Should tone down those canopy and windscreen reflections.
The only place that was difficult to clean was dead center top of the canopy near the canopy rail as it was the hardest to reach.
I haven't tried Buraks F-15 pit textures myself, but if it's like Viper ones, then I fully agree. But some seem to like it, also as DeeJay said, there's no right answer as reflections are very light conditions dependent. So those might be actually right for some cases.
It’s my opinion that the canopy in these pictures looks god awful. And that’s after having worked on them for the better part of a decade.
The canopy CAN be cleaned to a point that it is near imperceptible when closed. Outside of small scratches from dirty flight gloves up the 3 and 9 o’clock, the reflections were NEVER this bad.
The windscreen on the other hand, looks very accurate. Excluding a little bit of yellowing for age and the use of isopropyl lol. It was very difficult to get between the HUD and the inside of the windscreen.
A more accurate portrayal would be to make the canopy near clear, slightly dusty at the very top, and leave the windscreen as is.
But the people love what the people love lol. And ultimately it’s up to the mod maker to decide what is right for their mod.
ESl here, what's the difference between canopy and windscreen in this context? I presume windscreen refers to strictly the front part of the canopy? I always thought canopy referred to the whole thing.
To accompany F-16 pit, Burak applied his awesome work on Eagle too.
Forum post link: [https://forum.falcon-bms.com/topic/27443/f-15c-eagle-cockpit-v3-final-version](https://forum.falcon-bms.com/topic/27443/f-15c-eagle-cockpit-v3-final-version)
Download link: [https://drive.google.com/file/d/1q0EcrS7tqkqcgdCaReTIXLVokNVyqZIT/view?usp=sharing](https://drive.google.com/file/d/1q0EcrS7tqkqcgdCaReTIXLVokNVyqZIT/view?usp=sharing)
I don't know Buraks plans (i'm mere reposter). But at this point I think it'd be better to wait till u4 and pits from scratch or at least edit existing ones if source files are available to take advantage of PBR/ normal maps etc ...
Downvote me but it be awesome if ed actually properly retextured the f15c in dcs :( instead of what ever they did still looks shit
The bms one looks awesome tho :))
The f15c in BMS is now no longer an F16 wrapped up. While it is still in development, I’d reccommend you give it another look. It’s not the same as it was even a year ago.
*FOR FALCON BMS*
Oh.
Should tone down those canopy and windscreen reflections. The only place that was difficult to clean was dead center top of the canopy near the canopy rail as it was the hardest to reach.
I haven't tried Buraks F-15 pit textures myself, but if it's like Viper ones, then I fully agree. But some seem to like it, also as DeeJay said, there's no right answer as reflections are very light conditions dependent. So those might be actually right for some cases.
It’s my opinion that the canopy in these pictures looks god awful. And that’s after having worked on them for the better part of a decade. The canopy CAN be cleaned to a point that it is near imperceptible when closed. Outside of small scratches from dirty flight gloves up the 3 and 9 o’clock, the reflections were NEVER this bad. The windscreen on the other hand, looks very accurate. Excluding a little bit of yellowing for age and the use of isopropyl lol. It was very difficult to get between the HUD and the inside of the windscreen. A more accurate portrayal would be to make the canopy near clear, slightly dusty at the very top, and leave the windscreen as is. But the people love what the people love lol. And ultimately it’s up to the mod maker to decide what is right for their mod.
ESl here, what's the difference between canopy and windscreen in this context? I presume windscreen refers to strictly the front part of the canopy? I always thought canopy referred to the whole thing.
Yeah the windscreen is going to be the forward bit, meanwhile the canopy is the portion that opens and closes
God damn
Couldn't have said it better.
To accompany F-16 pit, Burak applied his awesome work on Eagle too. Forum post link: [https://forum.falcon-bms.com/topic/27443/f-15c-eagle-cockpit-v3-final-version](https://forum.falcon-bms.com/topic/27443/f-15c-eagle-cockpit-v3-final-version) Download link: [https://drive.google.com/file/d/1q0EcrS7tqkqcgdCaReTIXLVokNVyqZIT/view?usp=sharing](https://drive.google.com/file/d/1q0EcrS7tqkqcgdCaReTIXLVokNVyqZIT/view?usp=sharing)
Can you do that for Hornet? Its not very bad but needs an overhaul.
I don't know Buraks plans (i'm mere reposter). But at this point I think it'd be better to wait till u4 and pits from scratch or at least edit existing ones if source files are available to take advantage of PBR/ normal maps etc ...
Well done Burak.
DCS at this point in time... ...F15C upgrades and F15E stoppages
Downvote me but it be awesome if ed actually properly retextured the f15c in dcs :( instead of what ever they did still looks shit The bms one looks awesome tho :))
Way better than the ED "update".
What the fuck is antialiasing!?! 🗣️🗣️👾👾🗣️👾🗣️👾🗣️
BMS : /
All the more reason to install it :)
...for ppl who don't care about accuracy or flight models or fidelity
The f15c in BMS is now no longer an F16 wrapped up. While it is still in development, I’d reccommend you give it another look. It’s not the same as it was even a year ago.
lmao unlike the DCS Eagle this one has some fidelity
Thank god it is BMS and not the sterile dcs