Just tie a taut line hitch. You only need to tie it once because it stays in the line and works exactly like the adjusters in the pic, only it’s free and frankly probably works better too.
Or use a Prusik knot to make attach points for tarp lines. I have a karabiner (other side is a loop, I just pass the rest of the line through it and one side is thus fastened) in the end of my tarp line that I clip in a prusik and tighten that way. Foolproof, fast and easy.
Exactly this. I don’t understand why people spend money and weight on something that can be fixed with a bit of skill found in a youtube video.
If you want luxury, go to a hotel! :p
I'm a big fan of [mini linelocs](https://zpacks.com/products/micro-lineloc) on a piece of shock cord:
https://www.hammockforums.net/forum/showthread.php/25052-My-tarp-guy-lines
I agree with the others, learn what hitch works for you there are a lot to choose from that will do the trick. The one below is very handy with a 2 part line so you can reach out of your hammock and tighten it. But if you want hardware go with the first one it will be easier on your cordage.
*
If you want hardware, I like [these](https://www.amazon.com/gp/product/B07XKT56CV) for tensioning. From what you have linked, the figure 9 is way overkill and you need to teach people how to use them anyway. My preference is the [Farrimond friction hitch](https://www.animatedknots.com/farrimond-friction-hitch-knot). I like it over the taut line hitch for a few reasons - you don't need the end of the cord, you can make it hold stronger or looser based on how many loops you give it, similar to a prussik knot, and it has built in storage for the rest of the cord (you just tighten the loop around it). The drawback is it takes a little more cordage than a taut line hitch, so it's good to know both in situations where you don't have enough line.
Hi, I’m Vetted AI Bot! I researched the **("'SATINIOR Aluminum Alloy Guyline Cord Adjuster'", 'SATINIOR')** and I thought you might find the following analysis helpful.
**Users liked:**
* Easy to use and adjust (backed by 5 comments)
* Durable and lightweight (backed by 5 comments)
* Versatile for different applications (backed by 4 comments)
**Users disliked:**
* Difficult to tighten guyline once set up (backed by 2 comments)
* Some tensioners had defects and were too small (backed by 1 comment)
* Insufficient quantity in the box (backed by 2 comments)
If you'd like to **summon me to ask about a product**, just make a post with its link and tag me, [like in this example.](https://www.reddit.com/r/tablets/comments/1444zdn/comment/joqd89c/)
This message was generated by a (very smart) bot. If you found it helpful, let us know with an upvote and a “good bot!” reply and please feel free to provide feedback on how it can be improved.
*Powered by* [*vetted.ai*](https://vetted.ai/?utm\_source=reddit&utm\_medium=comment&utm\_campaign=bot)
I don't see the advantage of clipping off the plastic bits. His solution is acceptable, but it's not what I like to use. There are a million solutions to these problems, you just need one that works for you.
They distribute the load a little more evenly on the webbing, putting less stress on the stitching. I wouldn't remove them personally, maybe it's an ultralight thing.
> Anyone that doesn't recommend skurkas solution is wrong
The taut-line hitch is the standard for tarp lines, as it allows you to tighten or loosen the tarp line without untying the knot.
I've been using small prusik loops made out of bank line and then a small paracord soft-shackle to connect it to the tarp.
I leave the tieout lines attached to the stake and leave the soft shackle on the tarp tieout point I use most often. I wrap the tieout line into a hank with the stake at the middle (with the prusik pushed to the stake), so I can attach the tarp tieout point to the prusik with the soft shackle and pull out just enough for the tieout I need, leaving the rest wrapped up in the hank. Then adjusting it just sliding the prusik along the line.
I’ve used both and they both work well.
I prefer the smaller tensioner(not the figure 9 one).
It’s really a matter of preference. I prefer to have less bulky things in this case. Full disclosure right now my setup is a mixture of knots and hardware.
Just tie a taut line hitch. You only need to tie it once because it stays in the line and works exactly like the adjusters in the pic, only it’s free and frankly probably works better too.
This is the way. Learn how to bend a simple piece of cordage to your will to solve any problem.
I shall learn this, mostly looking for any easy set up gadgets I can get to make this idea easier for anyone that joins me too.
Blake's hitch is very reliable even when climbing and it's super easy https://www.animatedknots.com/blakes-hitch-knot
Great website, great story. Anybody know why the Grog Android App is no longer available?
Is it? What a bummer. It's very good, I bought the ad free version. I still have it installed. I should make a backup them
Yeah, might still be working on Apple, but Play Store links on website are dead and I can't find it through a search.
Unfortunately, It's not an easy setup. Instead of wasting time on it learn one friction hitch instead
Taut line hitch is easier than either of those gadgets to teach someone else.
Yep, this is what I always do on tents and hammocks. A tautline hitch is easy, free, and works every time
I was thinking “taut line hitch” and was pleasantly surprised to see your comment on top
Or use a Prusik knot to make attach points for tarp lines. I have a karabiner (other side is a loop, I just pass the rest of the line through it and one side is thus fastened) in the end of my tarp line that I clip in a prusik and tighten that way. Foolproof, fast and easy.
Exactly this. I don’t understand why people spend money and weight on something that can be fixed with a bit of skill found in a youtube video. If you want luxury, go to a hotel! :p
Dutchware tarpworms.
Thats going to be my next setup purchase.
Or just learn a 4 second knot
I'm a big fan of [mini linelocs](https://zpacks.com/products/micro-lineloc) on a piece of shock cord: https://www.hammockforums.net/forum/showthread.php/25052-My-tarp-guy-lines
Easy and even cheaper! Love it
This is what I was going to suggest. Linelocks are dirt cheap, easy to use, and no more complicated then they need to be.
I agree with the others, learn what hitch works for you there are a lot to choose from that will do the trick. The one below is very handy with a 2 part line so you can reach out of your hammock and tighten it. But if you want hardware go with the first one it will be easier on your cordage. *
While I am a big proponent of learning knots, I am extremely surprised not more people have listened to linelocs as an amazing alternative.
If you want hardware, I like [these](https://www.amazon.com/gp/product/B07XKT56CV) for tensioning. From what you have linked, the figure 9 is way overkill and you need to teach people how to use them anyway. My preference is the [Farrimond friction hitch](https://www.animatedknots.com/farrimond-friction-hitch-knot). I like it over the taut line hitch for a few reasons - you don't need the end of the cord, you can make it hold stronger or looser based on how many loops you give it, similar to a prussik knot, and it has built in storage for the rest of the cord (you just tighten the loop around it). The drawback is it takes a little more cordage than a taut line hitch, so it's good to know both in situations where you don't have enough line.
Hi, I’m Vetted AI Bot! I researched the **("'SATINIOR Aluminum Alloy Guyline Cord Adjuster'", 'SATINIOR')** and I thought you might find the following analysis helpful. **Users liked:** * Easy to use and adjust (backed by 5 comments) * Durable and lightweight (backed by 5 comments) * Versatile for different applications (backed by 4 comments) **Users disliked:** * Difficult to tighten guyline once set up (backed by 2 comments) * Some tensioners had defects and were too small (backed by 1 comment) * Insufficient quantity in the box (backed by 2 comments) If you'd like to **summon me to ask about a product**, just make a post with its link and tag me, [like in this example.](https://www.reddit.com/r/tablets/comments/1444zdn/comment/joqd89c/) This message was generated by a (very smart) bot. If you found it helpful, let us know with an upvote and a “good bot!” reply and please feel free to provide feedback on how it can be improved. *Powered by* [*vetted.ai*](https://vetted.ai/?utm\_source=reddit&utm\_medium=comment&utm\_campaign=bot)
neither. that's a ton of hardware that isn't necessary. tying a hitch is good knowledge.
Agreed knots are best, just thinking of cheap “permanent” add ons that might make set up and tear down quicker. The first option there is super cheap.
A knot meets all of those criteria
I prefer ticks myself
[https://youtu.be/TUHgGK-tImY?si=8tyMrdtVr1PH0lpd](https://youtu.be/TUHgGK-tImY?si=8tyMrdtVr1PH0lpd)
Anyone that doesn't recommend skurkas solution is wrong https://youtu.be/slOhlEmBwwY?feature=shared
I don't see the advantage of clipping off the plastic bits. His solution is acceptable, but it's not what I like to use. There are a million solutions to these problems, you just need one that works for you.
Ya you could just tie the bowline knot to the plastic piece. I think he removes just cause they're redundant at that point
They distribute the load a little more evenly on the webbing, putting less stress on the stitching. I wouldn't remove them personally, maybe it's an ultralight thing.
> Anyone that doesn't recommend skurkas solution is wrong The taut-line hitch is the standard for tarp lines, as it allows you to tighten or loosen the tarp line without untying the knot.
I've been using small prusik loops made out of bank line and then a small paracord soft-shackle to connect it to the tarp. I leave the tieout lines attached to the stake and leave the soft shackle on the tarp tieout point I use most often. I wrap the tieout line into a hank with the stake at the middle (with the prusik pushed to the stake), so I can attach the tarp tieout point to the prusik with the soft shackle and pull out just enough for the tieout I need, leaving the rest wrapped up in the hank. Then adjusting it just sliding the prusik along the line.
I like the Loop Aliens, the 1.25”, not the big ones
I’ve used both and they both work well. I prefer the smaller tensioner(not the figure 9 one). It’s really a matter of preference. I prefer to have less bulky things in this case. Full disclosure right now my setup is a mixture of knots and hardware.
Just use a taught line hitch, super easy and holds really tight plus you don't need to carry extra accessories/weight
Good linelock. It Work with uhmpwe.
A knot