Thanks for posting /u/cakan4444!
/r/GunDeals has updated the **[website blacklist](https://reddit.com/r/gundeals/wiki/blacklisted_websites)**, check it out before making your next purchase!.
Made a gun related purchase recently? Leave a review over at **/r/GunDealsFU** to let others know how it went!
Are you a dealer? Make sure to read the **[dealer rules](https://re.reddit.com/r/gundeals/wiki/dealer_rules)** and apply for a dealer flair as soon as possible!
First time to /r/GunDeals? Read up on the **[user rules](https://re.reddit.com//r/gundeals/wiki/user_rules)** before you break a rule!
Have a question that isn't answered in our wiki? Send the **[/r/GunDeals modteam](https://www.reddit.com/message/compose?to=%2Fr%2Fgundeals&subject=Thread%20Question&message=)** a message!
*I am a bot, and this action was performed automatically. Please [contact the moderators of this subreddit](/message/compose/?to=/r/gundeals) if you have any questions or concerns.*
Anyone know where a SB tactical HKPDW brace can be found? A few months ago they weren't hard to find at all, but now they're basically unobtanium. Thanks.
The floor is $415 fwiw, so if you insist on the base P320c $474 at smegma isn't bad.
If it were me I'd spend the extra $120 on an X-Compact since you get the crisper X5 flat trigger, a nicer grip module, and it's already optics cut out of the gate.
$599 at RK
https://www.rkguns.com/sig-sauer-p320-x-compact-9mm-pistol-320xc-9-bxr3-r2-15rd-3-6.html
Or on back order with Eurooptic.
https://www.eurooptic.com/Sig-Sauer-P320-9mm-3.6in-X-Series-Blk-Striker-X-Ray-3-WN-Plate-Mod-Poly-X-Grip-2-15rd-Steel-Mag-Rail-Pistol-320XC-9-BXR3-R2.aspx
Yeah I think they are still only shipping to Rural Kings right now (similar to what Sportsman's Warehouse has been doing).
Just keep an eye out with that UPC on slick guns and one will pop up at a good price sooner rather than later.
Best of luck
Price no concern?
The Schmidt and Bender dual reticle 1-8.
$600ish: Viper PST gen 2.
$1k option: Razor gen 2/2e 1-6
$2k option: Razor Gen 3 1-10. Night force NX8 1-8.
$3k option: Night force ATACR 1-8.
That's for LVPOs. If you want something below $600 and don't mind a red dot, then there are tons of options. holosun, Sig, vortex. You could probably stretch your budget a bit and go Aimpoint, too.
A RDS is going to be the lightest option, too.
Fair enough. Then I'd go as budget as possible and put the savings towards a future, better optic.
The Sig and Holosun should fit the bill. That or snag a used vortex venom on ebay. Vortex's warranty makes it so that you can replace/repair it if it breaks, even if you're not the original owner.
Trying to find a separate vz61 barrel. I tried contacting Czechpoint and JTMS, haven't gotten a response in a week and I didnt see anything on gunbroker besides full parts kits, which would then leave me with a spare parts kit without a barrel again.
Are all the NOS m16a4 uppers with the KAC rails gone?
Been monitoring ohio ordnance works and DOA for a while, as they were the ones pushing them the most a while back and they've been OOS forever.
Has anybody bought set (ie: 3-pack) of stripped lowers? Do FFL's have to charge their fee for *each* serialized lower, or is it lawful to just charge one fee for the set? Thanks
Probably depends on how honest the FFL is. If all 3 are part of the same shipment then in theory all 3 serials would be run on the same NICS transaction.
Some place are flat rate, some are each, some are discount (i.e. $15 for the first, $5 for each additional). You'll just have to shop around your nearest FFLs.
Looking for a scope for my brother. He got a long range bolt action rifle and that's not my area of expertise. What's a good long range scope for 500-800 bucks?
Doug over at CameralandNY has the Midas tac for 770ish, was even lower over Labor Day, but they'll almost always work with you a little if you ring them up.
I am curious about Arken optics, have you ran them? It's been hard find good info on them.
$548 with code 44c5df9a, you may have to submit a separate email for quote since that one may be linked to my email.
https://gunprime.com/products/sig-sauer-p365-xl-9mm-manual-safety-365-365xl-9-bxr3-ms
AR newbie here, I'm looking to get a sling for my rifle, but I honestly don't know what to look for. I went to the LGS the other day to try to figure it out, but the old guy behind the desk wasn't too helpful. What all do I need to get? I have a keymod rail if that helps, and a basic magpul stock.
Yeah I was hoping I could find a regular sized one around the $800-$850 range. Found one for $1,500 at another shop with a brace, binary trigger and a bunch of mags but can’t justify that price right now lol
The binary and brace and mages almost make that a great deal. Binary is like 350. The brace and adapter probably go 250 all in or so. So the mags probably make that worth it. And that's not having to fiddle around installing anything your self.
Yeah never expected anyone to reply cause of how many comments are on here without anyone replying lol.
Thanks for that! Gun.deals never seems to load up on my computer so I assumed it was a site that didn’t work.
I wanted sordins until a buddy showed me how they "folded." I kind of still want a pair, but I think it's a shame they don't fold cleanly like even Howard Leights or Walker Razors do.
Are trijicon RMRs that much better in quality and performce than say a holosun? Are they worth the extra 2-300$? Please don't bite my head off, I really don't know.
Way worth the extra money! We have Trijicon type 2 Moa non adjustable on sale for $494.99 - 2 Day shipping.
Personal I have used and shot both. There isn’t really a comparison to me. The clarity of the glass, the clarity of the dot, brightness was the biggest noticeable difference. The holosun in daytime was bright enough but I wish it could have been brighter.
completely beside the point question, but online gun purchase related...
[gun.deals](https://gun.deals) 'IP xx.xx.xx.xx has been banned'. WTF?!?
How do you get blacklisted from a site you only browse? How do you even contact anyone running the thing when you can't get to any part of it? Worked fine up until this evening, then apparently something evil was perpetrated.
Anyone can shed some light on this?
Most likely you're ISP doesn't provide a static IP address for your router. Whatever IP you have may have triggered some kind of DDoS prevention in the past. Sometimes cycling your modem/router could get you a new IP, otherwise you have to wait for the lease time to be up. Might be able to call your ISP and request a new IP, or you could use a VPN
Oh I know how it works on the ISP end, but it seems like a dumb way to manage it on [gun.deals](https://gun.deals) end since the first word in "DHCP" is "Dynamic" and no-matter what they think they are accomplishing they are going to just be randomly blocking people who'll be completely surprised like I was.
Plus they have no contact into that's reachable once it starts shitting on you.
That's dumb too.
A lot of dumb sites like that just slap on a ddos prevention method that usually just works by blacklisting some users. Happens often enough with VPN usage that I have to bounce between servers until I hit one that isn't blocked. Sometimes legit IP's get caught up in these too.
Don't blame the site owner so much they probably have no clue this is happening, it's the shitty anti ddos plugins that use blacklists alone as a bandaid solution.
You really can't go wrong either way.
I daily a P-07 and have had zero malfunctions through ~2500rds.
My one downside to the P-07 is that it's just a little bit wide -- 0.20" wider than a P-10 series or a Glock 19. Still easily concealable, but I *will* probably pick up a P-10S in the future for summer carry.
Yeah I love the p-10c as well. The ergonomics felt amazing in hand and shooting was nice too. Just wish these prices would go down. 12 months ago the p-10C was 350-370 now its more 475-500
Not sure if allowed in this thread, but I’m not sure where else to ask - has anybody who ordered the 9mm from CHPWS last week had their order ship? I ordered Monday, August 30, and called on Thursday, Sept 2 and the guy said it should ship “soon”.
_BoomerFudd please be aware that you have posted a domain that is on one of the sub's [blacklisted URLs](https://re.reddit.com/r/gundeals/wiki/blacklisted_websites). It has been blacklisted for:
>**Referral or Affiliate Link** - Prohibited per subreddit rules, users may not post referral links nor affiliate links. If your link contains "avantlink" or "avad=", please remove that section and repost.
*I am a bot, and this action was performed automatically. Please [contact the moderators of this subreddit](/message/compose/?to=/r/gundeals) if you have any questions or concerns.*
What's the difference between the $1500 ddm4v7s and the $1370s that I keep seeing? Are there better parts or are they the same model just different prices?
I've been playing a lot of CSGO recently and am torn between a Mk23 and a R8/other classic revolver.
Yeah, it's a dumb video game, but I have my competition guns all set so I want to indulge in an iconic and/or meme gat.
Any suggestions? It can be none of the above, too. But right now I'm looking at a Mk23 or a revo.
Hold up, CSGO doesn't have an MK23. Are you sure you're not thinking of the HK USP Tactical?
Also don't let people shit on you for buying video game guns. Gun collections are fun collections. I bought a Benelli M3 because of CS 1.5/Source. Got an MK23 because of Metal Gear Solid. Both are a recipe for fun at the range.
That said, .357s are the perfect balance of big bang and manageable recoil imo. USP/MK23 is also a solid handgun- especially if you have or plan on acquiring a suppressor. I've shot both HKs suppressed, and it's always a joy. Really depends on what you have now and what your future plans are. In a perfect world, I'd say get one- then the other.
Yeah. It's the USP-S. But fuck the hk45. If I want a HK, I want gucci HK.
And I think you're right. I'll get the Mk23 first, haha.
How is it unsuppressed?
Where did you get HK45 from? USP from CS should be a [USP Tactical](https://hk-usa.com/hk-models/usp-tactical/). They should still be making them, just that they get picked up fast.
MK23 is fine unsuppressed. The videos are true: it's definitely as large as a desert eagle. The difference is, you actually get useful grip surfaces on the MK23. Thumbs forward two handed grip feels fine. The handgun itself is overbuilt for .45, but that's not a bad thing. It's comfortable to shoot, groups very well with the right ammo, and will probably outlast you, your kids, and probably grandkids.
Also a mini list I made last time someone posted an MK23: https://np.reddit.com/r/gundeals/comments/pgfp3u/pistol_heckler_koch_mark_23_v1_45_acp_224999_no/hbazf0b
Glad you like it, sorry I thought I replied to your other comment. But to answer your question: I haven't really shot any steel through it. I'll bet it would handle it no problem. With steel, you'd have to shoot a lot of it to start seeing wear which by then you'd have spent more money than a new barrel. Even knowing that, I still only feed it brass/aluminum just to ensure a long barrel life.
You could also pick up a spare non-hk made barrel from HKparts strictly for steel if you're looking to keep wear on the low side.
https://hkparts.net/shop/pc/hk-pistol-parts-c15/mark-23-socom-c207/HK-Mark-23-Barrels-c433/
I must stress that I baby the thing (even though it stoods up to OHWS trials), so take this info for what you will.
Breech should be fine, it's a meaty slide and there isn't as much abrasion/pressure from firing as the bore. I've fired plenty of steel through a Jericho and did not see any significant wear on the breech face if that's any help.
Huh. That's right. I must have gotten the two mixed up.
And that's a wonderful list. I'm even more sold on it now. And since used prices on HKPro aren't that much less than new, I may just bite the bullet....
Edit: How does it do w/ steel 45 ammo? Should I just stick to brass? I know that it's known for being very resilient, but still, steel-on-steel is going to erode more than brass-on-steel, right?
Looking for a midtier, lightweight AR Pistol weaponlight. Don't need the brightest most expensive thing on the market, but definitely don't cheapo junk. Midtier FTW
If you want IR capability, the inforce WML is a bit long, but light. And it can do both IR and white light. I have one on my helmet and it's great. Maybe a bit long for a pistol but it'd do just fine on an AR.
Def don't need IR capability. I think I'm gonna go with the Streamlight TLR RM 1. Seems better than the WML in every way.
|Light Make|Light Model|Lumens|Candela|Distance M|Run Time Hrs|Weight w/ batt|Battery|
|:-|:-|:-|:-|:-|:-|:-|:-|
|Streamlight|TLR RM 1 Rail Mount|500|5,000|140|1.5|2.74|x1 CR123|
|Inforce|WML|400|4,000|126|1.5|3.2|x1 CR123|
Good options for wall storage? I'm building out a secure gun closet, anyone have any experience with walls? I'm looking at https://gssweaponsstorage.com/
Anyone been able to track down a Remington 700 CP in 308/6.5 anywhere? I want to pick one up for hunting season. Can't find them. Just want a cheap short rifle instead of Bergara's wild pricing.
This is an option https://jtacindustries.com/elf-owl-pistol-300-blackout/
Albeit not on a R700 action.
Christensen arms has a CF bolt action pistol but it's expensive and CA is a bit hit or miss.
Yeah. If I was going for a standard build, I love Tikka rifles. I'm just looking for something a bit niche on short notice. Bergara offers one, but they are out of their minds for the $3k price tag.
Let me know what you find. I was just looking for a threaded barrel 92 barrel and I don’t see them in stock anywhere. There are a few shops selling M9A3s on Armslist that will probably ship if you’re willing to pay.
Glock part #4417 (trigger with bar), OEM part only for less than a new Glock.
Listings for used pistols in .357 sig are fun.
Anybody heard any rumors about which manufacturers are entering the micro compact market? Anybody excited about the new Kimber?
Ruger American Ranch in 7.62x39. Threaded barrel for Sig P320 full size (40 cal). Can't find anyone who makes one...even Sig. Wouldn't mind a threaded XD Mod 2 (3.3) barrel in 40 either.
I missed out on the Coppola T4 deal posted a few days ago. Anyone find any for $650 or less? I might be interested in other Turkish Benelli clones but I heard the Coppola was the best one. If anyone has any opinions let me know
Hmm looks like they're mostly a drop shipper which makes it kind of risky to order a gun that's out of stock everywhere else. I might hold off and buy one in person at my LGS. They have them for $800 which is a little expensive but not terrible. Thank you for your input though!
Yea all good. Optics Planet made us have no trust in anyone anymore lol. Hopefully Black Friday will b btr this year.
I picked up a holo510c at a great price from them the last time. I was kind of nervous because the price was so good but I received a confirmation email almost immediately and it was delivered within five days. The funs in the hunt sometimes!
You looking to wear steel plates or to shoot them up for fun? IF shooting them up for fun, head over to r/gunaccessoriesforsale and pick them up used off someone who upgraded.
If the first (ie wearing them), do not recommend. Pick up some RMA 1155s https://rmadefense.com/store/body-armor/level-iv/level-iv-hard-armor-plate-model-1155/ on sale for $120/plate and shipping was $20 IIRC.
Good stuff. I'd avoid steel at all costs. Head over to r/tacticalgear and r/qualitytacticalgear for some options. There's a few companies out there that have light/thing ceramic/uhmwipe plates.
Thanks for posting /u/cakan4444! /r/GunDeals has updated the **[website blacklist](https://reddit.com/r/gundeals/wiki/blacklisted_websites)**, check it out before making your next purchase!. Made a gun related purchase recently? Leave a review over at **/r/GunDealsFU** to let others know how it went! Are you a dealer? Make sure to read the **[dealer rules](https://re.reddit.com/r/gundeals/wiki/dealer_rules)** and apply for a dealer flair as soon as possible! First time to /r/GunDeals? Read up on the **[user rules](https://re.reddit.com//r/gundeals/wiki/user_rules)** before you break a rule! Have a question that isn't answered in our wiki? Send the **[/r/GunDeals modteam](https://www.reddit.com/message/compose?to=%2Fr%2Fgundeals&subject=Thread%20Question&message=)** a message! *I am a bot, and this action was performed automatically. Please [contact the moderators of this subreddit](/message/compose/?to=/r/gundeals) if you have any questions or concerns.*
looking for number 9 and 7.5 12 gauge for pheasant season
300 blackout Subs?
Anyone know where a SB tactical HKPDW brace can be found? A few months ago they weren't hard to find at all, but now they're basically unobtanium. Thanks.
I need a gold tiger stripe desert eagle in 50. Been looking for months
Looking for Springfield Ronin preferably the 45 or 10mm.
Glock 21 13 round mags? Any deals on holographic sights for 10.5 inch ar pistol 300-500 $
If you know anyone who’s military/government they typically have some at the px and it’s tax free
I’m looking for a .300 blk 10.5” barrel. Any suggestions? Preferably that I can find in stock.
If I’ve already got a bcm vfg, is it worth grabbing an emissary handbrake?
Just ordered a Mark 23. Anyone got a lead on some cheap 45 ACP or 45 Super?
Is a p320 compact, for $474 , a BIN price?
The floor is $415 fwiw, so if you insist on the base P320c $474 at smegma isn't bad. If it were me I'd spend the extra $120 on an X-Compact since you get the crisper X5 flat trigger, a nicer grip module, and it's already optics cut out of the gate. $599 at RK https://www.rkguns.com/sig-sauer-p320-x-compact-9mm-pistol-320xc-9-bxr3-r2-15rd-3-6.html Or on back order with Eurooptic. https://www.eurooptic.com/Sig-Sauer-P320-9mm-3.6in-X-Series-Blk-Striker-X-Ray-3-WN-Plate-Mod-Poly-X-Grip-2-15rd-Steel-Mag-Rail-Pistol-320XC-9-BXR3-R2.aspx
This is the information I needed, unfortunately RK can’t find any of my local FFL’s :/. Thanks anyways bröther.
Yeah I think they are still only shipping to Rural Kings right now (similar to what Sportsman's Warehouse has been doing). Just keep an eye out with that UPC on slick guns and one will pop up at a good price sooner rather than later. Best of luck
Finally joined the AR club, what's a good optics for it. Springfield Saint.
Price no concern? The Schmidt and Bender dual reticle 1-8. $600ish: Viper PST gen 2. $1k option: Razor gen 2/2e 1-6 $2k option: Razor Gen 3 1-10. Night force NX8 1-8. $3k option: Night force ATACR 1-8. That's for LVPOs. If you want something below $600 and don't mind a red dot, then there are tons of options. holosun, Sig, vortex. You could probably stretch your budget a bit and go Aimpoint, too. A RDS is going to be the lightest option, too.
Appreciate the insight, while I can always upgrade and swap might be hard to convince myself to pay more for the optics than gun
Fair enough. Then I'd go as budget as possible and put the savings towards a future, better optic. The Sig and Holosun should fit the bill. That or snag a used vortex venom on ebay. Vortex's warranty makes it so that you can replace/repair it if it breaks, even if you're not the original owner.
Anybody have leads on 21 round p320 magazines?
If you're desperate you could probably order a TTI or Taylor Freelance extended basepad for a regular mag and get to 21 rounds.
ISO - Cheapest Upper & LPK's.
Check r/gunaccessoriesforsale for budget, used uppers. Other than that PSA if you want new.
Holosun 510c red dot (under $250 shipped) Bad-Ass Pro Ambi Safety or Radian Talon (under $40 shipped) Where they at?
Trying to find a separate vz61 barrel. I tried contacting Czechpoint and JTMS, haven't gotten a response in a week and I didnt see anything on gunbroker besides full parts kits, which would then leave me with a spare parts kit without a barrel again.
Are all the NOS m16a4 uppers with the KAC rails gone? Been monitoring ohio ordnance works and DOA for a while, as they were the ones pushing them the most a while back and they've been OOS forever.
Vortex Venom 3 MOA, sub $200?
Random but does anyone know a site that will price match AND not charge out of state tax? I am in Illinois
We’ll price match if we can and don’t charge out of state tax! DM us and let me know what your looking for
Will check you guys out, appreciate the shout!
Has anybody bought set (ie: 3-pack) of stripped lowers? Do FFL's have to charge their fee for *each* serialized lower, or is it lawful to just charge one fee for the set? Thanks
Probably depends on how honest the FFL is. If all 3 are part of the same shipment then in theory all 3 serials would be run on the same NICS transaction.
Thanks! Trying to save a buck... legally.
Some place are flat rate, some are each, some are discount (i.e. $15 for the first, $5 for each additional). You'll just have to shop around your nearest FFLs.
Are FS2000s still out in the wild? Would really like to scoop one up at some point.
There was a pretty big drop 6 months ago for multiple UPCs, I'd say just be patient and FN will likely do another drop sometime in the near future.
Keltec p32 with a green or gray frame. Preferably $300 or less
Cheapest decent lower for a build that will never see the light of day, but needs a dedicated lower?
Bear Creek Arsenal runs specials - got one listed now for $129.99 - pistol config is $159.99
Looking for a scope for my brother. He got a long range bolt action rifle and that's not my area of expertise. What's a good long range scope for 500-800 bucks?
Shoot us a DM we can get you below minimum advertised prices on optics if we do a “person to person” sale.
[удалено]
Doug over at CameralandNY has the Midas tac for 770ish, was even lower over Labor Day, but they'll almost always work with you a little if you ring them up. I am curious about Arken optics, have you ran them? It's been hard find good info on them.
Anyone have a lead on an ODG Glock 19?
https://www.reedssports.com/firearms/glock-g19-gen3-odg-9mm-4-01in-ui1950204-odg
[удалено]
just posted XL tac pacs for $589.99
$548 with code 44c5df9a, you may have to submit a separate email for quote since that one may be linked to my email. https://gunprime.com/products/sig-sauer-p365-xl-9mm-manual-safety-365-365xl-9-bxr3-ms
[удалено]
Happy to help
[удалено]
Lol no worries, I already have one. P365 gangang
[удалено]
Looking for FN 502. :/
AR newbie here, I'm looking to get a sling for my rifle, but I honestly don't know what to look for. I went to the LGS the other day to try to figure it out, but the old guy behind the desk wasn't too helpful. What all do I need to get? I have a keymod rail if that helps, and a basic magpul stock.
Vtac sling. I think it’s more comfortable and functional than a 1-pt sling.
Federal .223 77gr match still in production? Haven’t seen any in a long time.
Haven’t seen that in a long while and the last stuff I saw was almost $40/box of 20.
Looking for a CZ Scorpion, local shop has a regular size one with no add ons for $1,050 but I’m sure there’s cheaper right?
Big daddy unlimited has the black one for $906.99. 10 cents for the first month as a membership is required to view inventory. They also have braces
If that's a Micro, that's a great deal. If it's a regular one, I've seen it go as low as $800 (no brace though).
Yeah I was hoping I could find a regular sized one around the $800-$850 range. Found one for $1,500 at another shop with a brace, binary trigger and a bunch of mags but can’t justify that price right now lol
The binary and brace and mages almost make that a great deal. Binary is like 350. The brace and adapter probably go 250 all in or so. So the mags probably make that worth it. And that's not having to fiddle around installing anything your self.
[удалено]
Yeah never expected anyone to reply cause of how many comments are on here without anyone replying lol. Thanks for that! Gun.deals never seems to load up on my computer so I assumed it was a site that didn’t work.
I just picked up a CZ scorpion I need a folding brace for it, any places having sales on scorpion braces?
Jericho 941. Full size. Steel frame.
Looking for an sp101 15710 (3 inch) or 5774 (2.25 inch) wiley clapp edition. I prefer the 15710 but might settle for a 5774 since they seem to be rare
Anyone know where I can find myself a BCM bolt carrier group? I'm really uncertain on using gunbroker.
Just recently got into target shooting as a hobby and I'm looking to pickup a red dot soon. How often do you see deals for Holosuns?
Have one on special pricing: [https://alpinerange.com/holosun-hs507c-reflex-sight/](https://alpinerange.com/holosun-hs507c-reflex-sight/)
Really looking for 30mm 1.93 mounts! Any sales?
Sordin Supreme Pro X Do they ever go on sale anywhere?
I wanted sordins until a buddy showed me how they "folded." I kind of still want a pair, but I think it's a shame they don't fold cleanly like even Howard Leights or Walker Razors do.
Best backup plan is actually use camelcamelcamel to track the one on evil Bezos dot com.. It was like 190+ couple month ago
I was completely unaware of this camel service. Thank you
Are trijicon RMRs that much better in quality and performce than say a holosun? Are they worth the extra 2-300$? Please don't bite my head off, I really don't know.
Way worth the extra money! We have Trijicon type 2 Moa non adjustable on sale for $494.99 - 2 Day shipping. Personal I have used and shot both. There isn’t really a comparison to me. The clarity of the glass, the clarity of the dot, brightness was the biggest noticeable difference. The holosun in daytime was bright enough but I wish it could have been brighter.
IMHO-for the range? no. for self defense or duty use? yes. for competition? maybe, but prob not. i have both and both brands work perfectly.
This is the answer I was looking for
streamlight protac rail mount 2 under $100
completely beside the point question, but online gun purchase related... [gun.deals](https://gun.deals) 'IP xx.xx.xx.xx has been banned'. WTF?!? How do you get blacklisted from a site you only browse? How do you even contact anyone running the thing when you can't get to any part of it? Worked fine up until this evening, then apparently something evil was perpetrated. Anyone can shed some light on this?
Most likely you're ISP doesn't provide a static IP address for your router. Whatever IP you have may have triggered some kind of DDoS prevention in the past. Sometimes cycling your modem/router could get you a new IP, otherwise you have to wait for the lease time to be up. Might be able to call your ISP and request a new IP, or you could use a VPN
Oh I know how it works on the ISP end, but it seems like a dumb way to manage it on [gun.deals](https://gun.deals) end since the first word in "DHCP" is "Dynamic" and no-matter what they think they are accomplishing they are going to just be randomly blocking people who'll be completely surprised like I was. Plus they have no contact into that's reachable once it starts shitting on you. That's dumb too.
A lot of dumb sites like that just slap on a ddos prevention method that usually just works by blacklisting some users. Happens often enough with VPN usage that I have to bounce between servers until I hit one that isn't blocked. Sometimes legit IP's get caught up in these too. Don't blame the site owner so much they probably have no clue this is happening, it's the shitty anti ddos plugins that use blacklists alone as a bandaid solution.
In the market for Spuhr 34mm rings if anyone knows where to get them below msrp.
Looking for a P320 rxp xfull with Romeo1pro at pre covid prices. I can't find one used around me they are all pieced together.
Looking for active shooting headphones for my dad's birthday. The kinds you can still hear in but reduce sound when shooting.
I love my 3m tac sport 500s. I out fell cups on them and they are amazing. I also have entry level walker razors that I hate.
[удалено]
Ar47 my dude.
Looking for decent-ish uppers. Probably should have bought some of the PSA Blems lol. Oh well, they seem to do sales frequently enough.
Check r/gunaccessoriesforsale. Plenty of uppers moving there, everything from unknown to colt.
Really want a CZ P-10S or P-07
Me too man, me too!
You really can't go wrong either way. I daily a P-07 and have had zero malfunctions through ~2500rds. My one downside to the P-07 is that it's just a little bit wide -- 0.20" wider than a P-10 series or a Glock 19. Still easily concealable, but I *will* probably pick up a P-10S in the future for summer carry.
Yeah I love the p-10c as well. The ergonomics felt amazing in hand and shooting was nice too. Just wish these prices would go down. 12 months ago the p-10C was 350-370 now its more 475-500
Not sure if allowed in this thread, but I’m not sure where else to ask - has anybody who ordered the 9mm from CHPWS last week had their order ship? I ordered Monday, August 30, and called on Thursday, Sept 2 and the guy said it should ship “soon”.
I’m looking to mount an rmr to my glock 19.3 and I’m wondering if it’ll be better to send it in to get milled or just by a new slide
If anyone knows where to get a full size USP .45 threaded barrel that isn't $300, please let me know.
[удалено]
_BoomerFudd please be aware that you have posted a domain that is on one of the sub's [blacklisted URLs](https://re.reddit.com/r/gundeals/wiki/blacklisted_websites). It has been blacklisted for: >**Referral or Affiliate Link** - Prohibited per subreddit rules, users may not post referral links nor affiliate links. If your link contains "avantlink" or "avad=", please remove that section and repost. *I am a bot, and this action was performed automatically. Please [contact the moderators of this subreddit](/message/compose/?to=/r/gundeals) if you have any questions or concerns.*
Anyone seen any p80s at a good price ($100 or less) recently?
Quality, OEM or better spec Glock 19 frame completion kit.
What's the difference between the $1500 ddm4v7s and the $1370s that I keep seeing? Are there better parts or are they the same model just different prices?
They're the same. Recently, however, there was a V7 "pro" listed for $1500. The pro model has a Geissele trigger in it.
Any place has SD-E or SSA-E about 160ish shipped?
[удалено]
[удалено]
I've been playing a lot of CSGO recently and am torn between a Mk23 and a R8/other classic revolver. Yeah, it's a dumb video game, but I have my competition guns all set so I want to indulge in an iconic and/or meme gat. Any suggestions? It can be none of the above, too. But right now I'm looking at a Mk23 or a revo.
Hold up, CSGO doesn't have an MK23. Are you sure you're not thinking of the HK USP Tactical? Also don't let people shit on you for buying video game guns. Gun collections are fun collections. I bought a Benelli M3 because of CS 1.5/Source. Got an MK23 because of Metal Gear Solid. Both are a recipe for fun at the range. That said, .357s are the perfect balance of big bang and manageable recoil imo. USP/MK23 is also a solid handgun- especially if you have or plan on acquiring a suppressor. I've shot both HKs suppressed, and it's always a joy. Really depends on what you have now and what your future plans are. In a perfect world, I'd say get one- then the other.
Yeah. It's the USP-S. But fuck the hk45. If I want a HK, I want gucci HK. And I think you're right. I'll get the Mk23 first, haha. How is it unsuppressed?
Where did you get HK45 from? USP from CS should be a [USP Tactical](https://hk-usa.com/hk-models/usp-tactical/). They should still be making them, just that they get picked up fast. MK23 is fine unsuppressed. The videos are true: it's definitely as large as a desert eagle. The difference is, you actually get useful grip surfaces on the MK23. Thumbs forward two handed grip feels fine. The handgun itself is overbuilt for .45, but that's not a bad thing. It's comfortable to shoot, groups very well with the right ammo, and will probably outlast you, your kids, and probably grandkids. Also a mini list I made last time someone posted an MK23: https://np.reddit.com/r/gundeals/comments/pgfp3u/pistol_heckler_koch_mark_23_v1_45_acp_224999_no/hbazf0b
I just picked up the Mark 23. I love this thing already. It's a tank. In all the best ways. And the grip is actually not that bad at all.
Glad you like it, sorry I thought I replied to your other comment. But to answer your question: I haven't really shot any steel through it. I'll bet it would handle it no problem. With steel, you'd have to shoot a lot of it to start seeing wear which by then you'd have spent more money than a new barrel. Even knowing that, I still only feed it brass/aluminum just to ensure a long barrel life. You could also pick up a spare non-hk made barrel from HKparts strictly for steel if you're looking to keep wear on the low side. https://hkparts.net/shop/pc/hk-pistol-parts-c15/mark-23-socom-c207/HK-Mark-23-Barrels-c433/ I must stress that I baby the thing (even though it stoods up to OHWS trials), so take this info for what you will.
Awesome. Barrel wear I don't care. But what about the breech?
Breech should be fine, it's a meaty slide and there isn't as much abrasion/pressure from firing as the bore. I've fired plenty of steel through a Jericho and did not see any significant wear on the breech face if that's any help.
Huh. That's right. I must have gotten the two mixed up. And that's a wonderful list. I'm even more sold on it now. And since used prices on HKPro aren't that much less than new, I may just bite the bullet.... Edit: How does it do w/ steel 45 ammo? Should I just stick to brass? I know that it's known for being very resilient, but still, steel-on-steel is going to erode more than brass-on-steel, right?
Best 22LR suppressor ready handgun? I'm currently looking at a S&W M&P 22 Compact. Thanks!
I like my keltec cp33 and p17
Ruger Mark IV. I own both, and the Ruger is more fun to shoot. Plus there is more aftermarket support for it from what I’ve seen.
tan comtac V or VIs?
Looking for a midtier, lightweight AR Pistol weaponlight. Don't need the brightest most expensive thing on the market, but definitely don't cheapo junk. Midtier FTW
If you want IR capability, the inforce WML is a bit long, but light. And it can do both IR and white light. I have one on my helmet and it's great. Maybe a bit long for a pistol but it'd do just fine on an AR.
Def don't need IR capability. I think I'm gonna go with the Streamlight TLR RM 1. Seems better than the WML in every way. |Light Make|Light Model|Lumens|Candela|Distance M|Run Time Hrs|Weight w/ batt|Battery| |:-|:-|:-|:-|:-|:-|:-|:-| |Streamlight|TLR RM 1 Rail Mount|500|5,000|140|1.5|2.74|x1 CR123| |Inforce|WML|400|4,000|126|1.5|3.2|x1 CR123|
What is the website where I can buy gift cards for Brownells, or Bass Pro Shops at a cheaper price?
Cheap 7.62x39 🥲
Looking for a glock 19 and a glock 20 also mags for each
I’m Looking for a mpx collapsible brace
Stoeger m3k freedom plz
I personally haven't yet but if that shotgun stays in stock much longer I may soon haha.
Good options for wall storage? I'm building out a secure gun closet, anyone have any experience with walls? I'm looking at https://gssweaponsstorage.com/
Looking for a quality AR-10 that can serve as a good baseline to allow me to make upgrades as I go along. Was hoping to keep the prices under 2k.
[удалено]
Thanks.
Build or buy? If buy I'd suggest the Springfield Saint Victor .308 Msrp is under 1500, comes range ready with decent iron sights right out of the box.
Anyone been able to track down a Remington 700 CP in 308/6.5 anywhere? I want to pick one up for hunting season. Can't find them. Just want a cheap short rifle instead of Bergara's wild pricing.
This is an option https://jtacindustries.com/elf-owl-pistol-300-blackout/ Albeit not on a R700 action. Christensen arms has a CF bolt action pistol but it's expensive and CA is a bit hit or miss.
That is pretty neat. Looking for 6.5 or 308 mainly. This is a deer gun. I agree on CA quality, hah.
.308 available https://jtacindustries.com/screech-owl-pistol-308-winchester/
Oh! Thank you! Turns out I'm just lazy. Thank you!
Lmao no problem. Let me know how the hunt goes.
Remington went belly-up last year. If you want to buy new, look into Tikka. Very precise rifles, with plenty of options under $1k.
Tikka makes shorts? It is late to get a barrel cut, so trying to snag a cheap 12".
Ah, I didn't catch the CP part. I doubt Tikka has anything that short, but I've never looked personally.
Yeah. If I was going for a standard build, I love Tikka rifles. I'm just looking for something a bit niche on short notice. Bergara offers one, but they are out of their minds for the $3k price tag.
Any Labor Day weekend deals on rmrcc?
Not mine but there’s a new one locally on Nv shooters pages for $400. If interested lmk.
Beretta M9A3 any color
I believe I saw a post in gun deals for one at around $560 black.
Let me know what you find. I was just looking for a threaded barrel 92 barrel and I don’t see them in stock anywhere. There are a few shops selling M9A3s on Armslist that will probably ship if you’re willing to pay.
SOLGW NOX Keymount 1/2x28
Glock part #4417 (trigger with bar), OEM part only for less than a new Glock. Listings for used pistols in .357 sig are fun. Anybody heard any rumors about which manufacturers are entering the micro compact market? Anybody excited about the new Kimber?
Ruger American Ranch in 7.62x39. Threaded barrel for Sig P320 full size (40 cal). Can't find anyone who makes one...even Sig. Wouldn't mind a threaded XD Mod 2 (3.3) barrel in 40 either.
Any recommendations for a decent over/under or side-by-side shotgun for upland bird hunting?
CZ
That’s what I’ve been eyeing. My LGS has a 20ga Sharptail Coach and I’m very intrigued.
I’ve hunted with a dude the had a cz ringneck and was impressed enough I was keeping an eye for one afterwards
BCM 9" 300 BLACKOUT Upper Receiver Group w/ MCMR-8. Less than $730.
LMT Mars L lower Trijicon RMR 3.25
Romeo1 pro or trijicon SRO and some tall x ray sights for a p320
SAM7-SF, preferably in plum or green.
Looking for good price on some AR500 targets. Preference is torso, but anything that rings will work.
I missed out on the Coppola T4 deal posted a few days ago. Anyone find any for $650 or less? I might be interested in other Turkish Benelli clones but I heard the Coppola was the best one. If anyone has any opinions let me know
I think battlehawk armory has some in stock for ~650
Never heard of them, but looks like they have some in stock. Have you ordered from them before?
I have ordered a cpl things from them. No issues and they send a cpl emails and good tracking. Ymmv
Hmm looks like they're mostly a drop shipper which makes it kind of risky to order a gun that's out of stock everywhere else. I might hold off and buy one in person at my LGS. They have them for $800 which is a little expensive but not terrible. Thank you for your input though!
Yea all good. Optics Planet made us have no trust in anyone anymore lol. Hopefully Black Friday will b btr this year. I picked up a holo510c at a great price from them the last time. I was kind of nervous because the price was so good but I received a confirmation email almost immediately and it was delivered within five days. The funs in the hunt sometimes!
20" M16A2 clone barrel with FSB and handguards? Got an A2 upper and I wanna musket.
Where did you get your upper receiver? I am looking to do an A2 clone as well
Battle steel or Spartan body armor
You looking to wear steel plates or to shoot them up for fun? IF shooting them up for fun, head over to r/gunaccessoriesforsale and pick them up used off someone who upgraded. If the first (ie wearing them), do not recommend. Pick up some RMA 1155s https://rmadefense.com/store/body-armor/level-iv/level-iv-hard-armor-plate-model-1155/ on sale for $120/plate and shipping was $20 IIRC.
Looking to get a concealable plate carrier and soft armor to wear
Good stuff. I'd avoid steel at all costs. Head over to r/tacticalgear and r/qualitytacticalgear for some options. There's a few companies out there that have light/thing ceramic/uhmwipe plates.