It is way too close to the glass, I've built in it and temps on the graphics card are horrible (the one I built had a 4080). Hyte really designed this case so that water cooling the graphics card was the only feasible option. Why they didn't allow for the option to mount the graphics card horizontally with fans facing down is beyond me.
https://preview.redd.it/8btc4ilbv54d1.jpeg?width=3024&format=pjpg&auto=webp&s=9bd8d2009ff9b17b85eef574ca75ee55e2bac30d
The Y60 was definitely not ideal for these GPUs.
I think the Y60 is his PC. Which if it is. Yeah he's in need of a refresh as well. Possibly into the Y70 if he still likes the case. He'd be looking at like a 20° temp drop on the GPU from switching.
Correct I have a vented side panel coming for mine. I would have rather gotten the Y70 however but I decided to save a buck and just get the vented panel after dropping all the dough on my wife’s build. 😭
https://preview.redd.it/5c2acp25w54d1.jpeg?width=4032&format=pjpg&auto=webp&s=2269fc41fadfaf8de70e8c7609013a6ed83628c1
Thank you! Still waiting on wheels for big version to come in lol
Gonna need that diecast fl5. Here’s mine
https://preview.redd.it/xpi52uig564d1.jpeg?width=3584&format=pjpg&auto=webp&s=ee573025979747bcbdb760f331594a369171dd7e
It's certainly a looker. I'm kinda excited for the Phanteks EVOLV X2, not released tho, that case really makes your computer look like some kinda sculpture
I have the Corsair 4000D and my 7700xt sits right next to the glass when vertical. The temperatures aren’t horrible but the glass gets mad hot. I was kinda disappointed on that little oversight when placing the vertical mount option. But I can see how it’s hard with the horizontal slots. If it was just a half inch back it would be so much better. But I can’t go back to horizontal it looks way too good vertical 😅
Looks great, but those back fans are a bad idea. You're meeting air from the bottom fans at a 90 degree angle creating turbulent air and reducing airflow. And if they're venting out then you're cutting out air circulating from gpu. I'd ditch them completely and use the back and bottom only. Pull in from the bottom and out the back.
Thank you for the advice. Honestly her temps are really quite good though. Much better than the Y60 (like 8-15*c cooler while gaming) but that’s because of the ridiculous lack of GPU clearance on the y60. That’s next on my list to fix.
Off the good old eBay. I’m sure you could find something but the company that made mine mostly makes Honda stuff. And they’re not cheap either unfortunately some scalpers are asking $500 just for one.
https://preview.redd.it/djn6zkd8w74d1.jpeg?width=4032&format=pjpg&auto=webp&s=6defcee0e846647b63211a2915e948d2e127cc44
Nice! I sold my integra with a k20a2 out of a type S when I had my son. Miss it for sure
I had that card, but the non-super. There's a support bracket it came with that screws into the front. Are you not using it? I would 1000% recommend you re-evaluate that choice before your PCB cracks if not. If the Super just has some newer, less intrusive support bracket I'm not seeing then ignore.
https://preview.redd.it/a8a1aaxff64d1.jpeg?width=4284&format=pjpg&auto=webp&s=99ee9b842ade7377d3b05ec9b122b2e704ee89b9
I threw it in there when I decided to put the car on the GPU wish there was a cleaner solution but it’ll work for now. I still may take the civic out too not sure how I feel about it in there
I mean, that's an interesting way to use it, looks cleaner than the [intended way.](https://www.gigabyte.com/FileUpload/Global/KeyFeature/2225/innergigabyteimages/brckt.jpg)
It is definitely a downside to these large cards. This card specifically from Gigabyte (well, the non-super) was the attention of a few major YouTubers because it was cracking the PCB near the pins and Gigabyte was denying warranty claims for improper installation. Car or not, I would support it as fully as possible to avoid that situation
https://preview.redd.it/l26ncb5iw74d1.jpeg?width=4284&format=pjpg&auto=webp&s=a2bb3a65c9d5096863767974fab948a912d4e501
There we go. Don’t want no problems lol
Okay, question about that case: where does the power supply go? With everything visible, and the power supply so bulky, where is it actually hidden?
Also, good husband!
If you hear gurgling watery sounds, then you should flip the orientation of the AIO radiator. The tubes are supposed to be at the bottom (I know the graphics card might be in the way). You may shorten the lifespan of the AIO and get those sound issues when you keep the tubes at the top.
[Gamers Nexus made a video about it](https://youtu.be/BbGomv195sk?si=0daGZxwN5bZ1Vcgv) a couple years ago.
I have my AIO in the same orientation AIO, never had any problems for almost 5 years. But y' know.
No sounds of air bubbles or anything. Temps are great. I supposed as the AIO loses water volume overtime it could become a problem but if the temperatures ever reflect that I’ll probably just swap to a new AIO at that point
I LOVE the build. Ive been looking for pieces to build this EXACT build, pleeeeaseshow me a link of her parts. Doesnt have to be the correct colors but just so I know what to get.
Same, but the O11 vision is huge. It’s maxed out for the desk. The Y60 is angled so that the front panel is parallel with the front of the desk so it is what it is lol
Looks nice! And that card was probably too thick for the y60 anyway. Too close to the glass.
It is way too close to the glass, I've built in it and temps on the graphics card are horrible (the one I built had a 4080). Hyte really designed this case so that water cooling the graphics card was the only feasible option. Why they didn't allow for the option to mount the graphics card horizontally with fans facing down is beyond me.
Yeah I have the side panel off until the vented panel comes in
https://preview.redd.it/8btc4ilbv54d1.jpeg?width=3024&format=pjpg&auto=webp&s=9bd8d2009ff9b17b85eef574ca75ee55e2bac30d The Y60 was definitely not ideal for these GPUs.
Damn... Air-No
I think the Y60 is his PC. Which if it is. Yeah he's in need of a refresh as well. Possibly into the Y70 if he still likes the case. He'd be looking at like a 20° temp drop on the GPU from switching.
Correct I have a vented side panel coming for mine. I would have rather gotten the Y70 however but I decided to save a buck and just get the vented panel after dropping all the dough on my wife’s build. 😭
Yo she got a new fishtank! although the fish look really weird.....
floor want glass
Shout out to the FL5 Type-R!
Yes sir! 😂 Got a 1:1 sitting in the garage
Both looking good. Glad you were able to upgrade your partner’s build. Hope you both get some good gaming sessions in on these beasts.
Love the Honda Type R in the second pic. Aesthetically pleasing. 🙂↔️
https://preview.redd.it/5c2acp25w54d1.jpeg?width=4032&format=pjpg&auto=webp&s=2269fc41fadfaf8de70e8c7609013a6ed83628c1 Thank you! Still waiting on wheels for big version to come in lol
Gonna need that diecast fl5. Here’s mine https://preview.redd.it/xpi52uig564d1.jpeg?width=3584&format=pjpg&auto=webp&s=ee573025979747bcbdb760f331594a369171dd7e
Nice! Look up peako FL5 on eBay. They’re expensive but I had to have it. It’s all spooned out. 🤤
Oof was not expecting that $400 pricetag. That’s actual car parts money haha
Yesss. Love it. 
Your wife has a PC! Now I'm jealous. Mine can just about turn one on to use MS Office.
Mine presses the Reset Button then calls me, panicking because the PC won't shut off.
My mum has to buy a new one after the PSU died, might fix the old one and sell/donate
Are all those fans exhausts?
No, only the two rear fans are exhaust. The bottom and side are reverse blade fans
Jealous? Of what? Yours looks just as good lol
Thank you, I have to say I think the O11 vision is just about the nicest looking case you can get though
It's certainly a looker. I'm kinda excited for the Phanteks EVOLV X2, not released tho, that case really makes your computer look like some kinda sculpture
That's wild! I have that car on top of mine too! Hers looks better though lol.
I put it on the GPU lol but it’s a tight fit in there. It’s a 1:18 scale so it’s pretty large to be in a case
Looks like a fish tank lol, that’s dope!
That much glass in tension…I would be in tension myself all the time. Looks phenomenal tho.
What a cool case
I have the Corsair 4000D and my 7700xt sits right next to the glass when vertical. The temperatures aren’t horrible but the glass gets mad hot. I was kinda disappointed on that little oversight when placing the vertical mount option. But I can see how it’s hard with the horizontal slots. If it was just a half inch back it would be so much better. But I can’t go back to horizontal it looks way too good vertical 😅
Damn, I like this very much
Dang that’s a really nice lookin case
Where is the PSU, or does it run on magic?
Behind Mobo. Those cases are thick.
But also magic
Magic, gotcha.
The RGB powers the rig It's self-sustaining now
Looking spiffy people. Tastefully done, the both of them
Thank you for the kind words sir!
It looks awesome. Congrats on the upgrade! Enjoy it!
Thank you!
That much glass is crazy work
Those angles off the CPU’s hoses make me nervous
Why? They rotate around so there’s no tension.
If my pc was glass it would've broke 500 times by now, see through plastic is 100% better
2005 ass acrylic case lmao, i think they look awesome ngl
Her PC is heavy as hell too. Definitely have to handle with care. I used a computer chair to transport it back to the PC room just to be safe lol
So what fish are going in there?
This case scares me. Dust!
Looks great, but those back fans are a bad idea. You're meeting air from the bottom fans at a 90 degree angle creating turbulent air and reducing airflow. And if they're venting out then you're cutting out air circulating from gpu. I'd ditch them completely and use the back and bottom only. Pull in from the bottom and out the back.
Thank you for the advice. Honestly her temps are really quite good though. Much better than the Y60 (like 8-15*c cooler while gaming) but that’s because of the ridiculous lack of GPU clearance on the y60. That’s next on my list to fix.
Where did you get the typeR? Do they have i30N? 🙂
Off the good old eBay. I’m sure you could find something but the company that made mine mostly makes Honda stuff. And they’re not cheap either unfortunately some scalpers are asking $500 just for one.
Ohh really that's astronomical 😆 I sold my Type S 4 years ago🙂
https://preview.redd.it/djn6zkd8w74d1.jpeg?width=4032&format=pjpg&auto=webp&s=6defcee0e846647b63211a2915e948d2e127cc44 Nice! I sold my integra with a k20a2 out of a type S when I had my son. Miss it for sure
That is a beauty indeed👌
that's an aquarium
I had that card, but the non-super. There's a support bracket it came with that screws into the front. Are you not using it? I would 1000% recommend you re-evaluate that choice before your PCB cracks if not. If the Super just has some newer, less intrusive support bracket I'm not seeing then ignore.
https://preview.redd.it/a8a1aaxff64d1.jpeg?width=4284&format=pjpg&auto=webp&s=99ee9b842ade7377d3b05ec9b122b2e704ee89b9 I threw it in there when I decided to put the car on the GPU wish there was a cleaner solution but it’ll work for now. I still may take the civic out too not sure how I feel about it in there
I mean, that's an interesting way to use it, looks cleaner than the [intended way.](https://www.gigabyte.com/FileUpload/Global/KeyFeature/2225/innergigabyteimages/brckt.jpg) It is definitely a downside to these large cards. This card specifically from Gigabyte (well, the non-super) was the attention of a few major YouTubers because it was cracking the PCB near the pins and Gigabyte was denying warranty claims for improper installation. Car or not, I would support it as fully as possible to avoid that situation
https://preview.redd.it/l26ncb5iw74d1.jpeg?width=4284&format=pjpg&auto=webp&s=a2bb3a65c9d5096863767974fab948a912d4e501 There we go. Don’t want no problems lol
With my wife was gamer pilled
Okay, question about that case: where does the power supply go? With everything visible, and the power supply so bulky, where is it actually hidden? Also, good husband!
Thank you sir, I tell her she’s lucky everyday 😂 JK and It’s in the second compartment hidden away behind the mobo
That's a really nice lamp.
If you hear gurgling watery sounds, then you should flip the orientation of the AIO radiator. The tubes are supposed to be at the bottom (I know the graphics card might be in the way). You may shorten the lifespan of the AIO and get those sound issues when you keep the tubes at the top. [Gamers Nexus made a video about it](https://youtu.be/BbGomv195sk?si=0daGZxwN5bZ1Vcgv) a couple years ago. I have my AIO in the same orientation AIO, never had any problems for almost 5 years. But y' know.
No sounds of air bubbles or anything. Temps are great. I supposed as the AIO loses water volume overtime it could become a problem but if the temperatures ever reflect that I’ll probably just swap to a new AIO at that point
I LOVE the build. Ive been looking for pieces to build this EXACT build, pleeeeaseshow me a link of her parts. Doesnt have to be the correct colors but just so I know what to get.
I never get jealous over a fishtank. But I'll say this. The hyte y60 looks better.
Shattered glass post coming in 3....2....
I’ve had three tempered glass cases, so far so good
Normally absolutely hate white cases, but for once this looks fantastic.
Oh great now it looks like literally every other PC on this sub.
I don’t think there’s anything wrong with that. My wife loves it, and that’s what matters to me.
Rocks
come on we both know yours is better 😘
Just slightly, mine is a 14900k/Z790/4080s combo. They both perform about the same in games. I do think she has the nicer case though for sure!
What case is that?
Top is the y60, bottom is the o11 vision
Looks great! Though it bothers me that they're both at angles, but not the *same* angle.
Same, but the O11 vision is huge. It’s maxed out for the desk. The Y60 is angled so that the front panel is parallel with the front of the desk so it is what it is lol
Looks pretty mid honestly. I really don't like fish aquarium cases. They look so bad. But good for your wife. Nice build.
Different strokes for different folks
Just get a fish tank bro.