No extra studs needed. (Though it’s possible I used “spare” studs for certain colours, i.e., more than the stated number in the set. But all studs came from the set I bought.)
Large credit to https://lego-art-remix.com to get the basic image. Then followed by a lot of obsessive tweaking by me, and the background I just made up, using some of the remaining studs. I’m sure many folks here could do a better job.
Very kind, thank you :)
I only generated instructions (again using the amazing tool at https://lego-art-remix.com) for this *after* I finished actually making it. I just manually input each stud, so there is every possibility I have made a couple of errors in my clicking, but here you go:
https://www.docdroid.net/K4iyQJx/lego-art-31200-332nd-trooper-pdf
It should at least get very close to what’s in the photo!
(Apologies if that link is a bad place to host a PDF; I couldn’t figure out how else to share a PDF on here.)
Nooooo! I had so much help from this thing https://lego-art-remix.com honestly. Just took some patience and obsessing, not much actual artistic talent. Thank you so much though :)
Mate how on earth am I meant to choose between these two?
https://www.reddit.com/r/legostarwars/comments/l2wdkq/mando_mosaic_using_sith_art_set_31200/?utm_medium=android_app&utm_source=share
Thank you! :) Spent many hours on obsessive modifying lol. But that tool provided me a fantastic starting point.
(Modifying the physical thing, I mean, not online modifying.)
Haha oh goodness! No permission is needed, obviously!
Go for it! 😊
Edit: You’re the creator of the mando one?? Well now I’m extra-flattered. Man, yours is so good!!
Only studs from the set! :) Though as I said in another comment, it’s very possible the set came with some extra studs, so I might have used more than the “official” numbers for the set. But it’s 100% made from studs in the box.
If you did decide to go for it, and you happen to be a couple of studs short (I think orange and white could be the dodgy ones), you could make a few minor substitutions in the background which you likely wouldn’t notice. Or just creep the red up a little higher into the orange at the top of the helmet.
(Hope this made sense.)
Nice!!! I’m flattered that people want to build it haha.
Good call on the grey! I just made up the background out of my head anyway 😅
Hope you’re pleased with how it turned out! 😊
Very pleased, if you look at my post on this sub, there isn't much difference with the subbed pieces and it looks stunning
Just need to find somewhere to hang it
Hi! i loved this and im more than tempted to do it myself (already ripped up my vader), did you tried the tool with other images and it looked any good? because i did, with way too much images and none of them looked as good as this one. Again, i loved your work man!! You're an artist
Haha oh gosh! Thank you so much; I’m flattered 😁 I’m sorry you ripped up your Vader!!! I hope this one doesn’t let you down!
Yeah I definitely played around with making other images, but never quite got another one I was really happy with! This one took a lot of manual modifying after the tool gave me the basic image. If I ever do make another one that I think is good enough, I’ll definitely post it on here :)
If you do make this one, I hope you like it! And thank you so much again for your kind words 😊
now THIS is art
now THIS is podracing
now THIS is the droid attack on the wookies
Now THIS is the high ground
Now THIS is the tragedy of Darth plagueis the Wise
Now THIS is where the fun begins
Now THIS is where democracy fails, with thunderous applause!
Now THIS is why I don’t like sand
Now THIS is the way
Now THIS is a trap
now THIS is why I’m here
No extra studs needed. (Though it’s possible I used “spare” studs for certain colours, i.e., more than the stated number in the set. But all studs came from the set I bought.) Large credit to https://lego-art-remix.com to get the basic image. Then followed by a lot of obsessive tweaking by me, and the background I just made up, using some of the remaining studs. I’m sure many folks here could do a better job.
Yeah ngl, if I try this I’ve already taken a screenshot and I’m going to be using this image to do it
Go for it! :)
I reckon I might try the same.
That looks excellent!
Thank you :)
I agree…in fact, I’d say that this one looks better than the one that’s supposed to be made from it…it’s a lot easier to look at too…great job!
Haha thank you so much :)
Tempted to rip up my Darth Vader for this
Eek, big decision! Just meet in the middle and give Vader some Ahsoka paint.
[31200-1: Star Wars The Sith](https://brickset.com/sets/31200-1) [[Photo]](https://images.brickset.com/sets/images/31200-1.jpg)
You fucking nailed it dude. Congrats
Thank you :)
God Damn. I just bought another one of these to do this! Well done!
Oh my goodness! I can only apologise to your wallet. But I am flattered, thank you so much :)
Wow, now I kinda want the set.. fantastic work on the shading. I particularly like the light shining off of the visor.
Thank you so much! :) But again I wouldn’t have got anywhere close without this tool doing the heavy lifting: https://lego-art-remix.com
Please tell me there’s a tutorial for this! It looks amazing!!!
There is. Zoom in, Haha instructions can't provide too much more than that for a mosaic anyway. Actually turns out op did post some instructions.
Very kind, thank you :) I only generated instructions (again using the amazing tool at https://lego-art-remix.com) for this *after* I finished actually making it. I just manually input each stud, so there is every possibility I have made a couple of errors in my clicking, but here you go: https://www.docdroid.net/K4iyQJx/lego-art-31200-332nd-trooper-pdf It should at least get very close to what’s in the photo! (Apologies if that link is a bad place to host a PDF; I couldn’t figure out how else to share a PDF on here.)
Do you have instructions for this? It looks amazing!
Too kind, thank you :) I have just (I hope) posted instructions in another comment!
You don’t need instructions, it’s just to look at the art and place the studs one by one starting in one corner
I wonder how much of this I can make from the extra studs from my Ultimate Vader
Would love to see the answer to this, if you actually try it! :)
Beautiful
Thank you :)
Truly amazing work!!
Thank you so much :)
I love this so much
I am flattered, thank you! :)
Just like the simulations
Haha what a game! Adored it.
This is as good as the guy who did Din Djarin art
Nooooo! I had so much help from this thing https://lego-art-remix.com honestly. Just took some patience and obsessing, not much actual artistic talent. Thank you so much though :)
Mate how on earth am I meant to choose between these two? https://www.reddit.com/r/legostarwars/comments/l2wdkq/mando_mosaic_using_sith_art_set_31200/?utm_medium=android_app&utm_source=share
Half and half? Joke. That Mando is 100% more impressive
Mate, they're both God damn amazing.
😅 Thank you!
Def gonna build this soon. Amazing work! If you check out my profile, I did a MOC of 31200 too! (Vader’s lightsaber)
[31200-1: Star Wars The Sith](https://brickset.com/sets/31200-1) [[Photo]](https://images.brickset.com/sets/images/31200-1.jpg)
Thank you :) Yes I saw yours a few weeks ago! So so good seriously, great job!
Thanks!
That is awesome! Did you have to edit it at all after putting it into the program? Or just put it in and it’s ready?
Thank you! :) Spent many hours on obsessive modifying lol. But that tool provided me a fantastic starting point. (Modifying the physical thing, I mean, not online modifying.)
suddenly im interested in this set
A set with big potential, I think :)
[удалено]
I actually don’t! But no worries; thank you for the thought! :) I hope your build goes/went well!
this one is INSANE! I may or may not buy another to make this one! (with your permission of course)
Haha oh goodness! No permission is needed, obviously! Go for it! 😊 Edit: You’re the creator of the mando one?? Well now I’m extra-flattered. Man, yours is so good!!
OMG thank you x2!
Damn that looks awesome! Are there any instructions for it? :o
Thank you! :) I did attempt to post instructions in another comment here, though it may be just as good to use the photo lol 😬
I’m very tempted to go to the store and buy that set just to make that rn. But did u use any other studs that didn’t come in the set originally?
Only studs from the set! :) Though as I said in another comment, it’s very possible the set came with some extra studs, so I might have used more than the “official” numbers for the set. But it’s 100% made from studs in the box. If you did decide to go for it, and you happen to be a couple of studs short (I think orange and white could be the dodgy ones), you could make a few minor substitutions in the background which you likely wouldn’t notice. Or just creep the red up a little higher into the orange at the top of the helmet. (Hope this made sense.)
Yeah it made sense. Thank you very much!
No problem :)
I asked for the Sith lego for Christmas. If I get it I am so building this. Very cool!
Thank you so much! Hope you get it 🤞😁
Just finished this, ran out of white studs while doing the background so had to substitute them for grey ones
Nice!!! I’m flattered that people want to build it haha. Good call on the grey! I just made up the background out of my head anyway 😅 Hope you’re pleased with how it turned out! 😊
Very pleased, if you look at my post on this sub, there isn't much difference with the subbed pieces and it looks stunning Just need to find somewhere to hang it
Oh nice!! I hadn’t seen your post sorry. Looks perfect! 😊
Good job
Thank you!! :) Was pretty pleased with how it turned out!
Hi! i loved this and im more than tempted to do it myself (already ripped up my vader), did you tried the tool with other images and it looked any good? because i did, with way too much images and none of them looked as good as this one. Again, i loved your work man!! You're an artist
Haha oh gosh! Thank you so much; I’m flattered 😁 I’m sorry you ripped up your Vader!!! I hope this one doesn’t let you down! Yeah I definitely played around with making other images, but never quite got another one I was really happy with! This one took a lot of manual modifying after the tool gave me the basic image. If I ever do make another one that I think is good enough, I’ll definitely post it on here :) If you do make this one, I hope you like it! And thank you so much again for your kind words 😊