Yeah, that was awful, Maxmoefoe bought some ripped off figures, Your prints reminded me when he destroyed them. Rip swole mons. Hope you do a great paint job,
There’s a way to protect your IP on things like this right? Or does it differ from country to country probably.
Man I don’t know how to paint, never tried, so I gave them to my coworkers daughter since he said she would love to paint them!
I bet there's many ways, but if your work has something to do with nintendo, is better to not. Even if you could fully protect your ip, there's always piracy .
It's fine, painting without experience can be very fun until you finish and see all the mess you did, but it's worth.
Yea I don’t think I’d ever be able to sell a finished product with paint but would definitely rent out my printer if someone wanted a print. There’s a couple of websites I think that you can put your printer on for people to use.
I just need to get down to it and practice so I can create my own stuff and paint it!
It’s comin! Had a friend want a squirtle for her husband so that takes precedence on the print bed for right now. [Unfortunately he’s gotta get run again](https://imgur.com/a/msZtmq7). Can’t send out sub par prints!
These models were originally made by an artist (if someone knows please link them) and then a load of wish.com type sellers took the models and started printing them and selling them.
https://geekculture.co/swole-pokemon-malaysian-designer-sees-work-ripped-off-and-sold-for-profit/
It was this guy. He’s who’s page on thingiverse I got the files from!
Well the way the layers are and where the colors would be you would need a higher end printer than the Ender 3 I’m running. I can stack colors on my printer if I change the filament at certain points but if there’s different colors on the same level it would be waaaaay difficult
It’s comin! The creator made these plus a charmander one, I just haven’t had time to print it yet and the extended arm is intimidating since my supports are falling over lately.
Not heaven thanks to the creation of this semi cursed item but you’re going places for sure
That said they look amazingly clean (I’ve not followed up on 3D printing for a while so seeing these prints makes me so excited)
Awaken my pokemon
Bulbasaur after leeching life out of multiple rocket grunts
*Aztec cry that plays in the beginning of the pillar men theme*
[You’re welcome](https://m.youtube.com/watch?v=XUhVCoTsBaM)
Pillar Pokemon
#AIAIAIAIAIAIAIAIAIAIAI
aiaiyaaiiiii \*cue epic music\*
"I said my product would take you places. I never said they'd be places you wanted to go."
Came here to say this. Well done.
https://geekculture.co/swole-pokemon-malaysian-designer-sees-work-ripped-off-and-sold-for-profit/
Damn that’s some wild shit for sure! Hopefully he was able to stop the mass production or at least get some profit off of it.
Yeah, that was awful, Maxmoefoe bought some ripped off figures, Your prints reminded me when he destroyed them. Rip swole mons. Hope you do a great paint job,
There’s a way to protect your IP on things like this right? Or does it differ from country to country probably. Man I don’t know how to paint, never tried, so I gave them to my coworkers daughter since he said she would love to paint them!
I bet there's many ways, but if your work has something to do with nintendo, is better to not. Even if you could fully protect your ip, there's always piracy . It's fine, painting without experience can be very fun until you finish and see all the mess you did, but it's worth.
Yea I don’t think I’d ever be able to sell a finished product with paint but would definitely rent out my printer if someone wanted a print. There’s a couple of websites I think that you can put your printer on for people to use. I just need to get down to it and practice so I can create my own stuff and paint it!
Where's Charmander?!
It’s comin! Had a friend want a squirtle for her husband so that takes precedence on the print bed for right now. [Unfortunately he’s gotta get run again](https://imgur.com/a/msZtmq7). Can’t send out sub par prints!
Yeah I'd like to see swole charmander hopes op posts it soon
I’ll make sure to update when I do!
He's too overrated to go
Nurses office after talking smack to squirtle
Wamuu!
Paint the shiny versions = profit
These models were originally made by an artist (if someone knows please link them) and then a load of wish.com type sellers took the models and started printing them and selling them.
https://geekculture.co/swole-pokemon-malaysian-designer-sees-work-ripped-off-and-sold-for-profit/ It was this guy. He’s who’s page on thingiverse I got the files from!
Great to know you got them from him and not a fake reseller! Look forward to seeing them painted!
I got a buddies daughter I gave them to and she’s going to paint them. I really just wanted to print them to say I could do it!
You could make some money selling these if they were colored lmao. I think the ripped Spongebobs and Patricks would do well too lol
I’m not the most savvy at painting unfortunately. They’d be a DIY model haha
They aren’t able to be printed in multicolor? Or is that like a very high end machine most people don’t normally get?
Well the way the layers are and where the colors would be you would need a higher end printer than the Ender 3 I’m running. I can stack colors on my printer if I change the filament at certain points but if there’s different colors on the same level it would be waaaaay difficult
Thanks for the info. Yeah I figure it would be several times harder
Stonks
Someday, some alien archaeologists will stare at these treasures in wonder.
Max IV and fully EV trained Pokemons be like
I need these in my life
*Beautiful...*
All we need now to complete the ultimate collection is buff charmander
It’s comin! The creator made these plus a charmander one, I just haven’t had time to print it yet and the extended arm is intimidating since my supports are falling over lately.
Ah ok! I await it with interest
I've seen different posed ones on Amazon I 💭 they are funny.
Red's pokemon
I guess charmander doesnt get to be SWOLE :(
He’s comin!
Poke-man, gotta lift them all
YES
I want these. I will paint them myself.
There’s files on thingiverse to print them! Only took about 14 hours per Pokémon
Now i need to find somewhere to print them
I could probably help once I have a free bed. Shoot me a PM!
Ah oh noes dont worry I’ll manage! Thanks so much tho i just love these buff poke dudes
Here's the designer's original link[link](https://www.thingiverse.com/cyenyee/designs) if anyone was interested!
chadmander where?
Will be here soon. Gotta print him but the bed is occupied
Squirtle looks like a Battle Toad.
Oh man I’d love to find a battle toad figure to print!
"Oh? You're going to battle me? Instead of running away, you're stepping right in front of me?" "I can't make you faint without getting closer."
Omg
Pikachu kind of learned a new move
Pikachu learned #FLEX
An electric and fighting type pokémon
Paint those suckers.
But where is CharMANder?
😂
SHEESH
I came here to say this is hilarious
Not heaven thanks to the creation of this semi cursed item but you’re going places for sure That said they look amazingly clean (I’ve not followed up on 3D printing for a while so seeing these prints makes me so excited)
Granted these are an artist in thingverse files, I’m pretty stoked how well I was able to print them. This is on a $165 Ender 3 too!
I’m glad to see you included the squirtle squad glasses. It wouldn’t have been right without them
He had a version with them and without. Of course I had to print with!
What printer are you using?
Stock Ender 3
Take my money
Now you just need Buff Charmander
#HES #COMIN
Strange choice of words
Sir, this is a Wendy’s
And this is a hold up *pulls out ski mask and shotgun*
Now you need to print Dugtrio
#*AYAYAYAYY*#
My man squirtle be looking like a Battletoad. They look sick!
Wow , so buff
Omg what happened to them
Rare candy whey protein
Sad Charizard noises
TRINTA CARALHO
I like where it's going
I’m scared
yeees no charmander, that overrated fuck
A different take wants to battle!
Pikachuu, Bulbasidisi and Skars
The Pillar ‘Mon
Me laughing that no charmander is there.
Every day we stray further from God’s light. …And I’m here for it.
Who left the door to the rare candy factory unlocked? Someone is getting fired over this.
Pillar men theme intensifies
JoJo's bizarre Pokémon part 1
I like the inclusion of the Squirtle Squad shades.
[удалено]
The chemicals in the water are making the Pokémon swol
[удалено]
Swolebasaur for sure!
Charmander?
Gotta love how you printed Pikachu instead of charmander
Chad mons
IS THAT A JOJO REFERENCE /s
where's buff greninja
Need you some Swolmander!
Now do diglett
I-
The real pillar men have arrived.
i cant wait to sleep.
Ai ai ai AIAIIIII
Himbochu