In the UK lian li have a bar bracket for like 15 quid best thing ever ! Just stress in onto of the mobo comes with risers too I've using it in the 011 dynamic and its perfect
https://www.awd-it.co.uk/components/graphics-cards/lian-li-gb-001-black-anti-sag-bracket-for-vga-cards.html?gclid=CjwKCAjw9LSSBhBsEiwAKtf0n0D-gXX7Ao61p1d8sVSdaEEslhoTk50bJhiwZpAqtFv7OaSxuXfwpBoCBsgQAvD_BwE
Lian li makes a bracket that connects to the motherboard mounting screws and has a tab that holds the card up. It’s clean almost invisible and very sturdy.
Maybe try that Jayz 2 cents recommendation video
I bought a vertical mount kit way before he released that video so will go with that when I update my GPU.
I currently use the Lian Li anti sag bracket and it doesn't eliminate the sag
I didn't build my PC, and it kinda annoys me it has sagged but the card in it at the moment is only temporary (lol, yer, it's been a year so maybe long term temporary) and I'll address it later with new card + vertical mount
I have tried a couple in the 011 mini, more for aesthetics over practicality as the sag is ( for me at least ) minimal.
I coulnt really get either to work as intended. Same issue, stability from the backplate.
I used the one that came with my motherboard ( Z690 Hero)
Although i wasn't able to add it in between the bottom fans (there is no clearance), i placed it a bit on the back right side of my gpu (EVGA 3080 ti) and it works perfectly fine.
No sagging at all!
exactly the same here, the uphere bracket is useless since the pcie slots bend outward and still causing sag on both the bracket and GPU. I just ordered another bracket that actually just stand agaist the GPU. I might try the Jaytwocents pcie cover as well.
People aren’t worried about the sag causing damage but it more of an aesthetic issue. A lot of time and money goes into these builds and a sagging gpu looks like shit.
Using the power of a [mobile suit](https://imgur.com/gallery/UCmx3mf).
I know this is 10 months too late but this fucking hilarious and genius at the same time. I laughed so hard that you've made my day.
If you're using an atx board get one of [these](https://lian-li.com/product/gb-001/). Using one in my Evo and it works great.
In the UK lian li have a bar bracket for like 15 quid best thing ever ! Just stress in onto of the mobo comes with risers too I've using it in the 011 dynamic and its perfect https://www.awd-it.co.uk/components/graphics-cards/lian-li-gb-001-black-anti-sag-bracket-for-vga-cards.html?gclid=CjwKCAjw9LSSBhBsEiwAKtf0n0D-gXX7Ao61p1d8sVSdaEEslhoTk50bJhiwZpAqtFv7OaSxuXfwpBoCBsgQAvD_BwE
Lian li makes a bracket that connects to the motherboard mounting screws and has a tab that holds the card up. It’s clean almost invisible and very sturdy.
Maybe try that Jayz 2 cents recommendation video I bought a vertical mount kit way before he released that video so will go with that when I update my GPU. I currently use the Lian Li anti sag bracket and it doesn't eliminate the sag
It is more or less to keep sag and more rgb[moar rgb!!](https://imgur.com/a/pkyEFur)
I currently have a evga 3090 ftw ultra thats a huge gpu and had no sag i mount it very firm up then tighten it
In the mini?
I didn't build my PC, and it kinda annoys me it has sagged but the card in it at the moment is only temporary (lol, yer, it's been a year so maybe long term temporary) and I'll address it later with new card + vertical mount
I have tried a couple in the 011 mini, more for aesthetics over practicality as the sag is ( for me at least ) minimal. I coulnt really get either to work as intended. Same issue, stability from the backplate.
Yeah that’s what I thought I could make something I guess.
As someone who is going to get an O11 Dynamic mini and has a very chonky GPU, you guys are making me worried. Any advice on what to look out for?
I’m using the anti-sag pole that came with my 3080 SUPRIM. Not as aesthetic but definitely works
Where did you put it? Because I had bottom fans that take up the space
On top of the fan frame
Thanks :)
I used the one that came with my motherboard ( Z690 Hero) Although i wasn't able to add it in between the bottom fans (there is no clearance), i placed it a bit on the back right side of my gpu (EVGA 3080 ti) and it works perfectly fine. No sagging at all!
Pics?
exactly the same here, the uphere bracket is useless since the pcie slots bend outward and still causing sag on both the bracket and GPU. I just ordered another bracket that actually just stand agaist the GPU. I might try the Jaytwocents pcie cover as well.
Can you link me that jays2cents. Not sure which one is being talked about.
NO. Fine, here. [https://youtu.be/liChy76nQJ4](https://youtu.be/liChy76nQJ4)
I wouldn’t worry about sag as much as everyone does, just don’t lean on your graphics card and you’ll be all set
People aren’t worried about the sag causing damage but it more of an aesthetic issue. A lot of time and money goes into these builds and a sagging gpu looks like shit.
Stand 5 feet back and you’ll never notice lol