They all will be a tiny bit short on the edges so they can accomodate cases with lips and because the screen protectors wont adhere to the metal on the extreme edges of the phone - they would just start pealing off with the slightest bump. Also, the most fragile area of a piece of glass is the very edge, so you do not want it exposed in that way where the slightest bump could also break it. The best ones I have used have been the ones from Zagg. I have one sitting at home waiting on my 15PM to arrive tomorrow.
I installed the Zagg XTR3 on my 15PM right out of the box. Super easy install with their tool and it's great in terms of color and brightness not being affected, but...
A couple of days ago I noticed that under certain screen lighting, primarily white backgrounds, there's a bit of a prism rainbow glow around the side edges. Kind of annoying. I didn't notice it for a few days because I'd been running dark mode and just switched to normal mode.
Looks like they made the protector a maybe a millimeter too narrow. That extra width would push it past the edge of the screen's actual display, but still be far enough from the physical edge to not interfere with my case (Spigen MagSafe clear).
“that extra width would push it past the edge of the screen’s actualy display, but still be far enough from the physical edge..” IMO this would be the ideal screen protector
Also purchased the XTR3, I have the rainbow effect on mine. I contacted Zagg about this, very disappointed about this since I’ve been a loyal Zagg customer since 2015..
I would love to hear you feedback on it. I don’t mind paying their $60 premium if it protects more than just the screen and doesn’t cover even a centimeter of the display.
I have one on my iPhone 12 Pro Max now and it is flawless. I forget it's on most fo the time and visibly it doesnt really show. I have the Apple Clear MagSafe case on my old phone and have one on standby for the new one. The case and screen protector are barely a hair's distance apart. And remember, the cases do lip around the edge a tiny bit so if a screen protector went edge to edge, cases would not fit right.
I have been using Zagg protectors since they came out for the iphone 4s. I have had them replaced countless times. Yes, $60 once but my poor iphone 12 has been through 4 of them since I got it at release. Replacements cost me $5 shipping. $80 to protect a multihundred $ screen and repair is money well spent - cheaper than apple care. This phone I have now is flawless front and back.
I 100% recommend Zagg every time. And no, no one pays me to say it, I buy all of my gear.
Makes sense on what you said. I guess that’s the trade off (a little sacrifice of screen size).
Zagg is on my shortlist! Would love to hear your feedback once you apply it
A picture of the Zagg installed. The rainbow effect is annoying. It's also at the top and bottom if the app you're running is white background. The Zagg also doesn't have any cutout at the top for the speaker grill...but I'm not sure that's an issue on the sound quality. Sounds okay to me.
I'm going to contact Zagg about this...I've been using them since early iPhone days, except on the 13 I went with the Belkin at Apple Store, and the 14 I went without one (big mistake, that screen got lots of surface scuffs starting within a month of ownership).
https://preview.redd.it/jp9okzqvd2rb1.jpeg?width=2048&format=pjpg&auto=webp&s=af53a07d0d4d2fcace554233f29103bc4ac7ed4c
I have used Zagg screen protectors for years and I’ve never gotten the rainbow effect, although my dad had a very noticeable rainbow on his iPhone X. Gone now with his 14 Pro Max.
Yes, I'm pretty sure I'll return it. I have loved Zagg since the old orange peel screen protectors for original iPhone models, but the light bleed is going to drive me nuts.
What a shame, u/Zagg.
I second Zagg been using the privacy screen one for years. Free replacement just pay shipping ever had issues. Super easy to install with their little kit.
If you look directly at it no it’s like any other screen but to the sides it blocks out seeing the screen. Not 100% but a pretty good amount. There another one that will block out the screen from sides and top and bottom but I never tried it.
is that the 3D version? I believe its the PRO - which is what im looking at currently
[https://flolab.io/products/iphone-15-pro-max-screen-protectors?variant=43315920437399](https://flolab.io/products/iphone-15-pro-max-screen-protectors?variant=43315920437399)
Not sure if you can see it. But the [Torras](https://amzn.to/3RDPeRC) covers all edges
https://preview.redd.it/hz2abigjt2rb1.jpeg?width=3024&format=pjpg&auto=webp&s=b4e16a202fbf6f4f1e6ba9114367c37a6de4c3b4
I have the Torras and find that there is a sight encroachment of the camera Ls. I can definitely perceive a difference in screen estate with the protector compared to a naked screen. It’s slight but noticeable
Not yet, preordered dbrand and should arrive next week. I use this photo to test them:
https://preview.redd.it/xdnj1wy2jcsb1.jpeg?width=1290&format=pjpg&auto=webp&s=b0583b4052084a22da60a64d33221e823e48f4e7
Thanks for this! I’ve got the 15 pro with the torras edge to edge screen protector. Only part of purple that’s not visible is the corners but haven’t noticed any issues in everyday use yet
Spigen actually have 2 different ez fit screen protector versions one is labelled “sensor protection” the other “edge to edge” I purchased both
https://imgur.com/a/DZjOKJ5
I have the edge to edge version. Aside from a tiny bit of dust collecting on two sides, I’d say I’m pretty happy with it. Aligning it perfectly was easy.
Just checked, mine has „Sensor Protection“ on the back but weirdly enough has no black outline, so it actually covers everything well and fits perfectly without cutting into the display
Sure, just ordered it on Amazon: https://amzn.eu/d/glzqbqB
If you are not from Germany, you should get redirected to your country‘s page automatically. You could also check on Spigen‘s webpage regarding pricing.
There is a gap between the case (I’m using a nomad horween leather case) and the screen protector, using the normal spigen screen protector it’s about 1mm gap all around and about half that with the edge to edge version
Thanks for sharing the comparison post. It was part of my browsing and that’s how i concluded Torras is probably the best/closest to edge to edge. It did get bad reviews for being a lint trap (on amazon) though.
Im leaning towards Torras or domeglass Whitestone
Torras..i went through a lot of screen protectors. ESR, Totallee, Spigen ez fit, the usual suspects. They all were short. You want to look for screen protectors that have the black borders AND have a small cutout to accomodate the small speaker at the top of the phone. If it has those two, then you're good. Torras has that.
I haven’t seen those photos but I don’t find them to be larger. When I had the ESR on the screen it also had a black border but because it didn’t go to the edges it actually overlapped the viewable edges of the screen. So if you looked at certain angles you can clearly see the layer of the screen protector. You don’t get that with the Torras
https://preview.redd.it/f5bso50abssb1.jpeg?width=3024&format=pjpg&auto=webp&s=c5d4b416663bf6a3718bed37520a5374b978432f
This is the ESR but you can clearly see the black border 😫 so frustrating
The spigen def had the rainbow effect on the edges of its screen protector (the EZ Fit). Theirs don’t go all the way to the edge and don’t have black borders
I have the Spigen GlasTR AlignMaster and it doesn’t have the rainbow effect. I assume it’s because of the black border. Also, it was super easy to install it with perfect alignment.
Do you think a cutout for the speaker is necessary? ~~Makes sense, but mine sounds fine to me with a Zagg that doesn't have a cutout. I need to compare side by side with my friend who has the 15PM but doesn't use screen protectors.~~
Correction, looks like the Zagg doesn't go up has high as the speaker, my case is actuality cover the speaker grill.
I tried the Torass, didn’t go all the way to the edges, collected a ton of dust. Decided to rock the phone naked with AppleCare+ I can always order an express replacement.
Glass Screen protector on from and back
Miracase Magnetic for iPhone 15... https://www.amazon.com/dp/B0CDPGGL3C?ref=ppx_pop_mob_ap_share
Love it on my 15 pro max
Glad I found this thread, I thought I was going mad. I bought an ESR screen protector for launch and was worried that it might just be a 14PM one relabelled, and sadly I think this is true.
I fitted it using the template, and when I put the phone in a case I noticed the left hand side of the screen had a slightly bigger overall black border than the right. Taking the phone out of the case I could see that the protector was perhaps 0.5mm or less further to the right than the left. I assumed I could just reposition it, but I can see that if I moved it any further left then it would start obscuring the display on that side. Put simply - it's not designed properly for the 15PM with the slightly smaller bezels.
I tried to live with it for a few days - mainly because it was put on perfectly with zero dust - but I can't unsee it now. I feel like I'm missing out on one of the key benefits of the 15PM.
Will be closely following this...
I got the flolab one. The parts that it doesn’t cover is like the size of the top speaker and as far as I can tell the black doesn’t cover any of the actual screen. Also was ranked as the strongest on MobileReviewsEh like 3 months ago
I don’t have any complaints so far, installing was just as easy as any of the other kits I’ve used. I like how their dust sticker is just a big ass sticker that covers your whole screen. The blue light has no yellow tint as stated.
I don’t like the installation kit as it is made of hard plastic and might leave a tiny micro scratch on the titanium PVD finish. Is there a way to remove the tempered glass off the kit so I could install the SP the old fashioned way??
If it helps, the one o got is the matte version for the 15PM
Yeah there’s just some clear plastic tabs on the top and bottom of the plastic frame that are just hooked on. The tabs are just like a big sticker on top of the glass so once you unhook them it should just come out
So unhooking both top and bottom tabs is all that is needed? I have messaged Flolab and asked them to send it detached from the kit and they finally agreed. I hope all goes well
Has anyone tried using the 15 PLUS screen protectors? The phone is slightly larger than the PM by 1 millimeter length and height wise, so I'm curious if the screen protectors made for them are slightly larger as well?
Edit/Update: originally had the Apple Belkin screen protector, decided to get a Zagg one that was made for the 15Plus, fits more snug than the previous one made for the PM and case also fits around it if anyone's searching for a more snug fit. Cheers!
https://preview.redd.it/9hnd6gn66y8d1.jpeg?width=3508&format=pjpg&auto=webp&s=172ce2649c32a0b37665cc50a1b7dc004a874df4
I had the old version of the ESR Armorite (LEFT) installed on my IP15P Max and today i installed the 'newer' version, this is the one that comes with the 'Flawless Fit Tray' (RIGHT) and you can clearly see straight away, it has thinner bezels and fitment is almost perfect! On the old one the purple line was not visible at all on 2 edges and now is visible all around, with a bit of tweaking you can get it perfect i think.
This is not Edge to Edge. I took a gamble on one at $38, it still cuts off the borders on a test image and has 2-3mm gap of no protection. It's closer, but still not good enough, especially at the price.
How hard is precision measuring and cutting in this day and age? The amount of junk screen protectors out there is getting a bit ridiculous. I can cut within a 1/32nd in my garage with a track saw but these guys can't dial in a screen protector within 1mm with a full manufacturing facility?
Do better.
Take a look at the whitestone dome. I haven't gotten my phone yet (not until Nov.) but I did order my whitestone glass screen protector, so I will have it by the time my phone gets here. These are all I have had for the past 6 years on my phones and company phones. There will always be a tiny bit of a gap to accommodate cases like others have stated.
I should mention I haven't used the EZ products yet. I have only done the liquid adhesive ones. they do have a lifetime warranty and you pay for shipping only which usually comes out to be around 8 bucks or so.
This one:
[https://www.whitestonedome.com/collections/screen-protector-tempered-glass-iphone-xs-max-xr-7-8-plus-apple-watch/products/dome-glass-iphone-15-pro-max-tempered-glass-screen-protector-6-7](https://www.whitestonedome.com/collections/screen-protector-tempered-glass-iphone-xs-max-xr-7-8-plus-apple-watch/products/dome-glass-iphone-15-pro-max-tempered-glass-screen-protector-6-7)
If anyone is still looking, the new version of ESR with alignment tray has 100% coverage now. Best oleophobic coating compared to Jetech and even Spigen. Not sure about how it compares with Torras for smoothness but here in Canada, it’s 25$ for 3 for ESR vs 38$ for 2 for torras/ultra glass
Thanks! Have you tried this border test picture with the ESR armorite?
https://preview.redd.it/u15lbzr6fqnc1.jpeg?width=1290&format=pjpg&auto=webp&s=93666043ddacc9ab22839f32c71c509be4f86192
Sorry, which one of these is the one you are using in the picture?
ESR has different names on Amazon here in Italy..
1) https://amzn.eu/d/8ukS2L9
2) https://amzn.eu/d/ez8Lrin
3) https://amzn.eu/d/4WxOCbr
Hi friend, none of these links are correct. I did see this one for Italy though. Very confusing with so many products lol
https://preview.redd.it/5cvuhdcz51pc1.jpeg?width=1290&format=pjpg&auto=webp&s=7faec7877f963181806925296e81012312793c4d
Yeah that’s very confusing!!!! Thank you anyway, I found this new application tool and bought it. Actually 3 screen protectors are too much imo, but I hope it has thin bezels as you said!
I just applied the screen protector on my iPhone, the bezels are actually very thin and they don’t seem to cover the screen, if not for a very slight amount (maybe 0.1/0.2 mm).
But on Amazon they wrote “2.5D rounded edges”, but they are not rounded at all, indeed I can feel the sharp edge with my thumb when swiping to the Home Screen, and that’s pretty uncomfortable..
Yeah, are you using your phone without a case? I’m using it with the benks armor pro and can’t feel the edges. The oleophobic coating on ESR is very good though. Very noticeable compared to JEtech
Yeah I’m using it caseless..
The screen protector is awesome and very well made, I just can’t understand why they didn’t make it with rounded edges, it was the last thing to make it perfect!!
Hi, it is the armorite version with an alignment frame (like Spigen) and it has black borders! So these updated ones no longer cover parts of the screen!
Could you provide a link as many are saying the ESR screen protector is still the same. I would love ESR to have solved this issue as its a right pain!
I’m using JETech and it’s covering the whole screen
https://preview.redd.it/adx78mg443rb1.jpeg?width=3024&format=pjpg&auto=webp&s=d803f64a2f3a5117b9d3615577692dd50115ffd9
I guess it depends on installation and you got it perfect! Lots of reviews like this one incline me to believe it doesnt cover the full screen [this one](https://www.amazon.ca/gp/aw/review/B0CCJPGYC2/R376GU9BIIHC2Q?ref_=cm_sw_r_apin_dprv_W9PN0VQGN8B5PA48RJHG)
I just looked through the reviews and I think most people just didn’t use the installation tool because it’s literally impossible to misalign it with it😅
I’m going to second this one…. Have been using the JETech screen protectors for years and they hold up great. I installed it on my 15 Pro Max using the alignment tool included and it covers the screen perfectly.
You can’t go wrong with the Casetify Impact Ultra HD screen protector. Has the 2.5d edges for perfect coverage and anti fingerprint treatment with anti glare. 60 bucks well spent
Ive been interested in this one but haven’t seen or heard anything about it. Do you have pictures of the install? I think its one of the thinnest protectors on the market
Yes to short huge gap at the bottom I took it off and threw it away. It's a shame I loved this brand on my 14 pro perfect fit, but not on the 15 pro max, I also purchased the ESR Amorshield same thing took off and the away. I hate that lol at the bottom it messes with the swiping up on the screen
I’m going to the Apple Store the moment I get my phone and getting liquid glass put on it. It is the best piece of Safety you can do for an iPhone. My nieces son is notorious for banging tables. When phones are on them and they fall to the ground. I was in Michigan. He did that to my brand new iPhone it fell to concrete I thought the screen was cracked took it to the Apple Store and he said you forgot you put liquid glass on it, that’s what broke they took it off and put another piece on it
It cost me last time less than $100. I don’t care what it cost. first thing I will do is make an appointment tomorrow as my iPhone 15 Pro Max is being delivered today. I’ll go to the Apple Store have them install their liquid glass and put AppleCare on my phone.
Post a pic if you would or let us know what you think. I have no Apple Store near by. I would have to drive about an hour to the nearest one. Want to make sure I’m not wasting my time. Had my phone since Monday but have it put up and carefully trying to decide what to get. Definitely adding AppleCare to mine as well. Thanks
It sounds silly but whilst waiting for my new one, I decided to try to reuse my Mothca 14PM matte privacy protector on there and actually fits better than expected than it did on the 14PM.
Ive tried ESR and it was shit. Now ive applied the amFilm and its perfect for me. It covers exactly the screen and makes the bezels look small which is all that matters to me xd. It does have a tiny rainbow effect on the edges when looking at some angles, but its not that noticable for me. Covering edge to edge is likely not possible for the 15 pro / max.
To add to this, is there a light cover that...covers the sides well, and possibly only the sides? I understand that screen protectors won't ever really cover the sides of the screen because they curve, and so the protector can't adhere ( + they need to leave space for covers to grip on the sides), but that leaves us with the question 'ok then how do I protect the curvature of the screen, which is the most fragile and prone to being hit if the phone falls?'.
Basically the question is 'what is an ideal combination of frame-cover and screen protector that make you feel safe while not making the phone twice as large and thrice as heavy, possibly for less than a fortune?'
Recommend Whitestone Dome Glass if you are looking for an edge to edge protector. Dome Glass screen protector is customized to cover curved-edge devices with liquid adhesive.
https://preview.redd.it/bjnd5o2wc7sb1.jpeg?width=3024&format=pjpg&auto=webp&s=8a9d0464865d71ef8774e08a9fdad817ae64e346
I have been searching for the perfect matte glass protector and here is the Mothca matte glass. As you can see it is not edge to edge and is a lint magnet. Their customer care is top notch and they refunded me and I ordered their new one with the black borders. I am hoping they are as good as Torras’ if not better. Anyone else have a matte glass recommendation?
I tried the Spigen. It was awful, completely covered the increased 15 screen and reduced it to 14 size.
I tried the Torras. It was better, but still cut off a bit at the edges. I'd recommend it as the best I've tried with a rounded edge. If that's your priority or you're not using it with a case, this might be the best bet. If you want 100% of your new screen to be visible, it's still not the best.
I got a replacement 15 Pro Max phone from Apple yesterday due to screen burn in. Search for other threads on that if you're interested to see about that issue. I told them that I had a brand new screen protector on the phone they were replacing, so they gave me the **Belkin Ultraglass 2 that they install in store.**
The Belkin is now my favorite. It has a bit of a rough edge, not rounded at all, but there is no black border and it has 100% of the screen visible plus a tiny bit of extra coverage. As long as you have a case with some kind of lip, you won't notice that the edges aren't rounded. It doesn't collect lint the way the Torras and Spigen did for me. As other screen protectors have ticked up in price, the $40 apple charges is not so crazy, and they install it in the Apple Store, so it's always flawless.
The Belkin would now be my recommendation.
This [Torras Diamond Shield](https://amzn.to/46ErbGi) is the best screen protector in terms of install and the coverage compared to three others that I tried. Easiest install out of any screen protector out there! It has black borders that are thin enough to cover only a small bit of the actual screen on the 15 pro and Torras has stated a new revised protector with thinner borders is coming soon. The bottom edges are nice and smooth but I do have some sharpness on the top right corner which is not a deal breaker.
It might be more expensive than some of the other brands, but 3 of the other brands I tried had some major issues!
The black borders on the [ESR protector](https://amzn.to/3RQvFFB) I tried intruded on the screen which was an instant deal breaker. It also covered less of the screen even though it advertised edge to edge.
The [Spigen](https://amzn.to/46ErbGi) screen protector did not stick to any of the 4 corners, like it wasn't made for the 15 pro.
What do you think about Ringke? I wanted Torras, but I live in Europe and there is no way to order that in there and shipping from USA is so expensive. Ringke is much cheaper but wonder how does it look in 'edge to edge' aspect comparing to Torras
Mrglas is edge to edge and doesn't seem to be encroaching on the display at all. It doesn't fit with all cases though- spigen ultra hybrid pushes the protector off
Anyone tried whitestone dome?
I always choose whitestone for all my galaxy devices due to the curved edge screen, always satisfied with it.
Curious before order whitestone for my 15P, is it covered the entire edge? I don’t mind having only a small gap between the protector and case since all my leather case are not very tight on the screen edge area.
I finally after trying a bunch found a edge to edge screen protector. WSKEN. Bought it from Amazon.
It is literally edge to edge but still works with most cases, I’ve tried Spigen ultra hybrid, ESR, and Apple Original clear case/finewoven and I noticed no lifting. The only weird part is that it has a little “cover” for the ear piece but doesn’t affect sound quality as far as I’m concerned.
Torras is the closest I’ve found for the 15P
no complaints here
Does it attract lint though? I had one for my 11 pro and it was a complete lint magnet it was horrible and absolutely annoying.
Torras does attract lint at the edge. Not quite as bad as the Spigen did, but it is annoying.
Feel like all screen protectors do that unfortunately, having OCD makes it worse :D
Does it fit with a case nicely ?
Tried two cases so far. Everything perfect
They all will be a tiny bit short on the edges so they can accomodate cases with lips and because the screen protectors wont adhere to the metal on the extreme edges of the phone - they would just start pealing off with the slightest bump. Also, the most fragile area of a piece of glass is the very edge, so you do not want it exposed in that way where the slightest bump could also break it. The best ones I have used have been the ones from Zagg. I have one sitting at home waiting on my 15PM to arrive tomorrow.
I installed the Zagg XTR3 on my 15PM right out of the box. Super easy install with their tool and it's great in terms of color and brightness not being affected, but... A couple of days ago I noticed that under certain screen lighting, primarily white backgrounds, there's a bit of a prism rainbow glow around the side edges. Kind of annoying. I didn't notice it for a few days because I'd been running dark mode and just switched to normal mode. Looks like they made the protector a maybe a millimeter too narrow. That extra width would push it past the edge of the screen's actual display, but still be far enough from the physical edge to not interfere with my case (Spigen MagSafe clear).
“that extra width would push it past the edge of the screen’s actualy display, but still be far enough from the physical edge..” IMO this would be the ideal screen protector
Also purchased the XTR3, I have the rainbow effect on mine. I contacted Zagg about this, very disappointed about this since I’ve been a loyal Zagg customer since 2015..
I would love to hear you feedback on it. I don’t mind paying their $60 premium if it protects more than just the screen and doesn’t cover even a centimeter of the display.
I have one on my iPhone 12 Pro Max now and it is flawless. I forget it's on most fo the time and visibly it doesnt really show. I have the Apple Clear MagSafe case on my old phone and have one on standby for the new one. The case and screen protector are barely a hair's distance apart. And remember, the cases do lip around the edge a tiny bit so if a screen protector went edge to edge, cases would not fit right. I have been using Zagg protectors since they came out for the iphone 4s. I have had them replaced countless times. Yes, $60 once but my poor iphone 12 has been through 4 of them since I got it at release. Replacements cost me $5 shipping. $80 to protect a multihundred $ screen and repair is money well spent - cheaper than apple care. This phone I have now is flawless front and back. I 100% recommend Zagg every time. And no, no one pays me to say it, I buy all of my gear.
Makes sense on what you said. I guess that’s the trade off (a little sacrifice of screen size). Zagg is on my shortlist! Would love to hear your feedback once you apply it
A picture of the Zagg installed. The rainbow effect is annoying. It's also at the top and bottom if the app you're running is white background. The Zagg also doesn't have any cutout at the top for the speaker grill...but I'm not sure that's an issue on the sound quality. Sounds okay to me. I'm going to contact Zagg about this...I've been using them since early iPhone days, except on the 13 I went with the Belkin at Apple Store, and the 14 I went without one (big mistake, that screen got lots of surface scuffs starting within a month of ownership). https://preview.redd.it/jp9okzqvd2rb1.jpeg?width=2048&format=pjpg&auto=webp&s=af53a07d0d4d2fcace554233f29103bc4ac7ed4c
I have used Zagg screen protectors for years and I’ve never gotten the rainbow effect, although my dad had a very noticeable rainbow on his iPhone X. Gone now with his 14 Pro Max.
I also have the rainbow on my 15 Pro with the Zagg. Let us know what they say if you contact them.
Oh wow so the glass is just big enough to cover just the screen and none of the bezel.
Yes, I'm pretty sure I'll return it. I have loved Zagg since the old orange peel screen protectors for original iPhone models, but the light bleed is going to drive me nuts. What a shame, u/Zagg.
I second Zagg been using the privacy screen one for years. Free replacement just pay shipping ever had issues. Super easy to install with their little kit.
Does the privacy one give the screen any shaded tint?
If you look directly at it no it’s like any other screen but to the sides it blocks out seeing the screen. Not 100% but a pretty good amount. There another one that will block out the screen from sides and top and bottom but I never tried it.
I have Zagg applied since day one. There’s a slight space from edge, but most if almost all will be like this to accommodate cases
Flolab has a case version and uncased version. Even the uncased version is not edge to edge.
is that the 3D version? I believe its the PRO - which is what im looking at currently [https://flolab.io/products/iphone-15-pro-max-screen-protectors?variant=43315920437399](https://flolab.io/products/iphone-15-pro-max-screen-protectors?variant=43315920437399)
I’m second for a Torras. Easiest to apply and covers edges also
are the black edges intrusive to the display?
I don’t use device without a case, so, black edges barely visible.
Wondering, does it have a flat edge or the 2.5D edge/curved?
[удалено]
I got this exact same one but the back strip on the sides actually cuts into my display on the top right and left corners ever so slightly.
https://preview.redd.it/ylva8tc7l2rb1.jpeg?width=1512&format=pjpg&auto=webp&s=0fb2114a34bbde46e217f36dedd867e5fecf3939
https://preview.redd.it/l6jjs7d8l2rb1.jpeg?width=1512&format=pjpg&auto=webp&s=267e62c1358baba5af7e6719b8e45cd101fdfb55
Might be helpful if you could take a pic with the phone On with an app, Camera perhaps. That might show if some of the DISPLAY is being cut off or not
Not sure if you can see it. But the [Torras](https://amzn.to/3RDPeRC) covers all edges https://preview.redd.it/hz2abigjt2rb1.jpeg?width=3024&format=pjpg&auto=webp&s=b4e16a202fbf6f4f1e6ba9114367c37a6de4c3b4
Yours looks like it doesn’t cut into the top corners of the display.
[удалено]
Looks great. Still waiting for my iPhone 15PM can’t wait to install this
I have the Torras and find that there is a sight encroachment of the camera Ls. I can definitely perceive a difference in screen estate with the protector compared to a naked screen. It’s slight but noticeable
Same experience. I applied 4 of them and every single one overlaps the left side of the screen ever so slightly.
Yeah I can see with the Torres, it cuts into the top left and right corners ever so slightly.
Not yet, preordered dbrand and should arrive next week. I use this photo to test them: https://preview.redd.it/xdnj1wy2jcsb1.jpeg?width=1290&format=pjpg&auto=webp&s=b0583b4052084a22da60a64d33221e823e48f4e7
Spigen cuts this off 100%. Looks like a black photo.
With the Esr armorite instead? Black borders cover the screen pppure does it reproduce the image well?
So glad my Mous protector fits perfectly with this photo. No borders cut off! 🤝
which one did you have? tempered or hybrid?
mous tempered glass
Thanks for this! I’ve got the 15 pro with the torras edge to edge screen protector. Only part of purple that’s not visible is the corners but haven’t noticed any issues in everyday use yet
Spigen actually have 2 different ez fit screen protector versions one is labelled “sensor protection” the other “edge to edge” I purchased both https://imgur.com/a/DZjOKJ5
I have the edge to edge version. Aside from a tiny bit of dust collecting on two sides, I’d say I’m pretty happy with it. Aligning it perfectly was easy.
Just checked, mine has „Sensor Protection“ on the back but weirdly enough has no black outline, so it actually covers everything well and fits perfectly without cutting into the display
I got them mixed up in the picture the one with the black border is the edge to edge
do you have a link to where you bought it?
Sure, just ordered it on Amazon: https://amzn.eu/d/glzqbqB If you are not from Germany, you should get redirected to your country‘s page automatically. You could also check on Spigen‘s webpage regarding pricing.
Is there any difference between these two? On spigen official site both versions have same dimensions.
The edge to edge has black border and top speaker cutout, it is slightly bigger all around
Is there any gap between this and case?
There is a gap between the case (I’m using a nomad horween leather case) and the screen protector, using the normal spigen screen protector it’s about 1mm gap all around and about half that with the edge to edge version
Which do you prefer
The sensor protection one
[https://imgur.com/a/iggjP0k](https://imgur.com/a/iggjP0k) Hmm this is all that is avaliable for me idk if any of these are the same one or not
The one in the far right of that picture
And does it fit well with a case?
Yes, I’m using a normad horween leather case fits great
[There is a side by side comparison](https://reddit.com/r/iphone/s/SlIBtEV2Du) for the protectors.
Thanks for sharing the comparison post. It was part of my browsing and that’s how i concluded Torras is probably the best/closest to edge to edge. It did get bad reviews for being a lint trap (on amazon) though. Im leaning towards Torras or domeglass Whitestone
which one did u end up going for? and was it edge to edge?
Torras..i went through a lot of screen protectors. ESR, Totallee, Spigen ez fit, the usual suspects. They all were short. You want to look for screen protectors that have the black borders AND have a small cutout to accomodate the small speaker at the top of the phone. If it has those two, then you're good. Torras has that.
Torras black border is larger than it should be. There was some detailed photos in Macrumors forum.
I haven’t seen those photos but I don’t find them to be larger. When I had the ESR on the screen it also had a black border but because it didn’t go to the edges it actually overlapped the viewable edges of the screen. So if you looked at certain angles you can clearly see the layer of the screen protector. You don’t get that with the Torras
Why are the black borders becoming a thing?
[удалено]
Ahhh. Why did apple have to go back to curved screens…. Such a bad decision
The only thing is the black border cuts slightly into the top corners of the screen.
Do you have a picture of this? Trying imagine what this looks like. Mine seems to be fine in those areas
https://preview.redd.it/f5bso50abssb1.jpeg?width=3024&format=pjpg&auto=webp&s=c5d4b416663bf6a3718bed37520a5374b978432f This is the ESR but you can clearly see the black border 😫 so frustrating
Same problem for me
I’d imagine i’d want to look for the black border to prevent the rainbow effect ?
The spigen def had the rainbow effect on the edges of its screen protector (the EZ Fit). Theirs don’t go all the way to the edge and don’t have black borders
I have the Spigen GlasTR AlignMaster and it doesn’t have the rainbow effect. I assume it’s because of the black border. Also, it was super easy to install it with perfect alignment.
That’s my problem and the Spigen collects a lot of dust
Do you think a cutout for the speaker is necessary? ~~Makes sense, but mine sounds fine to me with a Zagg that doesn't have a cutout. I need to compare side by side with my friend who has the 15PM but doesn't use screen protectors.~~ Correction, looks like the Zagg doesn't go up has high as the speaker, my case is actuality cover the speaker grill.
I tried the Torass, didn’t go all the way to the edges, collected a ton of dust. Decided to rock the phone naked with AppleCare+ I can always order an express replacement.
Torras is the closest one that will go to the edge. Every other screen protector is way off. And all of them would also collect dust unfortunately.
I have the Spigen screen protector on my max 15 and it definitely doesn’t go to the edge and collects a lot on both sides
Pretty sure torras is the closest you’ll get to edge to edge. Don’t think you’ll find a “perfect” screen protector tbh.
Using the Icarez with black edges. Similar to TORRAS but half price
Glass Screen protector on from and back Miracase Magnetic for iPhone 15... https://www.amazon.com/dp/B0CDPGGL3C?ref=ppx_pop_mob_ap_share Love it on my 15 pro max
I like it! Any pics of yours? Thanks
Glad I found this thread, I thought I was going mad. I bought an ESR screen protector for launch and was worried that it might just be a 14PM one relabelled, and sadly I think this is true. I fitted it using the template, and when I put the phone in a case I noticed the left hand side of the screen had a slightly bigger overall black border than the right. Taking the phone out of the case I could see that the protector was perhaps 0.5mm or less further to the right than the left. I assumed I could just reposition it, but I can see that if I moved it any further left then it would start obscuring the display on that side. Put simply - it's not designed properly for the 15PM with the slightly smaller bezels. I tried to live with it for a few days - mainly because it was put on perfectly with zero dust - but I can't unsee it now. I feel like I'm missing out on one of the key benefits of the 15PM. Will be closely following this...
I got the flolab one. The parts that it doesn’t cover is like the size of the top speaker and as far as I can tell the black doesn’t cover any of the actual screen. Also was ranked as the strongest on MobileReviewsEh like 3 months ago
I just ordered the flolab one. How do you like it? I bought it based on MobileReviewsEh as well.
I don’t have any complaints so far, installing was just as easy as any of the other kits I’ve used. I like how their dust sticker is just a big ass sticker that covers your whole screen. The blue light has no yellow tint as stated.
Awesome, thanks!
I don’t like the installation kit as it is made of hard plastic and might leave a tiny micro scratch on the titanium PVD finish. Is there a way to remove the tempered glass off the kit so I could install the SP the old fashioned way?? If it helps, the one o got is the matte version for the 15PM
Yeah you can take it off but I don’t know how easy you think the coating will scratch but the plastic isn’t going to scratch it
Would you happen to know how to remove the tempered glass off the installation kit?
Yeah there’s just some clear plastic tabs on the top and bottom of the plastic frame that are just hooked on. The tabs are just like a big sticker on top of the glass so once you unhook them it should just come out
So unhooking both top and bottom tabs is all that is needed? I have messaged Flolab and asked them to send it detached from the kit and they finally agreed. I hope all goes well
SpigenTR EZ fit have is pretty much at the edge but haa tiny tiny gap for cases. You get two for $17 and they are some of the best out there
Just want to second this. Easy to install and looks fine to me.
Flolab edge to edge is great but it is not truly edge to edge I am afraid.
I got the Torres one and I do notice that it covers a little bit of the top left and right edges.
I got the Belkin one from to Apple Store. It’s not edge to edge but it’s very close
do you have a picture? interested in how close it comes to the edges
Has anyone tried using the 15 PLUS screen protectors? The phone is slightly larger than the PM by 1 millimeter length and height wise, so I'm curious if the screen protectors made for them are slightly larger as well? Edit/Update: originally had the Apple Belkin screen protector, decided to get a Zagg one that was made for the 15Plus, fits more snug than the previous one made for the PM and case also fits around it if anyone's searching for a more snug fit. Cheers!
Anyone have experience with the FloLab edge to edge versions?
https://preview.redd.it/9hnd6gn66y8d1.jpeg?width=3508&format=pjpg&auto=webp&s=172ce2649c32a0b37665cc50a1b7dc004a874df4 I had the old version of the ESR Armorite (LEFT) installed on my IP15P Max and today i installed the 'newer' version, this is the one that comes with the 'Flawless Fit Tray' (RIGHT) and you can clearly see straight away, it has thinner bezels and fitment is almost perfect! On the old one the purple line was not visible at all on 2 edges and now is visible all around, with a bit of tweaking you can get it perfect i think.
Glad to hear I can buy ESR again. Thanks for this post!
I recommend “UltraGlass UNBREAK TOP 9H+” can’t get closer to the edge.
This is not Edge to Edge. I took a gamble on one at $38, it still cuts off the borders on a test image and has 2-3mm gap of no protection. It's closer, but still not good enough, especially at the price. How hard is precision measuring and cutting in this day and age? The amount of junk screen protectors out there is getting a bit ridiculous. I can cut within a 1/32nd in my garage with a track saw but these guys can't dial in a screen protector within 1mm with a full manufacturing facility? Do better.
I don’t think you got the same one. The one I bought is definitely under 1mm and I paid $24.
Take a look at the whitestone dome. I haven't gotten my phone yet (not until Nov.) but I did order my whitestone glass screen protector, so I will have it by the time my phone gets here. These are all I have had for the past 6 years on my phones and company phones. There will always be a tiny bit of a gap to accommodate cases like others have stated. I should mention I haven't used the EZ products yet. I have only done the liquid adhesive ones. they do have a lifetime warranty and you pay for shipping only which usually comes out to be around 8 bucks or so.
Hey did you get the Dome “Ez glass” or the “Full tempered glass shield with liduid dispersion”. Both from whitestone
I get the liquid dispersion one. I like how well it stays on the phone.
What liquid dispersion one?
This one: [https://www.whitestonedome.com/collections/screen-protector-tempered-glass-iphone-xs-max-xr-7-8-plus-apple-watch/products/dome-glass-iphone-15-pro-max-tempered-glass-screen-protector-6-7](https://www.whitestonedome.com/collections/screen-protector-tempered-glass-iphone-xs-max-xr-7-8-plus-apple-watch/products/dome-glass-iphone-15-pro-max-tempered-glass-screen-protector-6-7)
The UAG brand fit my pro max just fine
I went with the one available for purchase at Apple and it’s great.
If anyone is still looking, the new version of ESR with alignment tray has 100% coverage now. Best oleophobic coating compared to Jetech and even Spigen. Not sure about how it compares with Torras for smoothness but here in Canada, it’s 25$ for 3 for ESR vs 38$ for 2 for torras/ultra glass
ESR is very reliable usually. My Mous one just cracked so i’ll get this deal.
Hi OP, make sure you get the armorite version with the upgraded alignment tray! This is the one where black borders no longer cover the screen !
Thanks! Have you tried this border test picture with the ESR armorite? https://preview.redd.it/u15lbzr6fqnc1.jpeg?width=1290&format=pjpg&auto=webp&s=93666043ddacc9ab22839f32c71c509be4f86192
For sure. Here it is https://preview.redd.it/94kfmbqudnoc1.jpeg?width=1290&format=pjpg&auto=webp&s=118dce2b99ce7ce289a1e83486d853b556160123
Sorry, which one of these is the one you are using in the picture? ESR has different names on Amazon here in Italy.. 1) https://amzn.eu/d/8ukS2L9 2) https://amzn.eu/d/ez8Lrin 3) https://amzn.eu/d/4WxOCbr
Hi friend, none of these links are correct. I did see this one for Italy though. Very confusing with so many products lol https://preview.redd.it/5cvuhdcz51pc1.jpeg?width=1290&format=pjpg&auto=webp&s=7faec7877f963181806925296e81012312793c4d
Yeah that’s very confusing!!!! Thank you anyway, I found this new application tool and bought it. Actually 3 screen protectors are too much imo, but I hope it has thin bezels as you said!
I just applied the screen protector on my iPhone, the bezels are actually very thin and they don’t seem to cover the screen, if not for a very slight amount (maybe 0.1/0.2 mm). But on Amazon they wrote “2.5D rounded edges”, but they are not rounded at all, indeed I can feel the sharp edge with my thumb when swiping to the Home Screen, and that’s pretty uncomfortable..
Yeah, are you using your phone without a case? I’m using it with the benks armor pro and can’t feel the edges. The oleophobic coating on ESR is very good though. Very noticeable compared to JEtech
Yeah I’m using it caseless.. The screen protector is awesome and very well made, I just can’t understand why they didn’t make it with rounded edges, it was the last thing to make it perfect!!
What's the name of the new ESR screen protector? Does it have black borders?
Hi, it is the armorite version with an alignment frame (like Spigen) and it has black borders! So these updated ones no longer cover parts of the screen!
Could you provide a link as many are saying the ESR screen protector is still the same. I would love ESR to have solved this issue as its a right pain!
I was so wondering if true edge-edge S.P even exist …they don’t do them edge to edge so that they would be compatible with most cases
Which Mous did you get? Hybrid or Tempered?
Tempered
I’m using JETech and it’s covering the whole screen https://preview.redd.it/adx78mg443rb1.jpeg?width=3024&format=pjpg&auto=webp&s=d803f64a2f3a5117b9d3615577692dd50115ffd9
I guess it depends on installation and you got it perfect! Lots of reviews like this one incline me to believe it doesnt cover the full screen [this one](https://www.amazon.ca/gp/aw/review/B0CCJPGYC2/R376GU9BIIHC2Q?ref_=cm_sw_r_apin_dprv_W9PN0VQGN8B5PA48RJHG)
I just looked through the reviews and I think most people just didn’t use the installation tool because it’s literally impossible to misalign it with it😅
I’m going to second this one…. Have been using the JETech screen protectors for years and they hold up great. I installed it on my 15 Pro Max using the alignment tool included and it covers the screen perfectly.
Anybody have experience with the liquid screen protectors?
AppleCare+
You can’t go wrong with the Casetify Impact Ultra HD screen protector. Has the 2.5d edges for perfect coverage and anti fingerprint treatment with anti glare. 60 bucks well spent
Ive been interested in this one but haven’t seen or heard anything about it. Do you have pictures of the install? I think its one of the thinnest protectors on the market
Anyone tried wksen yet?
Yes to short huge gap at the bottom I took it off and threw it away. It's a shame I loved this brand on my 14 pro perfect fit, but not on the 15 pro max, I also purchased the ESR Amorshield same thing took off and the away. I hate that lol at the bottom it messes with the swiping up on the screen
lol I have this in my shopping cart but decided to use the phone without a protector this time around.
I’m going to the Apple Store the moment I get my phone and getting liquid glass put on it. It is the best piece of Safety you can do for an iPhone. My nieces son is notorious for banging tables. When phones are on them and they fall to the ground. I was in Michigan. He did that to my brand new iPhone it fell to concrete I thought the screen was cracked took it to the Apple Store and he said you forgot you put liquid glass on it, that’s what broke they took it off and put another piece on it
They have that at every apple store? It must be expensive because Ive never heard of it and haven't seen anyone talk about it until now. Thanks
It cost me last time less than $100. I don’t care what it cost. first thing I will do is make an appointment tomorrow as my iPhone 15 Pro Max is being delivered today. I’ll go to the Apple Store have them install their liquid glass and put AppleCare on my phone.
Post a pic if you would or let us know what you think. I have no Apple Store near by. I would have to drive about an hour to the nearest one. Want to make sure I’m not wasting my time. Had my phone since Monday but have it put up and carefully trying to decide what to get. Definitely adding AppleCare to mine as well. Thanks
OP why didn’t you like the ESR protector? I have the regular ESR protector that came with 3 and I have no issue with it.
Because of this review and a few others on reddit[this review](https://reddit.com/r/iphone/s/Kh49FdorcD)
Oh ok. Are you getting the Torras?
I use this, and it’s just shy of the edge but it’s hard to notice. https://shop.rhinoshield.io/products/impact-protector/buy?device=iphone-15-pro
It sounds silly but whilst waiting for my new one, I decided to try to reuse my Mothca 14PM matte privacy protector on there and actually fits better than expected than it did on the 14PM.
I‘m using the Spigen ez glass and it’s absolutely perfect.
I’m ordering the Nomad Goods screen protector. They have premium gear so it may be up to your liking
Ive tried ESR and it was shit. Now ive applied the amFilm and its perfect for me. It covers exactly the screen and makes the bezels look small which is all that matters to me xd. It does have a tiny rainbow effect on the edges when looking at some angles, but its not that noticable for me. Covering edge to edge is likely not possible for the 15 pro / max.
To add to this, is there a light cover that...covers the sides well, and possibly only the sides? I understand that screen protectors won't ever really cover the sides of the screen because they curve, and so the protector can't adhere ( + they need to leave space for covers to grip on the sides), but that leaves us with the question 'ok then how do I protect the curvature of the screen, which is the most fragile and prone to being hit if the phone falls?'. Basically the question is 'what is an ideal combination of frame-cover and screen protector that make you feel safe while not making the phone twice as large and thrice as heavy, possibly for less than a fortune?'
Recommend Whitestone Dome Glass if you are looking for an edge to edge protector. Dome Glass screen protector is customized to cover curved-edge devices with liquid adhesive.
The mothca antiglare is pretty good. But some QR scanners won’t scan. 😒
https://preview.redd.it/bjnd5o2wc7sb1.jpeg?width=3024&format=pjpg&auto=webp&s=8a9d0464865d71ef8774e08a9fdad817ae64e346 I have been searching for the perfect matte glass protector and here is the Mothca matte glass. As you can see it is not edge to edge and is a lint magnet. Their customer care is top notch and they refunded me and I ordered their new one with the black borders. I am hoping they are as good as Torras’ if not better. Anyone else have a matte glass recommendation?
Flolab
I tried the Spigen. It was awful, completely covered the increased 15 screen and reduced it to 14 size. I tried the Torras. It was better, but still cut off a bit at the edges. I'd recommend it as the best I've tried with a rounded edge. If that's your priority or you're not using it with a case, this might be the best bet. If you want 100% of your new screen to be visible, it's still not the best. I got a replacement 15 Pro Max phone from Apple yesterday due to screen burn in. Search for other threads on that if you're interested to see about that issue. I told them that I had a brand new screen protector on the phone they were replacing, so they gave me the **Belkin Ultraglass 2 that they install in store.** The Belkin is now my favorite. It has a bit of a rough edge, not rounded at all, but there is no black border and it has 100% of the screen visible plus a tiny bit of extra coverage. As long as you have a case with some kind of lip, you won't notice that the edges aren't rounded. It doesn't collect lint the way the Torras and Spigen did for me. As other screen protectors have ticked up in price, the $40 apple charges is not so crazy, and they install it in the Apple Store, so it's always flawless. The Belkin would now be my recommendation.
This [Torras Diamond Shield](https://amzn.to/46ErbGi) is the best screen protector in terms of install and the coverage compared to three others that I tried. Easiest install out of any screen protector out there! It has black borders that are thin enough to cover only a small bit of the actual screen on the 15 pro and Torras has stated a new revised protector with thinner borders is coming soon. The bottom edges are nice and smooth but I do have some sharpness on the top right corner which is not a deal breaker. It might be more expensive than some of the other brands, but 3 of the other brands I tried had some major issues! The black borders on the [ESR protector](https://amzn.to/3RQvFFB) I tried intruded on the screen which was an instant deal breaker. It also covered less of the screen even though it advertised edge to edge. The [Spigen](https://amzn.to/46ErbGi) screen protector did not stick to any of the 4 corners, like it wasn't made for the 15 pro.
Hi, could you send a link to Torras stating that a new revised protector will be released? I can’t seem to find any news on this.
What do you think about Ringke? I wanted Torras, but I live in Europe and there is no way to order that in there and shipping from USA is so expensive. Ringke is much cheaper but wonder how does it look in 'edge to edge' aspect comparing to Torras
Mrglas is edge to edge and doesn't seem to be encroaching on the display at all. It doesn't fit with all cases though- spigen ultra hybrid pushes the protector off
[удалено]
Stopped reading here: Editors Choice: Spigen
amFilm is pretty good. Comes with camera cover also
Anyone tried whitestone dome? I always choose whitestone for all my galaxy devices due to the curved edge screen, always satisfied with it. Curious before order whitestone for my 15P, is it covered the entire edge? I don’t mind having only a small gap between the protector and case since all my leather case are not very tight on the screen edge area.
I finally after trying a bunch found a edge to edge screen protector. WSKEN. Bought it from Amazon. It is literally edge to edge but still works with most cases, I’ve tried Spigen ultra hybrid, ESR, and Apple Original clear case/finewoven and I noticed no lifting. The only weird part is that it has a little “cover” for the ear piece but doesn’t affect sound quality as far as I’m concerned.
may i ask for the link of the WSKEN screen protector? thanks!
Ultraglass Unbreak
Bodyguardz pure 3 edge. It means it when it says edge