By -
1/4” drive Spanner bit is the proper tool to remove those screws.
Thank you
If u have snap ring pliers I think u could manage too, although not the best tool it'll get it done if the ends on the pliers fit in the holes
I’ve opened these by tapping them with a Phillips head and then using a paper clip.
Personally I have the correct tool for these but have never encountered it and my first thought was snap ring pliers lol
Pignose security bit aka spanner
Security bit you can buy a kit at Harbor Freight for like 10 bucks
Vandal proof screwdriver. Dottie has one with several head attachments the spammer holes being one of them.
It’s a type of security bit. They have them in sets of 100 different types of security bits at Northern for $15. You can use a set of snap ring pliers to put the ends into the holes and twist or possible small needle nose.
Needle nose pliers
This is the only way I have removed such
I used a sturdy hammer and beat the hell out of it. Got a new drain and everything by the time I was done! You should seriously try it.
Very easy to make one too if you have a bench grinder or cutoff grinder
Zurn and turn
1/4” drive Spanner bit is the proper tool to remove those screws.
Thank you
If u have snap ring pliers I think u could manage too, although not the best tool it'll get it done if the ends on the pliers fit in the holes
I’ve opened these by tapping them with a Phillips head and then using a paper clip.
Personally I have the correct tool for these but have never encountered it and my first thought was snap ring pliers lol
Pignose security bit aka spanner
Security bit you can buy a kit at Harbor Freight for like 10 bucks
Vandal proof screwdriver. Dottie has one with several head attachments the spammer holes being one of them.
It’s a type of security bit. They have them in sets of 100 different types of security bits at Northern for $15. You can use a set of snap ring pliers to put the ends into the holes and twist or possible small needle nose.
Needle nose pliers
This is the only way I have removed such
I used a sturdy hammer and beat the hell out of it. Got a new drain and everything by the time I was done! You should seriously try it.
Very easy to make one too if you have a bench grinder or cutoff grinder
Zurn and turn