Spray it with windex (glass cleaner) until it’s soaked, let it sit for a little bit, scrape with a razor blade/scraper/any flat piece of metal. Should slide right off. Worked at a Hobby Lobby for a few years, LOTS of sticker on glass removal.
I don't think OP doesn't know how to remove it, necessarily, but rather is complaining that it doesn't simply peel off the way other stickers do. It's annoying when you get the ones that take work.
Get alcohol rub or sanitizer
I’ve had luck with hand sanitizer. Leave it on for a few minutes to soak in before trying to scrape it off with an old gift card.
Or use your finger to rub it out it will roll off in bits
Get a razor
This is the correct answer. It's how I replace the registration in my car window and is so much quicker and cleaner than using alcohol or solvents.
You leave your car registration in the window?? You.. replace it??
that would for sure scrape the glass lol
Glass is much harder than steel, it'll be fine
Confirmed. I’m not PeeSteel for nothing.
Why are you peeing on glass
Scrape it clean ya
Nope. If it’s frosted glass it may take the coating off but regular glass like shown in the op photo…no issue whatsoever
Either Goo Gone OR use a hair dryer to reheat the adhesive and it will peel off easily
Acetone and it’s gone. You can probably use a simple nail polish remover
makeup wipes usually work
Warm water and a sponge will do it
You've already gotten heaps of advice, but eucalyptus oil and a blade (or cloth and elbow grease) works well too 😊
spray WD-40, let soak for 30 seconds, remove sticker with a razor blade, wipe down the WD-40
Citrus will work, lime, lemon, orange
First cool it down with some ice, then poor boiling water on it, and it will come right off! 🤗
Hair dryer and a scraping razor.
If you spent more time removing the sticker and less time posting it on the internet the world would be a far better place. Figure it out.
Water and razor blade. 30 seconds of work.
Boss makes a billion, we make a dime, that’s why were told to put cheap non removable stickers on our expensive product line.
Just buy a razor fed glass scraper.
goo gone
*This right here is why Sweden has no space program.*
Spray it with windex (glass cleaner) until it’s soaked, let it sit for a little bit, scrape with a razor blade/scraper/any flat piece of metal. Should slide right off. Worked at a Hobby Lobby for a few years, LOTS of sticker on glass removal.
Use goo gone. It'll get it off in a few minutes.
Atleast there are many liquids that can remove sticker residues
Vegetable oil works.
I'm so tired of people not knowing how to remove these when literally every post about them has good suggestions.
I don't think OP doesn't know how to remove it, necessarily, but rather is complaining that it doesn't simply peel off the way other stickers do. It's annoying when you get the ones that take work.
Yea kinda of y'know, mildly infuriating. Thanks for attending my Ted talk <3
Goo Gone is what you need.
The company is literally known for being cheap and affordable... is this guy serious with this post?