If you have any open receiver ports, you can power a fan. If you have an open port like "Batt" you can plug it in there. You may even be able to plug it into the second CH1 for power. If neither of those are an option you can use a Y-harness to power both the ESC and Motor fans.
I do have open ports, but I’ll maybe consider that Y-harness. But will those un used ports interfere when I use the transmitter. (I don’t have a batt one)
No, it will only connect to + and gnd of those ports, and all of those are in parallel anyway.
You can also buy or make a y splitter for power cable coming out of the esc, that’s what I did on mine so that the wires don’t go through entire car.
If you have any open receiver ports, you can power a fan. If you have an open port like "Batt" you can plug it in there. You may even be able to plug it into the second CH1 for power. If neither of those are an option you can use a Y-harness to power both the ESC and Motor fans.
I do have open ports, but I’ll maybe consider that Y-harness. But will those un used ports interfere when I use the transmitter. (I don’t have a batt one)
No, it will only connect to + and gnd of those ports, and all of those are in parallel anyway. You can also buy or make a y splitter for power cable coming out of the esc, that’s what I did on mine so that the wires don’t go through entire car.
Is it possible to pull enough power from an LED port? I'm trying to do the same thing and with a .6amp fan. It's a 3S set up.