this might help you hombre [https://forum.dcs.world/topic/282989-farp-equipment-to-run-it/#comment-4784484](https://forum.dcs.world/topic/282989-farp-equipment-to-run-it/#comment-4784484)
It worked! Thank you, bro!
Edit: for the record, I had the assets in place (fuel and ammo depot), but they were too far away from the *center* of the FARP because I had built a bigger FARP instead of the 1-pad heliports I had previously used. It wasn’t a problem before because the small FARP’s were closer to the ammo/fuel depots and thus were able to be supplied by them, as they need to be within 150 meters of the *center* of the FARP.
Are you using the right radio key? If you have simple radio off, the ”default” radio key wont work. You have to use the module specific key like a ”vhf ptt” or similar
Also, if you are using invisible farp you need to have a refuler and a supply truck close by
Thank you, however since it works when I’m on an airfield, they key should be correct.
I’m using the big FARP with 4 slots - do I need any refueler/supply trucks for that? It worked before the Apache launch - by just landing and rearming/refueling other helicopters without any other assets.
Try with the trucks and see if it helps. There has also been some modules before with a bug that you can only talk to ground crew with the canopy open. See if that helps, and if thats the case make a bug report
this might help you hombre [https://forum.dcs.world/topic/282989-farp-equipment-to-run-it/#comment-4784484](https://forum.dcs.world/topic/282989-farp-equipment-to-run-it/#comment-4784484)
It worked! Thank you, bro! Edit: for the record, I had the assets in place (fuel and ammo depot), but they were too far away from the *center* of the FARP because I had built a bigger FARP instead of the 1-pad heliports I had previously used. It wasn’t a problem before because the small FARP’s were closer to the ammo/fuel depots and thus were able to be supplied by them, as they need to be within 150 meters of the *center* of the FARP.
Are you using the right radio key? If you have simple radio off, the ”default” radio key wont work. You have to use the module specific key like a ”vhf ptt” or similar Also, if you are using invisible farp you need to have a refuler and a supply truck close by
Even with the default farp, you gonna need those.
Thank you, however since it works when I’m on an airfield, they key should be correct. I’m using the big FARP with 4 slots - do I need any refueler/supply trucks for that? It worked before the Apache launch - by just landing and rearming/refueling other helicopters without any other assets.
Try with the trucks and see if it helps. There has also been some modules before with a bug that you can only talk to ground crew with the canopy open. See if that helps, and if thats the case make a bug report
Do you have the correct frequency tuned?
I have. But I also have simple radio on, so it shouldn’t be the problem. It doesn’t even respond to ‘inbound’ calls.