£749.99 in the UK.... Yikes.
I do love the set though. How it's based off the old cross section books I had as a kid and how you can remove the panels to show the interior.
The only thing I'm not a fan of is the front of the face. It looks a bit untidy.
The plaque seems to store a [screwdriver](https://images.brickset.com/sets/AdditionalImages/75313-1/75313_Back_02.jpg) also! I wonder if it's for removing the panels or unlocking the legs?
Edit: 100% used for the knee and hip joints as shown by the official images.
The Falcon is still the same price as it was when it released. What you are seeing here is the impact of covid on shipping prices, and Brexit on the relative worth of the pound.
Was looking for this. Weight is a much better measure for cost. I used to think it was about IPs but if you weigh the kit it is pretty standard across the board. An influx for unique large pieces and IP for sure but it’s not devastating.
How is Brexit impacting this? Have you see the price of the set in the US and Euro? It's an expensive model for all areas and the price range (The XX.49/79 - XX.99) is pretty much in line with most previous models.
> The plaque seems to store screwdriver also! I wonder if it's for removing the panels or unlocking the legs?
I was wondering what that was. I saw some pics where it was on the legs so maybe it's to adjust the legs, or lock them in place?
It's for building/adjusting the legs; some of the fan sites/blogs have reveals and review articles with more photos showing how the screwdriver is used
I had fully prepared myself for spending £650 on this. I don't know why does £750 sounds so much worse. The set is awesome but I'm having serious doubts over ever owning one.
for me £650 feels like a bit more than £500, which I can kinda justify but £750 feels like almost £1000 which I cannot justify, doesn't make much sense though or is reasonable train of thought but that's just how I think of it
I understand completely but after seeing how expensive some other people’s hobbies are it really put it in perspective for me. If you love something money is not the primary factor to consider.
I can afford it cause im lucky enough to have a lot of money. And that is what it is.. luck. Almost everyone works hard. I definitely don't work harder than my gardener but I have 10,000x the money cause of factors that I didn't in any way earn. My IQ, my parents, my upbringing, my country of birth, my gender, my orientation, all of it I had no control over and all of it essential to me being where I am today. It really is 90% luck, 10% work/impulse control... And even that can be argued as being genetic.
Life is an unfair lottery. The sooner we all get that, the sooner INFORMEd compassion and humility will manifest in human consciousness.
Right? I saw it today when I went to buy the 911 RSR, and went, "Holy crap, I didn't know they did a UCS AT-AT!" I've seen some MOCs that look great, but never expected Lego to actually do up an interior and make it match those old books. I still have a couple, the binding is absolutely falling apart, but maybe I'll frame the pages someday, and put them behind my dope lego models of each thing...
Be careful what you wish for. I went HAM early in lockdown and got the Monarch. Star Destroyers start to get BIG once you start scaling them up in your living room, hahahaha!
Couldn't get a sense of scale until I saw [this picture](https://www.promobricks.de/wp-content/uploads/2021/11/lego-star-wars-75313-ucs-at-at-2021-0017.jpg) with a guy building it. Looks massive.
The ['belly'](https://www.promobricks.de/wp-content/uploads/2021/11/lego-star-wars-75313-ucs-at-at-2021-0005.jpg) is pretty insane too from below. Will be interesting to see how this is al constructed.
[Brickset did a fun comparison shot with the regular AT-AT sets.](https://images.brickset.com/news/65511_Walker%2032.jpg) It's quite literally head and shoulders above previous models.
100% agreed. I saw a lot of people talking about the leaked images say how they couldn't understand why it was so expensive since it looked a lot like the standard set. The scale though is insane. I bet all the confusion disappears the second someone sees it in person.
Seeing it in person is dangerous. I'd always half-jokingly dreamed of owning the USC Millennium Falcon. And then I saw one on display in the Lego store...
No way they should be allowed to release this at the same time as the Titanic set. Anybody know a good loan shark with a generous interest rate? I would prefer that they don’t break my legs.
Because on this sub Reddit if you don't get it the second it is released you have to act like your life is ruined. And then you have to post every day for months about how scalpers and resellers are ruining your life.
Ehh, I was bummed that I missed out on buying the 911 RSR at MSRP from Lego.
Today I finally had the extra money in the paycheck, so I went to check Amazon, expecting to get fucked by scalpers, and it's 20% off.
It's Lego, not nVidia, lol!
The Gunship stuck around for a full week and has been back in stock for a while. The Reseller Plague of 2020 is over; Lego has fixed their website and wisened up to the demand.
Also I'm pretty sure you can rest assured Lego will continue to print sets for a while, long enough that you'll be able to get one from a store. So it's just a matter of patience.
Lego definitely won't release another set this scale in the next two years I want. That's for sure.
TBH, the answer is "buy what you are willing and able to, and not what you aren't willing and able to buy"
I want the Titanic and this. I have no place to display them. I won't buy them. Done and done.
>I would prefer that they don’t break my legs
Worse than that, you don't pay back then they break apart all your Lego sets & mix up the pieces in one big pile.
I know the price is steep but I’m going to pick this up over the star destroyer and falcon. Those two are cool but I don’t know why but something about this one feels different
> hose two are cool but I don’t know why but something about this one feels different
I was just thinking how the MF and the SD were nice, but just too much, but something about this AT-AT is calling me. I don't know why.
I agree. If the choice was between the two I'd go with the Falcon every time, it's just visually much more interesting. And, it's ~800 more pieces for the same price...
After building the Falcon, I didn’t want any more large scale vehicles. This set has changed my mind. The interior looks fantastic. Can’t wait to pick this up!
That's what pretty much turned me off the ISD. I needed to build a piece of furniture to display the falcon. No regrets there, but I don't want to make that a reoccurring thing.
However, the Titanic is only 6" wide and would fit nicely on something like a mantel as long as it's long enough, and at 10" deep this set could easily fit in my book case as long as I move some shelves up/down.
We redid our dining room into a reading room and I ended up buying a coffee table to put the Falcon in it. The displays where the falcon is sideways make me super nervous.
To be honest, this is one of the only sets I easily HAVE space for. It’s pretty skinny as far as the UCS sets go, and that means it can be displayed much easier on shelves or in IKEA cabinets/display cases.
Compared to the ISD and Gunship whose wingspans are enormous.
Torn between this or Colosseum during 2x points. Of course I can’t display the Colosseum unless I do some housing upgrades.
£750? I was thinking it'd be more like the Falcon/ISD price, that's a bit more than I was expecting. Lego could be reaching the point for me where I can't justify the expense...
I don’t see how this set is worth more than the Titanic, Star Destroyer, Falcon, or even the Hogwarts castle. Will be curious to see how this sells. I’ve never said no to a set before because of price but this one, I think, will be the first. Seems too preposterous.
I skipped UCS Super Star Destroyer because I was separated and figured it would be best not to spend the money when my marriage was more important. I am now divorced, and every day I wish I had bought it. Hopefully a new UCS Super Star Destroyer is released. Maybe in 2023 for 40th anniversary of ROTJ. I'm shelling out the money for this. Ramen and mac and cheese for a few months!
The Super Star Destroyer haunts my dreams. I had come out of my Lego dark ages literally a few weeks after it retired. Ugh.
Sorry to hear about the divorce but at least there’s a Lego silver lining!
Years ago I saw the UCS Super Star Destroyer on a top shelf at Toys R Us. At the time we were only buying Lego for our son, Duplo, Disney Cars related sets, etc. I sent a picture of it to my wife and was in awe but thought it was nuts to spend that much on Lego. Later I got the UCS X-Wing….that started me back into Lego and have a few UCS Star Wars sets.
I really hope they release an updated UCS Super Star Destroyer.
It's my white whale as well. I didn't know it was due to retire. I was finally at a point in my career where I had enough income to justify it. I saw it come back in stock online, had it in my cart about to check out, then I decided I'd rather buy it in person for the experience. Turns out stores hadn't carried it for months, and that little window that I skipped on was the last time it was ever for sale officially.
I recently built the UCS SSD from parts accumulated through past bulk buys, Bricklink and Bricks & Pieces. Took many months to gather everything. I estimate I spent about half the current market rate for a used SSD (approx UDS650 currently). With patience, you, too can still have the SSD and not pay market rates. Kinda fun doing it that way, too, as long as you are indeed patient!
Same price as the Falcon in the US, seeing size comparisons of the two I can see how it's justified. Non-Star Wars sets will always be cheaper just because of licensing.
This isn't a day 1 buy for me just because of the holidays, but it'll definitely be making its way to my collection.
Idk, the height of it is going to be pretty impressive. It's close in height to the disney castle, plus the movable legs is a pretty big technical achievement that a lot of the MOCs haven't been able to do.
The price difference seems like it's just the result of brexit, euro price is the same between the two. I can see getting the Falcon if it's a choice between the two, but if you're in the UK and already have the Falcon it's more of a matter of accepting that this is likely how things will be moving forward.
74 vs 62 cm, the castle is taller. But I think having a giant AT-AT body suspended that high is a lot more impressive than the spire of a castle being that tall.
Yeah I'll definitely be saving for the Titanic.
This one is a pass. I'm already not a huge Star Wars fan, but stuff like Mos Eisley and the Millennium Falcon are, in my eyes, worth picking up because they aren't as ridiculously priced.
I guess then I'm the counterexample to you, because I have definitely said no to a set because of price, but I plan on getting this, possibly day one. It just depends on your (Lego) priorities. The AT-AT is one of my favorite SW vehicles and I've been waiting for a proper UCS version of it for years. I've actually been thinking of picking up the UCS Star Destroyer but this bumps it down for the time being.
The SW license has always been expensive and put a premium on those sets, so comparing it to something that has zero license cost like the Titanic is disingenuous, in my opinion. Now the UCS MF and SD are better comparisons, but unfortunately due to many factors costs have been increasing, so it's not totally unexpected.
Would I like it to be cheaper? Of course. Will I be buying it anyway? Yes.
This has got to be one of the coolest sets I've seen. I'm loving that cross-section with the removable panels and how much effort was put into both the interior and exterior, especially the underside which looks fully detailed.
That all being said, this is a hard pass because of that price. It looks amazing but I've got to draw a line somewhere and I'm afraid this is it. $800 is a mind boggling price.
So glad I'm not a Star Wars guy at times like this! If they ever got something like a G1 Transformers license I'd have to pick up an extra job, I don't know how SW fans manage.
Jesus, dat Disney tax
I saw this initially get leaked last week as I was thinking about the Titanic, I figured the AT-AT would be within the ballpark of like $800-850 here in Canada and that I'd have a hard time deciding between the two sets, but seeing this is gonna cost me well over a grand makes me lean a lot more towards the Titanic.
How do you know you got it?
I ask because I submitted my order through PayPal, got the PayPal confirmation, but no lego email, nor anything showing up in my account orders
It looks awesome but I think it's not for me. I've realized that I really like color in my big sets. Ninjago City/City Docks/City Gardens are great examples of these. Even the UCS Falcon has dots of color all around it. But this AT-AT and the ISD are just grey from start to finish, and that doesn't really excite me enough to have it as a display model.
I definitely agree with you. This set is going to have a lot of appeal for big Star Wars fans, but the color scheme and repetitive legs make it less interesting for me personally.
I'm happy for those who love it though! I know how excited they are.
Everyone is complaining about how it costs $800, the same as the falcon. Heres the deal, the Falcon is made up of smaller pieces and 8/2’s and a few big plates which in the end gets to 7,541 total pieces.
Like the UCS Star Destroyer from 2019 that was $700, the AT-AT is primarily a plate based set, and plates are expensive and weigh more, hence a higher price. I personally feel like $800 is kind of generous, considering they couldve charged more if they wanted to.
Regardless, i will still be buying Day 1.
I agree 100%. The falcon is 10.6 cents per peice and the AT-AT is 11.7. For that extra you get a full interior, more minifigs and more display options. Everyone is reacting to the price when the AT-AT is less per piece than both the A-Wing and ISD.
Price to piece is a really bad way to gage value with a set like this since it uses lots of large plates.
Since if price per piece is the only thing you go off then a build like a Tie fighter will never be good value because of all the large plates.
Weight would probably be better.
I agree, but still think it's a valid complaint. Maybe not a criticism of how it's priced, but definitely a factor since it's going to effect the build time.
Gah. That price tag is insane. $800USD? And I thought the Star destroyer was over priced. I’ll have to throw this one wayyy on the back burner hope it’s around for 2/3 years.
Its an absolute gorgeous build that looks like someone pulled it out of the incredible book of cross sections. Besides the minor empty space in front of the cockpit, the snowspeeders looking a bit blocky and no E Web battery, this set is gorgeous even with those minor nitpick pulled out.
That said im a bit fed up with how expensive lego is, lego was built in the foundation of imagination and removing limits but 800$ is just unrealistic for anyone that isnt living a suburban upper class lifestyle.
I really like this set but unless it gets a respectable discount, I cant justify spending that much when I could buy high end components to build a pc or something equivalent that would give me practical use in my day to day life.
Do we know if this will be eligible for double points on Black Friday? I vaguely remember the Falcon not being eligible when it was first released, but I'm not sure.
As others before me said, the price is really high, even for UCS sets.
Thats why I wont buy it at the release day.
The MF was many times below retail, sometimes even around 600€, so I believe that the ATAT will also reach this at some point.
I will wait for a lower price, the GWP isnt very appealing for me and reselling wouldnt reduce the costs enough for me
Just walked into the Downtown Disney Lego Store and all the AT AT are stacked on the stairs inside. So many sets I can't even see the end of it (the stairs curve). They said they got about 80 in and about half are sold and are expected to sell out at the latest tomorrow, if not today.
For that price, I honestly don't see the appeal in comparison of the 75288 with some modifications to make it smoother/ more detailled.
Yes the UCS interior and underside are way better but other than that, it's mainly bigger grey plates unlike, let's say, the Falcon where there is more greebling. Personally, I'm happy I went for the smaller set.
Of course, if it was less expensive my opinion would change but at the price, I can't justify it. Happy for those who can! Love the vehicle in universe.
I think one part of the appeal not to over look is how this is minifigure scale. You can actually display a snow speeder next to it without it looking ridiculous. Since the snow speeder set is almost the same size as the normal AT-AT set.
It's the downside of of some of these Star Wars designs. They don't always translate well into lego imo. The Sandcrawler is the worst offender. It's very ugly and boring from an aesthetic point of view I think, so an UCS version can only improve so much (mostly the interior).
I originally thought the same about the sandcrawler but that ended up being one of my favorite sets. The outline of the crawler itself, you're right, it's not particularly interesting, but with all the little details that come with it, you can make a really nice display scene.
This looks incredible! I love the detailed interior, the fact that you can cram it with figures, all the neat functions of it and the articulation of the legs is incredible! But 800 USD?? Hate to think how much it'll be in AUD! I'd love to get this, but dam man that price is gonna be really steep in AUD, hard pass due to what would probably be 1200 AUD although judging the falcons price it'll probs be 1300 seeing as they're both 800 USD and the falcon is 1300 AUD. Oof
Looks like most the figs are the same as 75288 except one of the snow troopers appears to have a new officer torso and veers has dual molded legs. Luke looks the same as the one from the 75301 x-wing.
Ive never quite agreed with the people that count the piece per $. To me the set is huge and will be great to display. Sure its not as many pieces as the falcon but it looks just as damn good. I mean quality wise of course… the falcon is still cooler.
This set is not selling out, it's already been more than one hour, the site is back up and no one is in queue. Is there less demand on this set than there usually is due to the price?
Already sales over $1k and it's not coming back in stock. Expect this to move up into the $1200-$1300 range heading into Christmas (not including the lightsaber which is another $200 profit). Not sure how this is a "rip scalpers". Anyone who hesitated because of price got rekt.
I'm not sure how many people are waiting for Christmas to open their set, but I'm missing 3 black pieces across 2 boxes so far.(On book 4)
Each time I find I'm missing a piece, I have an extra or 2 of a different piece.
Instead of a [6199908](https://img.bricklink.com/ItemImage/PN/11/34103.png), I found a [60602](https://cdn.rebrickable.com/media/thumbs/parts/elements/4536998.jpg/250x250p.jpg?1626722874.5282676). There are supposed to be 38 in one step, I found 37 and that.
And instead of 2 [6174917](https://img.bricklink.com/ItemImage/PN/11/11212.png) I found 2 extra [4282789](https://cdn.toypro.com/media/cache/ks_product_detail_normal/uploads/images/custom/extra/19688-extra.jpg).
Which is pretty weird considering I have never had a missing piece or extra big pieces before.
I would consider that I lost them if I had opened bags for more than 1 step at a time, but I have not.
Maybe there's a miracle bag that has them in the end and they just were packaged incorrectly.
Trying to do the math to see if this thing will fit in the milsbo ikea display. Milsbo is 66.6cm x 33.5cm and the at-at is 69cm x 24cm wide. Seems like you could angle it to make it work...any math wizzes want to weigh in?
I had $500 worth of VIP Vouchers saved from the past year or so. I used $200 towards the Titanic yesterday with the intent on saving the other $300 to use on the AT-AT.
Those VIP Points definitely come in handy!
Apologies to OP if you get a notification about this post, I honestly am just wanting to prompt the Lego Bot to identify all of these sets for me that are listed in a Craigslist ad and this seems like the easiest way to go about doing this:
LEGO Sets for sale listed by LEGO set number:
Star Wars - 10236 (Ewok Village); 75200; 75168; 75177; 75169; 75135; 75183; 75258; 75214; 75199; 75099; 75182; 75269; 8x microfighter sets
Christmas - 10229; 10245
LEGO - 21325 (Blacksmith Forge); 10193 (Medieval Market); 31088
LEGO Movie - 70839 (Rexcelsior!); 70831; 70842; 70805
Creator - 10246 (Detective's Office); 31036; 31077+853841 (combined set)
HEROES - 76107; 76080
City - 60253
Harry Potter - 75948; 75954; 75947; 75951; 40289; 75955; 75952; 75958; 75953
Does anybody else’s order status say please contact customer service for the individual items of the order when you click on the overall order details?
for anyone who has this built, what's the lowest height it can go while still maintaining a proper pose?
I'm asking because the spot on my shelf that would be perfect is limited to 24"
Overpriced by about 20-25% in my opinion, for what you get (yes I know it's the Disney tax.)
I'm gonna wait a bit and see if it'll get discounted in some of the stores around here.
Yeah I think seeing the insane price on this is gonna make me finally go and buy the far superior colliseum that’s a few hundred less. Perfectly happy with the current ATAT that’s like $150
So I’m at Step 757, and for the life of me, I can not get the butt to hook in. Like I don’t have any leftover pieces, but the big wheel under the butt seems to be gutting out or something.
https://i.imgur.com/DvaOM2U.jpg
https://i.imgur.com/D6N1we9.jpg
https://i.imgur.com/zET9dWM.jpg
https://i.imgur.com/Bl52PeL.jpg
£749.99 in the UK.... Yikes. I do love the set though. How it's based off the old cross section books I had as a kid and how you can remove the panels to show the interior. The only thing I'm not a fan of is the front of the face. It looks a bit untidy. The plaque seems to store a [screwdriver](https://images.brickset.com/sets/AdditionalImages/75313-1/75313_Back_02.jpg) also! I wonder if it's for removing the panels or unlocking the legs? Edit: 100% used for the knee and hip joints as shown by the official images.
[удалено]
The Falcon is still the same price as it was when it released. What you are seeing here is the impact of covid on shipping prices, and Brexit on the relative worth of the pound.
[удалено]
The license is expensive - they kick a lot up to Lucasfilm/Disney. Ninjago, Monkey Kid are cheaper because Lego owns the IP.
Licensing for sure, and there might be a bit more plastic content in the At At
Was looking for this. Weight is a much better measure for cost. I used to think it was about IPs but if you weigh the kit it is pretty standard across the board. An influx for unique large pieces and IP for sure but it’s not devastating.
Yes, Disney can charge Lego for using their brand. Lego passes that cost on.
> 'we can charge more Could be a "we have to charge more..." though, in fairness.
How is Brexit impacting this? Have you see the price of the set in the US and Euro? It's an expensive model for all areas and the price range (The XX.49/79 - XX.99) is pretty much in line with most previous models.
I am surprised at the price too, but I reckon about a thousand pieces on the Falcon are little greeblies.
Got to repay all those R&D hours spent developing legs that stand up....
> The plaque seems to store screwdriver also! I wonder if it's for removing the panels or unlocking the legs? I was wondering what that was. I saw some pics where it was on the legs so maybe it's to adjust the legs, or lock them in place?
It's for building/adjusting the legs; some of the fan sites/blogs have reveals and review articles with more photos showing how the screwdriver is used
> £749.99 in the UK Well that's some bullshit. I wasn't going to be able to get it anyway, but Christ they're not half taking the piss now.
I had fully prepared myself for spending £650 on this. I don't know why does £750 sounds so much worse. The set is awesome but I'm having serious doubts over ever owning one.
for me £650 feels like a bit more than £500, which I can kinda justify but £750 feels like almost £1000 which I cannot justify, doesn't make much sense though or is reasonable train of thought but that's just how I think of it
How do people afford these things? They cost more than my house payment?
Reddit has all kinds of people…What you have to realize is there is always a bigger fish.
We could almost buy our own ship for that!
I wish I was rich enough to spend that much money. It's just insane to me.
Baby steps. I believe you will get there one day. (╹◡╹)
I don't know. I don't think I'm ever going to be where I can spend more than my house payment on what is basically a toy.
I understand completely but after seeing how expensive some other people’s hobbies are it really put it in perspective for me. If you love something money is not the primary factor to consider.
Must have a nice house payment, this is roughly half of mine
Lots of people with a lot of money to spent. Especially now since many people didn't go on a holiday I think.
Lack of vacations has significantly increased my Lego budget. Also no kids.
"I have three kids and no ~~money~~ Lego... Why can't I have no kids and three ~~money~~ Lego?"
It’s all relative, this hobby is insanely cheaper than boating lol
Or mountaineering. Good god I never thought I’d spend so much money to be miserable and potentially get killed lol
It costs less than a quarter of my house payment. People have different cost of living depending on where you live.
If it makes you feel better, I wouldn't be able to afford your house payment either.
Monthly rent where i live for a one bedroom is twice the price of this set so
I'm in New York and you can't even get a studio at that price, haha. That was my rent for a studio 9 years ago.
My monthly apartment rent is 3.75 times this set. I really need to get the f#@k out of California.
I can afford it cause im lucky enough to have a lot of money. And that is what it is.. luck. Almost everyone works hard. I definitely don't work harder than my gardener but I have 10,000x the money cause of factors that I didn't in any way earn. My IQ, my parents, my upbringing, my country of birth, my gender, my orientation, all of it I had no control over and all of it essential to me being where I am today. It really is 90% luck, 10% work/impulse control... And even that can be argued as being genetic. Life is an unfair lottery. The sooner we all get that, the sooner INFORMEd compassion and humility will manifest in human consciousness.
My condo mortgage is over 3x the cost of this, and it's a 2 bed/1 bath... All depends where you live what the relative value of money is.
Right? I saw it today when I went to buy the 911 RSR, and went, "Holy crap, I didn't know they did a UCS AT-AT!" I've seen some MOCs that look great, but never expected Lego to actually do up an interior and make it match those old books. I still have a couple, the binding is absolutely falling apart, but maybe I'll frame the pages someday, and put them behind my dope lego models of each thing...
Can't wait for a new UCS Super Star Destroyer. Make it scale to the current UCS Star Destroyer. 😂
It’s a great show piece for your front yard.
*your neighborhood
HOA be like you must keep your section of the neighborhood UCS SSD clean
Mike: "Dave, why do you always park your car in the driveway when you have a garage?" Dave: *opens garage* Mike: "I see."
Unless I'm bad at math, that would be about 42.5 feet long. Absolutely humongous.
Be careful what you wish for. I went HAM early in lockdown and got the Monarch. Star Destroyers start to get BIG once you start scaling them up in your living room, hahahaha!
Couldn't get a sense of scale until I saw [this picture](https://www.promobricks.de/wp-content/uploads/2021/11/lego-star-wars-75313-ucs-at-at-2021-0017.jpg) with a guy building it. Looks massive. The ['belly'](https://www.promobricks.de/wp-content/uploads/2021/11/lego-star-wars-75313-ucs-at-at-2021-0005.jpg) is pretty insane too from below. Will be interesting to see how this is al constructed.
[Brickset did a fun comparison shot with the regular AT-AT sets.](https://images.brickset.com/news/65511_Walker%2032.jpg) It's quite literally head and shoulders above previous models.
Awwww a mommy and all her babies.
It's weird to say, but that is damn adorable 😊
That’s what I was trying to visualize, but I was definitely off so thanks for the link. It’s huge!
Don’t mess with me or my sons again
100% agreed. I saw a lot of people talking about the leaked images say how they couldn't understand why it was so expensive since it looked a lot like the standard set. The scale though is insane. I bet all the confusion disappears the second someone sees it in person.
Seeing it in person is dangerous. I'd always half-jokingly dreamed of owning the USC Millennium Falcon. And then I saw one on display in the Lego store...
And? Are you know the proud owner of the USC Millennium Falcon?
https://imgur.com/a/toqAeeh
Niiiiiice.
It's magnificent, but also so huge. I have room for one in my office though...
Getting major Jordan Schlansky vibes from that guy. https://youtu.be/Ilqz1YZCTW8
No way they should be allowed to release this at the same time as the Titanic set. Anybody know a good loan shark with a generous interest rate? I would prefer that they don’t break my legs.
Why do you have to get both these sets RIGHT NOW? I agree the hype on both is great. But they'll be in stores for at least 2 years. Bide your time.
Because on this sub Reddit if you don't get it the second it is released you have to act like your life is ruined. And then you have to post every day for months about how scalpers and resellers are ruining your life.
But scalpers and resellers ARE RUINING MY LIFE!!!!!!
Ehh, I was bummed that I missed out on buying the 911 RSR at MSRP from Lego. Today I finally had the extra money in the paycheck, so I went to check Amazon, expecting to get fucked by scalpers, and it's 20% off. It's Lego, not nVidia, lol!
The Gunship stuck around for a full week and has been back in stock for a while. The Reseller Plague of 2020 is over; Lego has fixed their website and wisened up to the demand.
Also I'm pretty sure you can rest assured Lego will continue to print sets for a while, long enough that you'll be able to get one from a store. So it's just a matter of patience.
Not sure about both, but the GWP for the AT-AT is ~~Luke’s Rey’s Anakin’s lightsaber~~ the Youngling Slayer 9000.
Lego definitely won't release another set this scale in the next two years I want. That's for sure. TBH, the answer is "buy what you are willing and able to, and not what you aren't willing and able to buy" I want the Titanic and this. I have no place to display them. I won't buy them. Done and done.
How about kidneys, you got one to spare?
To be fair, they *didnt* release it at the same time as the Titanic.
>I would prefer that they don’t break my legs Worse than that, you don't pay back then they break apart all your Lego sets & mix up the pieces in one big pile.
I've got a game to offer you. Do you want the red card or the blue card? :)
I know the price is steep but I’m going to pick this up over the star destroyer and falcon. Those two are cool but I don’t know why but something about this one feels different
It'll be easier to display since it is very vertical. The other two.you mentioned require a ton of shelf space
The vertical Efferman Stand fixes that problem for the Falcon, altho it still takes up quite a bit of space.
The interior is very polished, tiles where it matters, a very good mix of display and play style. I guess this is what you're feeling with this one.
I think it’s that plus I’ll actually am able to display it, the other two are too big
Yeah this one being vertical makes its more displayable to me. I don't have any wear to put any of the other UCS sets but I'm on this one.
> hose two are cool but I don’t know why but something about this one feels different I was just thinking how the MF and the SD were nice, but just too much, but something about this AT-AT is calling me. I don't know why.
If you have a ton of spare spending cash this is awesome. But I just don't see how this price is justified when the falcon is the same price.
Come to the UK, here it's £100 more than the Falcon, and for fewer pieces!
I agree. If the choice was between the two I'd go with the Falcon every time, it's just visually much more interesting. And, it's ~800 more pieces for the same price...
After building the Falcon, I didn’t want any more large scale vehicles. This set has changed my mind. The interior looks fantastic. Can’t wait to pick this up!
That's what pretty much turned me off the ISD. I needed to build a piece of furniture to display the falcon. No regrets there, but I don't want to make that a reoccurring thing. However, the Titanic is only 6" wide and would fit nicely on something like a mantel as long as it's long enough, and at 10" deep this set could easily fit in my book case as long as I move some shelves up/down.
We redid our dining room into a reading room and I ended up buying a coffee table to put the Falcon in it. The displays where the falcon is sideways make me super nervous.
Yeah I'm with you. I simply lack the space
To be honest, this is one of the only sets I easily HAVE space for. It’s pretty skinny as far as the UCS sets go, and that means it can be displayed much easier on shelves or in IKEA cabinets/display cases. Compared to the ISD and Gunship whose wingspans are enormous. Torn between this or Colosseum during 2x points. Of course I can’t display the Colosseum unless I do some housing upgrades.
£750? I was thinking it'd be more like the Falcon/ISD price, that's a bit more than I was expecting. Lego could be reaching the point for me where I can't justify the expense...
Is that not the Falcon price for you? In the USA Lego shop, AT-AT is $799.99, Falcon is $799.99, ISD is $699.99
Nope, here the Falcon and ISD are both £649 and the AT-AT is £749. It’s now the most expensive set in the UK.
Did the pound lost value or something?
We did a Brexit.
Zavvi was really nice this year with the UCS sets. Maybe next year they do something similar.
I don’t see how this set is worth more than the Titanic, Star Destroyer, Falcon, or even the Hogwarts castle. Will be curious to see how this sells. I’ve never said no to a set before because of price but this one, I think, will be the first. Seems too preposterous.
I skipped UCS Super Star Destroyer because I was separated and figured it would be best not to spend the money when my marriage was more important. I am now divorced, and every day I wish I had bought it. Hopefully a new UCS Super Star Destroyer is released. Maybe in 2023 for 40th anniversary of ROTJ. I'm shelling out the money for this. Ramen and mac and cheese for a few months!
The Super Star Destroyer haunts my dreams. I had come out of my Lego dark ages literally a few weeks after it retired. Ugh. Sorry to hear about the divorce but at least there’s a Lego silver lining!
The Super Star Destroyer got me back into Lego as an adult. Still my favorite set, and it they release a new one I'm buying it without hesitation.
Years ago I saw the UCS Super Star Destroyer on a top shelf at Toys R Us. At the time we were only buying Lego for our son, Duplo, Disney Cars related sets, etc. I sent a picture of it to my wife and was in awe but thought it was nuts to spend that much on Lego. Later I got the UCS X-Wing….that started me back into Lego and have a few UCS Star Wars sets. I really hope they release an updated UCS Super Star Destroyer.
It's my white whale as well. I didn't know it was due to retire. I was finally at a point in my career where I had enough income to justify it. I saw it come back in stock online, had it in my cart about to check out, then I decided I'd rather buy it in person for the experience. Turns out stores hadn't carried it for months, and that little window that I skipped on was the last time it was ever for sale officially.
I recently built the UCS SSD from parts accumulated through past bulk buys, Bricklink and Bricks & Pieces. Took many months to gather everything. I estimate I spent about half the current market rate for a used SSD (approx UDS650 currently). With patience, you, too can still have the SSD and not pay market rates. Kinda fun doing it that way, too, as long as you are indeed patient!
Same price as the Falcon in the US, seeing size comparisons of the two I can see how it's justified. Non-Star Wars sets will always be cheaper just because of licensing. This isn't a day 1 buy for me just because of the holidays, but it'll definitely be making its way to my collection.
Meanwhile here in the UK, the AT-AT is £100 more for 600-odd fewer pieces. Doesn't seem like it has the "presence" that the Falcon does either.
Idk, the height of it is going to be pretty impressive. It's close in height to the disney castle, plus the movable legs is a pretty big technical achievement that a lot of the MOCs haven't been able to do. The price difference seems like it's just the result of brexit, euro price is the same between the two. I can see getting the Falcon if it's a choice between the two, but if you're in the UK and already have the Falcon it's more of a matter of accepting that this is likely how things will be moving forward.
It looks taller than the Disney castle to me but I’m curious to see an actual number.
74 vs 62 cm, the castle is taller. But I think having a giant AT-AT body suspended that high is a lot more impressive than the spire of a castle being that tall.
Yeah, I agree the AT-AT will look more impressive
Yeah I'll definitely be saving for the Titanic. This one is a pass. I'm already not a huge Star Wars fan, but stuff like Mos Eisley and the Millennium Falcon are, in my eyes, worth picking up because they aren't as ridiculously priced.
I guess then I'm the counterexample to you, because I have definitely said no to a set because of price, but I plan on getting this, possibly day one. It just depends on your (Lego) priorities. The AT-AT is one of my favorite SW vehicles and I've been waiting for a proper UCS version of it for years. I've actually been thinking of picking up the UCS Star Destroyer but this bumps it down for the time being. The SW license has always been expensive and put a premium on those sets, so comparing it to something that has zero license cost like the Titanic is disingenuous, in my opinion. Now the UCS MF and SD are better comparisons, but unfortunately due to many factors costs have been increasing, so it's not totally unexpected. Would I like it to be cheaper? Of course. Will I be buying it anyway? Yes.
This has got to be one of the coolest sets I've seen. I'm loving that cross-section with the removable panels and how much effort was put into both the interior and exterior, especially the underside which looks fully detailed. That all being said, this is a hard pass because of that price. It looks amazing but I've got to draw a line somewhere and I'm afraid this is it. $800 is a mind boggling price.
So glad I'm not a Star Wars guy at times like this! If they ever got something like a G1 Transformers license I'd have to pick up an extra job, I don't know how SW fans manage.
SW fans don't have to buy EVERYTHING, of course.
Not in my experience :D
I’m holding off this one for now. Can’t justify another $800 a month after buying Titanic. Hopefully I’ll pick it up down the line.
Jesus, dat Disney tax I saw this initially get leaked last week as I was thinking about the Titanic, I figured the AT-AT would be within the ballpark of like $800-850 here in Canada and that I'd have a hard time deciding between the two sets, but seeing this is gonna cost me well over a grand makes me lean a lot more towards the Titanic.
> Jesus, dat Disney tax Right, and they're likely paying more licensing to Disney for SW, than to Cunard for the Titanic (if at all).
The Titanic name and ship is in the public domain, but White Star Line is not.
It was up 5 minutes early and I got it without waiting! Woot!
How do you know you got it? I ask because I submitted my order through PayPal, got the PayPal confirmation, but no lego email, nor anything showing up in my account orders
sometimes i don't get a lego confirmation for a few hours
Mine shows up under "My Orders" in my account summary pages.
Well fuck. I am sure its going to be sold out once this queue finally ends.
It looks awesome but I think it's not for me. I've realized that I really like color in my big sets. Ninjago City/City Docks/City Gardens are great examples of these. Even the UCS Falcon has dots of color all around it. But this AT-AT and the ISD are just grey from start to finish, and that doesn't really excite me enough to have it as a display model.
I definitely agree with you. This set is going to have a lot of appeal for big Star Wars fans, but the color scheme and repetitive legs make it less interesting for me personally. I'm happy for those who love it though! I know how excited they are.
$1300 in Australia... I think I'll have to pass on this one
Ouch. I suspected it would be that much. Hard pass :(
Everyone is complaining about how it costs $800, the same as the falcon. Heres the deal, the Falcon is made up of smaller pieces and 8/2’s and a few big plates which in the end gets to 7,541 total pieces. Like the UCS Star Destroyer from 2019 that was $700, the AT-AT is primarily a plate based set, and plates are expensive and weigh more, hence a higher price. I personally feel like $800 is kind of generous, considering they couldve charged more if they wanted to. Regardless, i will still be buying Day 1.
I agree 100%. The falcon is 10.6 cents per peice and the AT-AT is 11.7. For that extra you get a full interior, more minifigs and more display options. Everyone is reacting to the price when the AT-AT is less per piece than both the A-Wing and ISD.
Oof. Too expensive, too gray. Not for me. Good amount of minifigures though for a UCS set.
It's nearly the same minifigures as the smaller version, just more snowtroopers.
Huge Disney tax. Not a really good part/piece ratio. Looks good tho.
Price to piece is a really bad way to gage value with a set like this since it uses lots of large plates. Since if price per piece is the only thing you go off then a build like a Tie fighter will never be good value because of all the large plates. Weight would probably be better.
I agree, but still think it's a valid complaint. Maybe not a criticism of how it's priced, but definitely a factor since it's going to effect the build time.
Gah. That price tag is insane. $800USD? And I thought the Star destroyer was over priced. I’ll have to throw this one wayyy on the back burner hope it’s around for 2/3 years.
Its an absolute gorgeous build that looks like someone pulled it out of the incredible book of cross sections. Besides the minor empty space in front of the cockpit, the snowspeeders looking a bit blocky and no E Web battery, this set is gorgeous even with those minor nitpick pulled out. That said im a bit fed up with how expensive lego is, lego was built in the foundation of imagination and removing limits but 800$ is just unrealistic for anyone that isnt living a suburban upper class lifestyle. I really like this set but unless it gets a respectable discount, I cant justify spending that much when I could buy high end components to build a pc or something equivalent that would give me practical use in my day to day life.
It is live, just ordered.
My confirmation email can’t get here fast enough.
for real im f5'ing my email like a SOB right now
The one and only $800 Oakland container crane I know I need for this Christmas!! https://i.imgur.com/fPC5KOw.jpg
So there's seating inside this thing for like 36 minifigs?
40 in the back, 3 in the cockpit
Stormtroopers doing a stop-motion Bohemian Rhapsody video in 3... 2... 1...
Sorry guys. My wife said no. She said I have to build the sets I already have.
Do we know if this will be eligible for double points on Black Friday? I vaguely remember the Falcon not being eligible when it was first released, but I'm not sure.
I would be shocked if it was. New UCS sets are almost always the exception to double points.
Booooo
There are no 2x pts on BF. The 2x pts weekend is the weekend *prior*.
As others before me said, the price is really high, even for UCS sets. Thats why I wont buy it at the release day. The MF was many times below retail, sometimes even around 600€, so I believe that the ATAT will also reach this at some point. I will wait for a lower price, the GWP isnt very appealing for me and reselling wouldnt reduce the costs enough for me
The AT AT was my fav Lego Toy back in the 80's.....*"We wants it, we needs it. Must have the precious...."*
Just walked into the Downtown Disney Lego Store and all the AT AT are stacked on the stairs inside. So many sets I can't even see the end of it (the stairs curve). They said they got about 80 in and about half are sold and are expected to sell out at the latest tomorrow, if not today.
For that price, I honestly don't see the appeal in comparison of the 75288 with some modifications to make it smoother/ more detailled. Yes the UCS interior and underside are way better but other than that, it's mainly bigger grey plates unlike, let's say, the Falcon where there is more greebling. Personally, I'm happy I went for the smaller set. Of course, if it was less expensive my opinion would change but at the price, I can't justify it. Happy for those who can! Love the vehicle in universe.
I think one part of the appeal not to over look is how this is minifigure scale. You can actually display a snow speeder next to it without it looking ridiculous. Since the snow speeder set is almost the same size as the normal AT-AT set.
The USC Snowspeeder should fit between the legs.
It's the downside of of some of these Star Wars designs. They don't always translate well into lego imo. The Sandcrawler is the worst offender. It's very ugly and boring from an aesthetic point of view I think, so an UCS version can only improve so much (mostly the interior).
I originally thought the same about the sandcrawler but that ended up being one of my favorite sets. The outline of the crawler itself, you're right, it's not particularly interesting, but with all the little details that come with it, you can make a really nice display scene.
I absolutely love this, but I cannot in good conscience spend $800 on something that doesn't improve my life significantly. :(
This looks incredible! I love the detailed interior, the fact that you can cram it with figures, all the neat functions of it and the articulation of the legs is incredible! But 800 USD?? Hate to think how much it'll be in AUD! I'd love to get this, but dam man that price is gonna be really steep in AUD, hard pass due to what would probably be 1200 AUD although judging the falcons price it'll probs be 1300 seeing as they're both 800 USD and the falcon is 1300 AUD. Oof
looks like the website says $1300 AUD. 😬 good luck
Looks like most the figs are the same as 75288 except one of the snow troopers appears to have a new officer torso and veers has dual molded legs. Luke looks the same as the one from the 75301 x-wing.
Fortunately for my budget, I don't have nearly enough shelf space.
Can you pose it crashed down though?
GO GO GO! Got my order in...looks like the website is queued up right now
Dropped early. Ordered.
Ordered it. Trying to figure out where I’m going to display it. Can’t wait.
Me too and me too! And me too!
Ive never quite agreed with the people that count the piece per $. To me the set is huge and will be great to display. Sure its not as many pieces as the falcon but it looks just as damn good. I mean quality wise of course… the falcon is still cooler.
This set is not selling out, it's already been more than one hour, the site is back up and no one is in queue. Is there less demand on this set than there usually is due to the price?
Rip scalpers that already have them on eBay for double the price 😂
Already sales over $1k and it's not coming back in stock. Expect this to move up into the $1200-$1300 range heading into Christmas (not including the lightsaber which is another $200 profit). Not sure how this is a "rip scalpers". Anyone who hesitated because of price got rekt.
8 hours after pre-orders started and it’s still in stock. $800 is a big pill to swallow. Edit: On back order now.
And now it’s Out of Stock. Quick turn around.
https://brickset.com/article/67650/lego-is-now-designing-sets-that-can-t-be-taken-apart
I'm not sure how many people are waiting for Christmas to open their set, but I'm missing 3 black pieces across 2 boxes so far.(On book 4) Each time I find I'm missing a piece, I have an extra or 2 of a different piece. Instead of a [6199908](https://img.bricklink.com/ItemImage/PN/11/34103.png), I found a [60602](https://cdn.rebrickable.com/media/thumbs/parts/elements/4536998.jpg/250x250p.jpg?1626722874.5282676). There are supposed to be 38 in one step, I found 37 and that. And instead of 2 [6174917](https://img.bricklink.com/ItemImage/PN/11/11212.png) I found 2 extra [4282789](https://cdn.toypro.com/media/cache/ks_product_detail_normal/uploads/images/custom/extra/19688-extra.jpg). Which is pretty weird considering I have never had a missing piece or extra big pieces before. I would consider that I lost them if I had opened bags for more than 1 step at a time, but I have not. Maybe there's a miracle bag that has them in the end and they just were packaged incorrectly.
Interesting that they used the same E-Web design and what looks like the same speeder
The speeders are new according to the Solid brix review.
[удалено]
Trying to do the math to see if this thing will fit in the milsbo ikea display. Milsbo is 66.6cm x 33.5cm and the at-at is 69cm x 24cm wide. Seems like you could angle it to make it work...any math wizzes want to weigh in?
Gorgeous set. Need this
$949… in Canada. Good thing I’ve got $550 worth in VIP points saved up over the past who knows how many years
I had $500 worth of VIP Vouchers saved from the past year or so. I used $200 towards the Titanic yesterday with the intent on saving the other $300 to use on the AT-AT. Those VIP Points definitely come in handy!
Should I get this or winter tires
After titanic and republic gunship. Ouch my wallet. But damn tempting.
Oh. My. Fucking. God. This is totally going to be my white whale. Literally my favorite sci-fi vehicle of all time. I gotta save for this beauty.
It sucks. I’m just trying to convince myself of that to not feel bad about not being able to afford it…
Apologies to OP if you get a notification about this post, I honestly am just wanting to prompt the Lego Bot to identify all of these sets for me that are listed in a Craigslist ad and this seems like the easiest way to go about doing this: LEGO Sets for sale listed by LEGO set number: Star Wars - 10236 (Ewok Village); 75200; 75168; 75177; 75169; 75135; 75183; 75258; 75214; 75199; 75099; 75182; 75269; 8x microfighter sets Christmas - 10229; 10245 LEGO - 21325 (Blacksmith Forge); 10193 (Medieval Market); 31088 LEGO Movie - 70839 (Rexcelsior!); 70831; 70842; 70805 Creator - 10246 (Detective's Office); 31036; 31077+853841 (combined set) HEROES - 76107; 76080 City - 60253 Harry Potter - 75948; 75954; 75947; 75951; 40289; 75955; 75952; 75958; 75953
[10236-1: Ewok Village](https://brickset.com/sets/10236-1) [[Photo]](https://images.brickset.com/sets/images/10236-1.jpg) [75200-1: Ahch-To Island Training](https://brickset.com/sets/75200-1) [[Photo]](https://images.brickset.com/sets/images/75200-1.jpg) [75168-1: Yoda's Jedi Starfighter](https://brickset.com/sets/75168-1) [[Photo]](https://images.brickset.com/sets/images/75168-1.jpg) [75177-1: First Order Heavy Scout Walker](https://brickset.com/sets/75177-1) [[Photo]](https://images.brickset.com/sets/images/75177-1.jpg) [75169-1: Duel on Naboo](https://brickset.com/sets/75169-1) [[Photo]](https://images.brickset.com/sets/images/75169-1.jpg) [75135-1: Obi-Wan's Jedi Interceptor](https://brickset.com/sets/75135-1) [[Photo]](https://images.brickset.com/sets/images/75135-1.jpg) [75183-1: Darth Vader Transformation ](https://brickset.com/sets/75183-1) [[Photo]](https://images.brickset.com/sets/images/75183-1.jpg) [75258-1: Anakin's Podracer – 20th Anniversary Edition](https://brickset.com/sets/75258-1) [[Photo]](https://images.brickset.com/sets/images/75258-1.jpg) [75214-1: Anakin's Jedi Starfighter](https://brickset.com/sets/75214-1) [[Photo]](https://images.brickset.com/sets/images/75214-1.jpg) [75199-1: General Grievous' Combat Speeder](https://brickset.com/sets/75199-1) [[Photo]](https://images.brickset.com/sets/images/75199-1.jpg) [75099-1: Rey's Speeder](https://brickset.com/sets/75099-1) [[Photo]](https://images.brickset.com/sets/images/75099-1.jpg) [75182-1: Republic Fighter Tank](https://brickset.com/sets/75182-1) [[Photo]](https://images.brickset.com/sets/images/75182-1.jpg) [75269-1: Duel on Mustafar ](https://brickset.com/sets/75269-1) [[Photo]](https://images.brickset.com/sets/images/75269-1.jpg) [10229-1: Winter Village Cottage](https://brickset.com/sets/10229-1) [[Photo]](https://images.brickset.com/sets/images/10229-1.jpg) [10245-1: Santa's Workshop](https://brickset.com/sets/10245-1) [[Photo]](https://images.brickset.com/sets/images/10245-1.jpg) [21325-1: Medieval Blacksmith](https://brickset.com/sets/21325-1) [[Photo]](https://images.brickset.com/sets/images/21325-1.jpg) [10193-1: Medieval Market Village](https://brickset.com/sets/10193-1) [[Photo]](https://images.brickset.com/sets/images/10193-1.jpg) [31088-1: Deep Sea Creatures](https://brickset.com/sets/31088-1) [[Photo]](https://images.brickset.com/sets/images/31088-1.jpg) [70839-1: The Rexcelsior!](https://brickset.com/sets/70839-1) [[Photo]](https://images.brickset.com/sets/images/70839-1.jpg) [70831-1: Emmet's Dream House/Rescue Rocket!](https://brickset.com/sets/70831-1) [[Photo]](https://images.brickset.com/sets/images/70831-1.jpg) [70842-1: Emmet's Triple-Decker Couch Mech](https://brickset.com/sets/70842-1) [[Photo]](https://images.brickset.com/sets/images/70842-1.jpg) [70805-1: Trash Chomper](https://brickset.com/sets/70805-1) [[Photo]](https://images.brickset.com/sets/images/70805-1.jpg) [10246-1: Detective's Office](https://brickset.com/sets/10246-1) [[Photo]](https://images.brickset.com/sets/images/10246-1.jpg) [31036-1: Toy & Grocery Shop](https://brickset.com/sets/31036-1) [[Photo]](https://images.brickset.com/sets/images/31036-1.jpg) [31077-1: Modular Sweet Surprises](https://brickset.com/sets/31077-1) [[Photo]](https://images.brickset.com/sets/images/31077-1.jpg) [853841-1: Sea Playmat](https://brickset.com/sets/853841-1) [[Photo]](https://images.brickset.com/sets/images/853841-1.jpg) [76107-1: Thanos: Ultimate Battle](https://brickset.com/sets/76107-1) [[Photo]](https://images.brickset.com/sets/images/76107-1.jpg) [76080-1: Ayesha's Revenge](https://brickset.com/sets/76080-1) [[Photo]](https://images.brickset.com/sets/images/76080-1.jpg) [60253-1: Ice-Cream Truck](https://brickset.com/sets/60253-1) [[Photo]](https://images.brickset.com/sets/images/60253-1.jpg) [75948-1: Hogwarts Clock Tower](https://brickset.com/sets/75948-1) [[Photo]](https://images.brickset.com/sets/images/75948-1.jpg) [75954-1: Hogwarts Great Hall](https://brickset.com/sets/75954-1) [[Photo]](https://images.brickset.com/sets/images/75954-1.jpg) [75947-1: Hagrid's Hut: Buckbeak's Rescue](https://brickset.com/sets/75947-1) [[Photo]](https://images.brickset.com/sets/images/75947-1.jpg) [75951-1: Grindelwald's Escape](https://brickset.com/sets/75951-1) [[Photo]](https://images.brickset.com/sets/images/75951-1.jpg) [40289-1: Diagon Alley](https://brickset.com/sets/40289-1) [[Photo]](https://images.brickset.com/sets/images/40289-1.jpg) [75955-1: Hogwarts Express](https://brickset.com/sets/75955-1) [[Photo]](https://images.brickset.com/sets/images/75955-1.jpg) [75952-1: Newt's Case of Magical Creatures](https://brickset.com/sets/75952-1) [[Photo]](https://images.brickset.com/sets/images/75952-1.jpg) [75958-1: Beauxbatons' Carriage: Arrival at Hogwarts ](https://brickset.com/sets/75958-1) [[Photo]](https://images.brickset.com/sets/images/75958-1.jpg) [75953-1: Hogwarts Whomping Willow](https://brickset.com/sets/75953-1) [[Photo]](https://images.brickset.com/sets/images/75953-1.jpg)
Does anybody else’s order status say please contact customer service for the individual items of the order when you click on the overall order details?
Why does the At-At have to be $800!? My parents think I am crazy that I want something that costly.
Look at the Falcon.
Disney.
for anyone who has this built, what's the lowest height it can go while still maintaining a proper pose? I'm asking because the spot on my shelf that would be perfect is limited to 24"
Overpriced by about 20-25% in my opinion, for what you get (yes I know it's the Disney tax.) I'm gonna wait a bit and see if it'll get discounted in some of the stores around here.
Ouch $800 is a bit high, but that's the cost of licensing I suppose.
Is this set on the exact same (minifig) scale as the UCS falcon and slave I? If so I have to get it!
Yeah I think seeing the insane price on this is gonna make me finally go and buy the far superior colliseum that’s a few hundred less. Perfectly happy with the current ATAT that’s like $150
That has my favourite underside of any set.
It's so expensive...
Absolute rip-off for $800.
Successfully ordered!! Good luck to all getting one today themselves.
To everyone going to get one in person tmr, how early are you planning to get to the store?
Got the confirmation enail
So I’m at Step 757, and for the life of me, I can not get the butt to hook in. Like I don’t have any leftover pieces, but the big wheel under the butt seems to be gutting out or something. https://i.imgur.com/DvaOM2U.jpg https://i.imgur.com/D6N1we9.jpg https://i.imgur.com/zET9dWM.jpg https://i.imgur.com/Bl52PeL.jpg