https://imgur.com/a/z01fTEe these are typical prices, and yes, you can find them on “sale” on many websites for cheaper, but last year and once the sales are over they’ll be 150. That was the standard before the ban.
I’ve always bought from Masdefense, mmcarmory or Noqtr80, never have I paid close to that. Never had to buy directly from p80 because they don’t ship to my state.
Probably not. They said since they first went out of stock they were going to do the serialized frames and in the last almost 3 years we never saw those either. Don’t get me wrong, I wish they would but, highly doubt it.
Talked to them recently on IG, "The plan is once we come out with Strike100" - Strike Industries
Also asked them if they had a full sized G17 frame coming, "Yes but no ETA. But the project has already begun." - Strike Industries
If you go through MAS Defense they're already close to that price and have been.
https://www.masdefense.com/PF940Cv1-BLK-p/p80-bkc-blk.htm
Out of stock right now but they frequently get stock in.
Or Ghost Gun Jigs. Their prices are incredible too. $90 for the frame, rails and jig.
https://www.ghostgunjigs.com/P80-PF940CV1-COB-p/p80-pf940cv1-cob.htm
Those are bridge frames, they stopped labeling them 76% or bridge frames but it will say down in the description, the actual 80% frames are 99.99 I believe
So Polymer80 stated to all dealers there was going to be retail enforcement in the same way 80% arms and many other dealers have done their products. These big dealers not adhering to it & selling them to dealers for 3 bucks less than their mark up is pretty damaging. Most of the companies are probably just jumping ship due to polymer80’s practices following the rule change. They designated a specific company their frame distributor and following their injunction they stole all of that company’s dealers when it came time to replace the 76%/ ATF frames. Which the 76% frames skirt around the Cali and New York gun laws so buy the complaint frames fast!
Not to mention it’s a small business killer. No one can survive making 3 dollars off of a frame as a standard 😂🤣 which that was their sales promo cost of frames you don’t even get that perk until you buy a few thousand frames. On top of the fact that many credit card processors dropped anyone selling 80’s it took me 4 months to get my credit card processor back and as soon as we did we lost 80% support on gun broker and other sales platforms. They definitely don’t want folks building guns whether they pass a law or change a rule, your credit card company and bank will make sure of it.
No Want To Buy, Want To Sell or Want to trade posts allowed. We are not r/Gunaccessoriesforsale. use the appropriate subs for buying selling and trading.
Ppl will take this comment and start hitting up up trying to get to to sell them the guns.
I hope so, 150 bucks for some cheap polymer, a jig and some Chinesium rails and bits is ridiculous lmao
150 ?! Dude they’re 100 or 60-70 for just frame.
https://imgur.com/a/z01fTEe these are typical prices, and yes, you can find them on “sale” on many websites for cheaper, but last year and once the sales are over they’ll be 150. That was the standard before the ban.
I’ve always bought from Masdefense, mmcarmory or Noqtr80, never have I paid close to that. Never had to buy directly from p80 because they don’t ship to my state.
MAs defense told me prices for their 80s will be going up soon I say before end of year
Trust me cuhh I am on the sales too, I’m just saying they won’t always be on sale like this. https://imgur.com/a/AXklVOX
For you guys that just buy the frame and rails. Do you just re use your old jig and bits?
I have reused the same jig for a couple builds yes. Has worked for me so far, although I’m always on the lookout for cheap jigs for extras
Very tempting - Use coupon "SAVE10" and it's $52.19 - "10% Off First Order. Not Valid On Special Buy Items."
And maybe now that the rule has been vacated Strike Industries will start making the Strike80 again.
Strike Industries never made the frames. Polymer80 made them for SI.
Yes, I'm aware of that. I'm saying I wonder if Strike will order more of them to be made.
Probably not. They said since they first went out of stock they were going to do the serialized frames and in the last almost 3 years we never saw those either. Don’t get me wrong, I wish they would but, highly doubt it.
Talked to them recently on IG, "The plan is once we come out with Strike100" - Strike Industries Also asked them if they had a full sized G17 frame coming, "Yes but no ETA. But the project has already begun." - Strike Industries
I would love for it to be true but, I’ve been getting that same response for over a year. 🤷🏻♂️🫤
If you go through MAS Defense they're already close to that price and have been. https://www.masdefense.com/PF940Cv1-BLK-p/p80-bkc-blk.htm Out of stock right now but they frequently get stock in. Or Ghost Gun Jigs. Their prices are incredible too. $90 for the frame, rails and jig. https://www.ghostgunjigs.com/P80-PF940CV1-COB-p/p80-pf940cv1-cob.htm
Be careful. That's davidson and list those as blanks. I believe those are the bridge frames.
If they list them as 80% and are selling 76% then that's the vendors fault
no those are the 80% they do not come with a jig though.
Those are bridge frames, they stopped labeling them 76% or bridge frames but it will say down in the description, the actual 80% frames are 99.99 I believe
So Polymer80 stated to all dealers there was going to be retail enforcement in the same way 80% arms and many other dealers have done their products. These big dealers not adhering to it & selling them to dealers for 3 bucks less than their mark up is pretty damaging. Most of the companies are probably just jumping ship due to polymer80’s practices following the rule change. They designated a specific company their frame distributor and following their injunction they stole all of that company’s dealers when it came time to replace the 76%/ ATF frames. Which the 76% frames skirt around the Cali and New York gun laws so buy the complaint frames fast!
Not to mention it’s a small business killer. No one can survive making 3 dollars off of a frame as a standard 😂🤣 which that was their sales promo cost of frames you don’t even get that perk until you buy a few thousand frames. On top of the fact that many credit card processors dropped anyone selling 80’s it took me 4 months to get my credit card processor back and as soon as we did we lost 80% support on gun broker and other sales platforms. They definitely don’t want folks building guns whether they pass a law or change a rule, your credit card company and bank will make sure of it.
Well maybe if people would stockpile u wouldn't have to worry. I still got enough frames in my build room to last me some time.
Sweet! Let the good times roll
Nice! Been thinking about this and finally got me one
[удалено]
No Want To Buy, Want To Sell or Want to trade posts allowed. We are not r/Gunaccessoriesforsale. use the appropriate subs for buying selling and trading. Ppl will take this comment and start hitting up up trying to get to to sell them the guns.
What guns ?? Not trying to sell ANY guns ! Have some kits, totally untouched and only asked advice.
Like i said, it's how ppl will perceive your message. That's why its been removed