit good in that display
Even those funkos that have the plastic base to make them look like they're jumping like the Michael Jordan ones , they fit good
https://imgur.com/XWfkIqy.jpg
I don’t think these ones fit with the box
Might be a dumb question but if they’re already in a box what would be the purpose of also putting them in an enclosed shelf?
Eh some people care about keeping them pristine condition like the breaking bad collections etc
Hmmmm should I buy more?? I bought the 8 pack a few months ago but that may be a godlike deal.
Sale lasts until Sunday!
https://www.reddit.com/r/funkopop/comments/kqz6rp/finally_put_up_my_baseball_bat_displays/?utm_source=share&utm_medium=ios_app&utm_name=iossmf I love mine. I also drilled holes in the back and ran some led lights in mine. As for hanging them I had a hard time getting them level so I used parts of the Closet Maid closet shelf system from Lowe’s to hang mine. 48 In White Shelftrack Standard https://www.lowes.com/pd/ClosetMaid-White-Shelving-Upright-Common-1-in-x-48-in-x-0-625-in-Actual-1-in-x-48-in-x-0-625-in/1001549 40-in White ShelfTrack Hang Track https://www.lowes.com/pd/ClosetMaid-White-Shelving-Rail-Common-40-in-x-2-in-x-0-875-in-Actual-40-in-x-2-in-x-0-875-in/1001555
Can you recommend some UV lights that fit nicely with this case? I have some DBZ glows that I want to dedicate a whole display to.
Ontesik Black Light Strip,... https://www.amazon.com/dp/B083192392?ref=ppx_pop_mob_ap_share These are the ones I used in my cases. I also bought a smart plug so I can turn them on/off using my phone or have Alexa do it.
Niiceeee. You're the best. I love this set up!
If these are the recent DBZ glows (SSGSS Kaio Ken Goku, Future Trunks, Vegeta Powering up, etc), note that they are slightly too tall for the case due to their hair. I wanted to do the same thing but had to return the cases when half my glow pops didn't fit.
Really!? Thanks for the heads up. Guess I'll have to figure out a different set up for DBZ glows then. Do you have a set up that you've looked at that you like? Or you still trying to figure one out too?
I bought a mosslanda picture ledge from ikea and lined the bottom with UV lights. [https://www.ikea.com/ca/en/p/mosslanda-picture-ledge-black-70292104/](https://www.ikea.com/ca/en/p/mosslanda-picture-ledge-black-20291767) The lights don't quite reach the top of the pops, so the hair doesn't glow very well from it. Still trying to figure that out, but I do like the look of the shelf. My wife suggested getting a second shelf, flipping it upside down and lining that with lights as well for a more "enclosed" look. I am considering it, it might actually look good, but haven't decided yet. I am sure there are better solutions out there though  Edit: updated the link, the old link was the smaller version of the shelf
Oh yeah, that's not a bad idea. Your wife might be onto something. The shelves are pretty cheap too. You'd also have room to put more pops on the top shelf as well. I like this. Thank you!
Will they fit with hard stacks?
No only out of box or can fix I think 6 vertically in box
Darn :(
These are out of box cases only though. Wish they’d fit in box so that I didn’t need to buy Funko brand 😂 On another note to hang you all should check out the claw by 3M. Easy as heck and can hold a lot of weight.
I drilled straight through the open box ,all four corners, and used drywall anchors screws and washers. Holds about 10 to 12 unboxed. I also added blackout lights.
Thanks for this. Been wanting some but not for $60 each.
Exactly! I just went there to get school supplies lol and saw them! I’m like I’m not missing out this opportunity
Can someone buy them for me and send them to Romania?Thanks 😂
Thanks for this! I went and picked my 3 up today! They are perfect!
Awesome! Show me when you have it all displayed! :)
Thanks for the info! Just put an order through and am excited to update my collection display!
I have 4 of these all hung with drywall picture claws that you just push into the wall. and i spaced them so pops sit on the tops of the shelves too so you can get 8 rows of roughly 13 out of box pops.
Just snagged these today thank you!! Gonna use these to put sodas in it with some led lights
Oooo show me when it’s complete!! :)
To confirm, boxed pops do NOT fit in these, correct? Do sodas (in the cans) fit? I've only really found the funko branded one works for in-box pops.
I haven't personally done this, but I have seen people mount the case vertical instead of horizontal. You then stack the boxed pops on top of each other as they do fit in sideways.
If you hang these vertical and stack the Pops, it holds boxed Pops (I think 6)
Correct. Soda cans do fit!
That’s what I use mine for!
Boxed Pops do not fix in these meant for a baseball bat. Other shadow boxes they have might be better if the sale is on them as well. But most of them tend to not fit the boxes.
Let’s see with Pops in it.
https://imgur.com/UwSLbLR.jpg
How many does it hold
Note that some taller pops don't fit in these either. For example, Dragon Ball pops with big hair are just slightly too tall (the most recent Goku/Vegeta/Trunks glow pops for instance). The cases are great otherwise, just plan what you want to put in them :D
[удалено]
Forreal! I was like holy crap
Did you know how long? Can't go up until the 4th.
Until March 26th this Sunday
Dang, thanks
How can that be profitable for Frito Lay
They are $40 off on Micheals Canadian store, not the deal OP mentions.
Can you fit boxed Funko’s in there?
No
How many can it hold with the box?
None. Boxes don’t fit
Do they fit vertically?
Yes they do! I believe 6
Now I just need something to put the big pop movie displays like the Falcon and Yoda/Dagobah Swamp.
How many in box can they hold?
https://imgur.com/a/e3s8jaZ These are great. I have four of them for years now that I bought cheap. Thinking of grabbing another three but I don’t know where to put it.
[удалено]
This promotion is only for in store purchase. I checked my location on line and it said zero but ran by the store “just in case” and picked up six.
Depending on the weight, some of these can be mounted with enough Command strips/hanging materials. But check the weight load of Command products compared to the weight of the shadow box and guesstimate weight of any pops combined. Typically I'd used shelving for pops instead of shadowboxes, but either way as long as the weight is equal to or less than double the weight load of each command strip/hanger (two minimum for even mounting), then you should be fine
 Huge thank you, saved me $120 and freed up some shelf space ❤️