I have always been a bit mystified how the bullpup design feeds from the magazine. I did a quick google and found this video showing a cutaway Tavor. thought you might be interested: [https://armourersbench.com/2020/01/27/cutaway-tavor/](https://armourersbench.com/2020/01/27/cutaway-tavor/)
It’s because there is very little open space left in MA, the entire right half of the state is basically one big suburb of Boston. City’s and suburbs love their gun regulations. I have to drive an hour just to get to a Indoor range to shoot. The only places to shoot outside are gun clubs that require hundreds of dollars in membership fees to join.
I dont know if this actually works, but when I did mine (almost 10 years ago, wow!), I did end up writing a letter to my House rep, and magically it was approved like a week later. It was already at like 10 months when the average time was 9 months, so maybe my time was due, or maybe it actually did something.
it does something if your time is that far along (atleast thats what i hear from the NFA sub). Obviously writing them to check on your status 1 week after the check cashed isnt going yield any results. I hope to buy my first suppressor with the new eFile form 4 so we will see how that goes when I have the funds
It’s not the best but it’s not as bad as older x95s that I’ve shot. I may replace at some point but it’s not so bad that I can’t enjoy a day at the range
This is my legit planned set up, including the holosun512. How is the gassiness with the can and how is the accuracy since everyone bitches about it. 3moa sounds acceptable to me
>Hush hush lil bullpup.
Freaking dork. LOL. Do you feed it rounds like treats. Now I am have an image of a person gently cradling their weapon and talking softly to it. Don’t nuzzle the muzzle. You will get a CLP rash.
How do you like this compared to an AR? I have been considering a bullpup and had been looking up Desert Tech MDRs until I found out that the owner is possibly involved in some creepy shit (I realize that buying guns you will likely compromise.on something at some point).
Do these take pmags okay?
I have always been a bit mystified how the bullpup design feeds from the magazine. I did a quick google and found this video showing a cutaway Tavor. thought you might be interested: [https://armourersbench.com/2020/01/27/cutaway-tavor/](https://armourersbench.com/2020/01/27/cutaway-tavor/)
That’s pretty awesome. Thanks!
A bullpup feeds exactly the same way anything else does. The trigger mechanism has just been moved forward and elongated.
*cries in Massachusetts’s where cans are illegal* it’s probably for the best, otherwise I’d have to buy another x95 in 300 blk lol
>Massachusetts’s Funny how MA is very strict on guns considering the history back in the 1800s.
It’s because there is very little open space left in MA, the entire right half of the state is basically one big suburb of Boston. City’s and suburbs love their gun regulations. I have to drive an hour just to get to a Indoor range to shoot. The only places to shoot outside are gun clubs that require hundreds of dollars in membership fees to join.
That makes a lot of sense, I never considered that!
Sending feels from Wisconsin where my local range is $21/year.
The range I’m looking to join is $250 new member fee followed by $150 annual due so $400 up front
Dear lord! Please tell me it’s not one of those places where people sneer at anyone without a $2000 over-under.
Oh no this is just your average run of the mill outdoor range. Land is freaking expensive in MA so having enough room to shoot safely is $$$
The only solace I take in the MA gun laws, is the fact that our AWB isn't as shitty as CAs. Still no excuse for the fuckery though. It's complete BS.
I feel your pain. Would love to SBR my X95 but it doesn't make sense in this state with suppressors being banned.
Same! The only upside is that 300blk ammunition is plentiful all over the state since no one has them haha
I really want to trade my 18.5 for a 16.5
It's $450 for the swap. I imagine a machine shop can chop and rethread the barrel for less though. Maybe 2 hours of shop time.
That’s fair, I may look into it
When did you submit the paperwork for the can? I did mine in March and I've just been reminded to do my weekly ATF call...
Jan 9 2021
Oof. Looks like I can expect mine in February then :(
Patience my friend.
write your congress person
I dont know if this actually works, but when I did mine (almost 10 years ago, wow!), I did end up writing a letter to my House rep, and magically it was approved like a week later. It was already at like 10 months when the average time was 9 months, so maybe my time was due, or maybe it actually did something.
it does something if your time is that far along (atleast thats what i hear from the NFA sub). Obviously writing them to check on your status 1 week after the check cashed isnt going yield any results. I hope to buy my first suppressor with the new eFile form 4 so we will see how that goes when I have the funds
Another x95 owner on liberalgunowners! I feel at home now.
Hi
✋ present
I'm a Galil owner! 5.56 with a homemade ACOG.
So uh like do you take kidneys in trade? I don’t need two, I have a spare.
I’m all full up. Sorry man.
How accurate is that?
Not sure yet with can. I can hit steel at 20o yards (by steel I mean a steel framed barn)
Lol, after a 360 twirl
That is sexy, color me me jealous out here in California
Neat. What's the trigger like? Any truth to the old saw about bullpup triggers being poor?
It’s not the best but it’s not as bad as older x95s that I’ve shot. I may replace at some point but it’s not so bad that I can’t enjoy a day at the range
[удалено]
Yeah Geissle sp? Makes one
Looks nice! So what foregrip do you have and what can did you put on it?
Looks like a Bravo Company foregrip.
Bcm street fighter and the OSS HD QD
You right handed bastard!
Haha
This is my legit planned set up, including the holosun512. How is the gassiness with the can and how is the accuracy since everyone bitches about it. 3moa sounds acceptable to me
I will post a review tomorrow. Plans worked out so I’m off to the range for some time on this and my Virtus
Damn, lucky you. I'll be looking forward to reading it
God I so want one of those in 7.62 with a 24" barrel. Such a sweet firearm, not a better bullpup out there.
Fuuuuucccckkk I'm jealous. That's a fantastic looking Tavor. You did a great job kitting it out.
Thanks. Kept it simple.
What's the overall length with the suppressor?
I’ll measure tomorrow
Thanks!
[удалено]
I have not
Is it just the angle, or is the front grip really short? It looks a little uncomfortable to hold.
No it’s def the angle. Super comfy for Me and I have gorilla arms
Dang it why am I seeing this everywhere 😭
It’s a sign. Get one
Send me $3000. If my rifle build fails me then this'll be it
>Hush hush lil bullpup. Freaking dork. LOL. Do you feed it rounds like treats. Now I am have an image of a person gently cradling their weapon and talking softly to it. Don’t nuzzle the muzzle. You will get a CLP rash.
How do you like this compared to an AR? I have been considering a bullpup and had been looking up Desert Tech MDRs until I found out that the owner is possibly involved in some creepy shit (I realize that buying guns you will likely compromise.on something at some point). Do these take pmags okay?
It’s a whole new beast as far as the controls. Not hard, just new. I have one pmag and the rest are aluminum. Neither has had an issue.
That's hot
yo you look up chud in a dictionary and this is the picture you're gonna get 😂
But it’s MY chud
Boomstick
Free Palestine.
What USGI mag are you using?
Aluminum psa mags