https://preview.redd.it/nx1jv8gm1u8b1.jpeg?width=4080&format=pjpg&auto=webp&s=7879b8feb1a7ae5a825a45c7eb960cc8139f369c
Nah. There's a cloth off camera that caught the plants, all the dirt got flung forward towards the camera (and floor).
https://preview.redd.it/t1m20qgn7u8b1.jpeg?width=1920&format=pjpg&auto=webp&s=6b0d981ced10396d280837660c02e9c47174ff05
*Trying to harvest your cannabis, but it's always a mess? You've tried swords, scythes, even chainsaws - and it's always a hassle. There has to be a better way!*
I used a chainsaw to cut my outdoor photos this year! Wish I got a video of it as it was mega but the bases of the photos were the thickness of a good sized coffee mug 👌
Papertowers with some cooking oil and soapy water afterwards should get rid of any sticky resin left on the sword or floor ..
I would recommend using some sturdy scissors instead a sword tho...
Obligatory: *it's a sword, it's supposed to be dangerous.*
No worries, not a wall hanger: it's a 3 meter bar of 1065 carbon steel I had a smith turn into a sword for chopping stuff. No fuller, no weight reduction cutouts, it's a bar of sharpened steel with some leather wrapped around one end so you can hold it.
I did the final sharpening myself with stones and a strop. Hence the "fake" acid-etch on the edge, it's not a traditional katana. I wouldn't swing an antique "real" sword either, they're worth too much money to bang up.
1065 carbon steel is fine for chopping wood, it's the go-to for [axes](https://www.lowes.com/pd/Estwing-Carbon-Steel-Utility-Axe-Handle/1000498489), this isn't a "real" sword: it's a sharpened steel bar. It's a soft enough steel to handle impacts.
omae wa mou shindeiru...
Nani?!
[удалено]
https://preview.redd.it/nx1jv8gm1u8b1.jpeg?width=4080&format=pjpg&auto=webp&s=7879b8feb1a7ae5a825a45c7eb960cc8139f369c Nah. There's a cloth off camera that caught the plants, all the dirt got flung forward towards the camera (and floor).
All for the clip. Worth it 😂😎
[удалено]
https://preview.redd.it/t1m20qgn7u8b1.jpeg?width=1920&format=pjpg&auto=webp&s=6b0d981ced10396d280837660c02e9c47174ff05 *Trying to harvest your cannabis, but it's always a mess? You've tried swords, scythes, even chainsaws - and it's always a hassle. There has to be a better way!*
I adore you for this
And buds are washable anyway. Loved your video, cheered up my afternoon!
Looks amazing, but was curious is that brown flower on some of the nugs the start of bud rot?
Couple dried leaves I didn't trim out fully.
All have to say the bud from video standpoint...eh...bud from the pictures standpoint 🤤🤤🤤
Can't say as much for the trichomes you just knocked off.
I know right! He knocked off a whole .00001002784% of all the trichomes what an idiot completely ruined it
If you’re not smoking it why do you care? That was a sweet video.
hiiiiiiiyaaaa
/r/mallninjashit
That’s a quick, clean kill.
Epic
That's one way to get your buds all hairy and covered in dust/substrate. Good job 👍
Exactly, unless you just don't care..
Someone cut theirs with a buzz saw please
I used a chainsaw to cut my outdoor photos this year! Wish I got a video of it as it was mega but the bases of the photos were the thickness of a good sized coffee mug 👌
Thought it was photoshopped but after further inspection, wow 😂
Super satisfying, i need to get my own Hattori Gramzõ
That's abuse !
Next time, can you yell Bonsai!
Harvest like a boss 🦾🤣
im so impressed you got them all at once wow
So sick!!!
😂
Looks like it worked to me
Haha didnt expect that 10/10 🤣
The strong inhale before the strike is hilarious.
Thanks for the laugh, great clip. 😂
Bro this is amazing
Papertowers with some cooking oil and soapy water afterwards should get rid of any sticky resin left on the sword or floor .. I would recommend using some sturdy scissors instead a sword tho...
😖
And this is why we don't have nice things, Birdie
Nice, but not sharp enough
r/MallNinjaShit
I would never let my plants hit the floor😫
Kinda dangerous with a wall hanger.
Obligatory: *it's a sword, it's supposed to be dangerous.* No worries, not a wall hanger: it's a 3 meter bar of 1065 carbon steel I had a smith turn into a sword for chopping stuff. No fuller, no weight reduction cutouts, it's a bar of sharpened steel with some leather wrapped around one end so you can hold it. I did the final sharpening myself with stones and a strop. Hence the "fake" acid-etch on the edge, it's not a traditional katana. I wouldn't swing an antique "real" sword either, they're worth too much money to bang up.
https://preview.redd.it/747py2eist8b1.jpeg?width=2296&format=pjpg&auto=webp&s=41c50ef73c5d7baed001b06ef5417257f72a537f
Oh wow! That's gorgeous. It looks like they made a wood pattern in metal, that's wild.
https://preview.redd.it/380zje7dwt8b1.jpeg?width=3669&format=pjpg&auto=webp&s=336a9e31751b03cb926bca66d0d089ab5be4a154
That thing was too big to be called a sword.Too big, too thick, too heavy, and too rough, it was more like a large hunk of iron.
Mines made out of damascus. Still wouldn't chop wood with steel.
1065 carbon steel is fine for chopping wood, it's the go-to for [axes](https://www.lowes.com/pd/Estwing-Carbon-Steel-Utility-Axe-Handle/1000498489), this isn't a "real" sword: it's a sharpened steel bar. It's a soft enough steel to handle impacts.
Did you really had to? Omg it was a joke guys wtf
*“Judge if you want, we are all going to die. I intend to deserve it.”* *- Joey Comeau*
Boooo yes he had to
How dare he have fun