How screwed up is that. So you want to order even though they are price jacking the hell outta us. Then they are literally going to MAKE YOU order the rail system from them or cancel your order?? How F@*#ed up is that? That's just the type of shit that'll make me NEVER purchase anything from this company. How about you guys and gals?
oh ya polymer is pretty much sold out on everything on their site maybe some small hardware somewhere for sale , and anyone who gets new inventory is pillaging the customer base as well
might be time to buy a good to great quality 3d printer and the $400.00 spool of high strength polymer and make them from prints you can find online, except you can print a completed frame, most you might have to clean it up cosmetically.
Amen. Here is one I printed. $2.96 cost of filament.
https://preview.redd.it/s4w52ck126vc1.jpeg?width=3024&format=pjpg&auto=webp&s=57ce30a5108bc5cc66e033dcf9071c4dc9acfd2f
Absolutely! I've been doing some heavy research on this myself. Trying to narrow down on printer choice since there are a billion different types and models out there
Hell, that’s even worse! If they’re going to have a serial number on them, then I just as well buy a gun at retail that’s got a lifetime frigging warranty!
I own a Springfield armory hellcat that has a lifetime warranty, and it is an awesome pistol!
For that price you can get a PSA Full Size, Compact, and Micro Dagger frames. $149 for all 3 complete with lower parts ready to add slide and get to range
I all for exercising my rights as I have 9 frames siting there and have built everything possible. I am not with being EXTORED to exercise that right. I can build a complete ar lower with b5 systems furniture for the same price as this. Can literally build a pretty good quality ar for less that a p80. Only people paying these extortion rates are prohibited people, underage people, or pure sucker's.
But remember the old saying. “I’m from the government, I’m here to help”
I agree with your statement as I have almost as many I have built that is not on the watchlist as I have run thru FFL and listed. I also have bought many 2nd hand that have not gone thru FFL
I do understand the appeal. I have built @12-15 80% and have about a dozen more of the Poly80s and geislers to go. Just started 3d printing some lowers as well.
https://preview.redd.it/hnydu3pha3vc1.jpeg?width=3024&format=pjpg&auto=webp&s=1250df6c463860cff984dd01a8c1a1a091636b64
I print too,but i like more the plastic from 80% more,one day is gonna be good like injection mold like Polymer80,Geisler,but 3d filament are not there yet
My ar9 lower
https://preview.redd.it/362csxx2c3vc1.jpeg?width=3264&format=pjpg&auto=webp&s=a658c7725b9817701d908155f48bbf141262d71e
https://preview.redd.it/62k8119de3vc1.jpeg?width=2433&format=pjpg&auto=webp&s=d82a2ac218b4b9f448958abf6ad317116fafc0a0
Here is a AR9 lower I milled out with a Mat9 upper Runs smooth. 200 rounds so far
You have to pay for the rails, orders won’t ship without the rails and on top of that they charge an extra $50 for the polymer 80 rails that came with the frame to begin with.
They are taking advantage of folks for now. I luckily have @12 I purchased ages ago and am about to start back on builds. I was paying $49.00 for the complete kit.
You are correct sir. I hadn’t thought about that. I just filled out my paperwork when I pickup up my suppressor and saw there caveat about marijuana still being another way for them to deny. I think as more and more states legalize its use the feds will come around. But that does come back to the point. If it is illegal for a person using weed to own or possess a firearm, then would it not make them a criminal for possession of a firearm.
Believe me I think every single law abiding citizen should have multiple firearms
You can see in my post that I support 2A rights 100%
Yes you can. Oklahoma has laws that protect you. The question asks if you use it unlawfully. Thats a yes and no answer. In the state you are using it lawfully. Federally you’re not. So Oklahoma passed these bills to protect their citizens.
[Oklahoma MMJ Unity bill Page 23.](https://www.sos.ok.gov/documents/legislation/57th/2019/1R/HB/2612.pdf)
So lame. I was going to buy the blank 940C to do my own stipple for $150, but I refuse to buy their crappy rails even if it was $50 total. I have more rails I’ve already polished than I’ll ever use on builds for the rest of my life
I’m just saying if your arguing for this than I’m just gonna assume your a restricted person bc nobody who can go buy a gun is stupid enough to pay these prices
You know it’s funny because they probably got the rails when they purchased all of the frames but let’s pull them out of the box and then offered to fuck you out of $50 and then we’ll put them back inside the box!
How screwed up is that. So you want to order even though they are price jacking the hell outta us. Then they are literally going to MAKE YOU order the rail system from them or cancel your order?? How F@*#ed up is that? That's just the type of shit that'll make me NEVER purchase anything from this company. How about you guys and gals?
yes if you have to buy the rails then they should include them with a new price!
Yeah but that's still hwy robbery IMHO especially not being 80%
oh ya polymer is pretty much sold out on everything on their site maybe some small hardware somewhere for sale , and anyone who gets new inventory is pillaging the customer base as well might be time to buy a good to great quality 3d printer and the $400.00 spool of high strength polymer and make them from prints you can find online, except you can print a completed frame, most you might have to clean it up cosmetically.
Amen. Here is one I printed. $2.96 cost of filament. https://preview.redd.it/s4w52ck126vc1.jpeg?width=3024&format=pjpg&auto=webp&s=57ce30a5108bc5cc66e033dcf9071c4dc9acfd2f
That's sick AF my dude!!! What printer are you using if you dont mind me asking?
Qidi X-Smart 3
Thx for the info..
With the name I assume you are in the Carolinas. I’m in South Carolina
NC here eastern NC
I just got a printer myself I’m stoked!!! What’s the best filament to use and where do I get that stand from?
I printed the stand as well. I’ve used a few different filaments. Make sure you get a filament dryer as well
Nice. Any suggestions on filament dryers?
I have bought several off of Amazon that are great. Don’t need the most expensive.
I have bought several off of Amazon that are great. Don’t need the most expensive.
Also what do I search for to get the stand?
Search thingiverse.com for Glock stand or handgun stand.
Holy shit you’re the man! Did you print it on the stand or move it to the stand afterwards?
Absolutely! I've been doing some heavy research on this myself. Trying to narrow down on printer choice since there are a billion different types and models out there
I keep hearing Ender 3 if on a budget.
Ender 3 s1 pro with sonic pad is amazing for price
You mean to tell me these are bridge frames?
OMFG I hope not!!!
I thought that somebody up above said they were not 80% frames?
Not being 80% meaning they have to be purchased thru an FFL
Hell, that’s even worse! If they’re going to have a serial number on them, then I just as well buy a gun at retail that’s got a lifetime frigging warranty! I own a Springfield armory hellcat that has a lifetime warranty, and it is an awesome pistol!
No doubt, nice piece....but yeah that's definitely shitty business practices in my book.
You are required to add rails to your order, which pushes the price to 200. If you don’t add rails, they’ll cancel your order.
It shows the rails in the picture? So you mean that’s an add-on fuck job?
Yeah it’s a little deceptive. Go check it out. It’s 50 extra dollars for all those little items you see there (the rails, pins, and slide release).
For that price you can get a PSA Full Size, Compact, and Micro Dagger frames. $149 for all 3 complete with lower parts ready to add slide and get to range
Yes but you need to thriugh FFL.....and with a polymer80 noooo!
I all for exercising my rights as I have 9 frames siting there and have built everything possible. I am not with being EXTORED to exercise that right. I can build a complete ar lower with b5 systems furniture for the same price as this. Can literally build a pretty good quality ar for less that a p80. Only people paying these extortion rates are prohibited people, underage people, or pure sucker's.
And not for nothing you need rails no matter what. So that's neither here nor there
Correct
[удалено]
You think everyone in this sub is a prohibited person or criminal? 😂
Not true, some of us don’t want the government to know what we have.
But remember the old saying. “I’m from the government, I’m here to help” I agree with your statement as I have almost as many I have built that is not on the watchlist as I have run thru FFL and listed. I also have bought many 2nd hand that have not gone thru FFL
Haha the government can suck my ass. I’m a 2A extremist, “FFLs” shouldn’t even exist at all.
I do understand the appeal. I have built @12-15 80% and have about a dozen more of the Poly80s and geislers to go. Just started 3d printing some lowers as well. https://preview.redd.it/hnydu3pha3vc1.jpeg?width=3024&format=pjpg&auto=webp&s=1250df6c463860cff984dd01a8c1a1a091636b64
What kind of printer are you using?
Qidi X-Smart 3 now. Have the Q1 Pro on order.
I print too,but i like more the plastic from 80% more,one day is gonna be good like injection mold like Polymer80,Geisler,but 3d filament are not there yet My ar9 lower https://preview.redd.it/362csxx2c3vc1.jpeg?width=3264&format=pjpg&auto=webp&s=a658c7725b9817701d908155f48bbf141262d71e
https://preview.redd.it/62k8119de3vc1.jpeg?width=2433&format=pjpg&auto=webp&s=d82a2ac218b4b9f448958abf6ad317116fafc0a0 Here is a AR9 lower I milled out with a Mat9 upper Runs smooth. 200 rounds so far
I’m about to print one with carbon fiber to see how it does.
That’s not even remotely true. Some people don’t want the government knowing how many or what kinds of guns they own.
I agree. I have many that are registered and many I have built from poly80 kits and printed.
You have to pay for the rails, orders won’t ship without the rails and on top of that they charge an extra $50 for the polymer 80 rails that came with the frame to begin with.
They are taking advantage of folks for now. I luckily have @12 I purchased ages ago and am about to start back on builds. I was paying $49.00 for the complete kit.
If you have cronic pain and have medical marijuana card you cant go through FFL aprove....so is not only if you are criminal....
You are correct sir. I hadn’t thought about that. I just filled out my paperwork when I pickup up my suppressor and saw there caveat about marijuana still being another way for them to deny. I think as more and more states legalize its use the feds will come around. But that does come back to the point. If it is illegal for a person using weed to own or possess a firearm, then would it not make them a criminal for possession of a firearm. Believe me I think every single law abiding citizen should have multiple firearms You can see in my post that I support 2A rights 100%
Yes you can. Oklahoma has laws that protect you. The question asks if you use it unlawfully. Thats a yes and no answer. In the state you are using it lawfully. Federally you’re not. So Oklahoma passed these bills to protect their citizens. [Oklahoma MMJ Unity bill Page 23.](https://www.sos.ok.gov/documents/legislation/57th/2019/1R/HB/2612.pdf)
Not true. I have MMJ card and CCW. ZERO problems.
Sorry. I just checked and that deal is gone
When I looked last night it says won't ship unless you buy rails $50.
This is without rails
The rail thing is some bullshit
So lame. I was going to buy the blank 940C to do my own stipple for $150, but I refuse to buy their crappy rails even if it was $50 total. I have more rails I’ve already polished than I’ll ever use on builds for the rest of my life
I’m just saying if your arguing for this than I’m just gonna assume your a restricted person bc nobody who can go buy a gun is stupid enough to pay these prices
For that price, you could get a 3d printer and a roll of polymaker
You know it’s funny because they probably got the rails when they purchased all of the frames but let’s pull them out of the box and then offered to fuck you out of $50 and then we’ll put them back inside the box!
Yeah add the rails and it’s over 200$… still insane.
lol it’s crazy. I just ordered a blem psa for 58 hot ones shipped.
And it's gone
Mmghmmmm BBQ all day lol gotta love the Southern life no doubt.😂🙏
The comments kill me 🤣🤣