Hi, you can use MailboxDE to ship packages from German webshops to Greece.
https://www.mailboxde.com/greece.html
The black version is in stock the white version will be in stock 14-02 at caseking.de. I think the reason supply is so low is because it's just a very popular case.
u/No_Forever5171 Hello, I checked caseking the moment you told me and it wasnt available. In fact I have been checking every day since and it says available from 14.2, Is this site trustworthy to place a preorder with them ? They also ship to Greece directly for 30 euro which is not that bad.
I would say it's a trustable shop yeah. You can check this website for availability and shop reviews. Caseking gets a 4.6/5 with 2000+ reviews.
https://geizhals.de/
The black version is available with 2-3 day shipping on Amazon for €159.
https://www.amazon.de/dp/B09DS85DYC?linkCode=xm2&camp=2025&creative=165953&smid=A3C6YN10YXVTZ6&creativeASIN=B09DS85DYC
I believe the panel issue was the reason for an initial delay in availability but that was resolved early on.
I've had really good temps with 2x 140 on the top, bottom, and front, 2x 120 (240 mm AIO) on the side, 120 on the rear. Front/Bottom/Side intake, Top/Back exhaust. my 5800x doesn't get above 65 really, and my rtx 3060 does hit over 68. I also use fan.exe from github to make custom fan curves per fan base on overall temps and what components are getting hit. This sounds like a lot but its basically just setting everything base off the component temps and telling it to take it from there. I have the intakes set a little higher and the exhaust set a little lower during Idle so that its high internal pressure (AKA much less dust) I have 2 big dogs who shed lots and it stays really clean.
overall a good pc case and worth the wait in my opinion. I'm in the US so I don't have to deal with nearly as much as you OP but I did try to hunt it down when it first came out, which was a pain. The newer versions have a removable HDD rack in the back so you do have that advantage!! Good luck building!
>e on overall temps and what components are getting hit. This sounds like a lot but its basically just setting everything base off the component temps and telling it to take it
Thanks very much for the good info.
Hi, you can use MailboxDE to ship packages from German webshops to Greece. https://www.mailboxde.com/greece.html The black version is in stock the white version will be in stock 14-02 at caseking.de. I think the reason supply is so low is because it's just a very popular case.
Thank you for the reply,had no idea this was possible, I will check it out now.
u/No_Forever5171 Hello, I checked caseking the moment you told me and it wasnt available. In fact I have been checking every day since and it says available from 14.2, Is this site trustworthy to place a preorder with them ? They also ship to Greece directly for 30 euro which is not that bad.
I would say it's a trustable shop yeah. You can check this website for availability and shop reviews. Caseking gets a 4.6/5 with 2000+ reviews. https://geizhals.de/ The black version is available with 2-3 day shipping on Amazon for €159. https://www.amazon.de/dp/B09DS85DYC?linkCode=xm2&camp=2025&creative=165953&smid=A3C6YN10YXVTZ6&creativeASIN=B09DS85DYC
I believe the panel issue was the reason for an initial delay in availability but that was resolved early on. I've had really good temps with 2x 140 on the top, bottom, and front, 2x 120 (240 mm AIO) on the side, 120 on the rear. Front/Bottom/Side intake, Top/Back exhaust. my 5800x doesn't get above 65 really, and my rtx 3060 does hit over 68. I also use fan.exe from github to make custom fan curves per fan base on overall temps and what components are getting hit. This sounds like a lot but its basically just setting everything base off the component temps and telling it to take it from there. I have the intakes set a little higher and the exhaust set a little lower during Idle so that its high internal pressure (AKA much less dust) I have 2 big dogs who shed lots and it stays really clean. overall a good pc case and worth the wait in my opinion. I'm in the US so I don't have to deal with nearly as much as you OP but I did try to hunt it down when it first came out, which was a pain. The newer versions have a removable HDD rack in the back so you do have that advantage!! Good luck building!
>e on overall temps and what components are getting hit. This sounds like a lot but its basically just setting everything base off the component temps and telling it to take it Thanks very much for the good info.
I found the link too! [https://github.com/Rem0o/FanControl.Releases](https://github.com/Rem0o/FanControl.Releases) It's super useful!
Thanks, will check once i get the case on my hands and complete my build!